Asked by: Mercedes Eikmeier
home and garden smart home

Does BGE install thermostats?

Last Updated: 27th February, 2020

When you enroll in the PeakRewards program, you agree to help ease high electricity demand by allowing BGE to cycle your air conditioning on and off with a professionally installed programmable thermostat or outdoor switch.

Click to see full answer.

Subsequently, one may also ask, how do I set my BGE thermostat?

  1. Login. Visit BGE.COM and sign in to your account.
  2. Access. On the "My Bill & Usage" page, under the "My Programs" section, click the "PeakRewards" link.
  3. Update.
  4. Select the "Adjust Thermostat" tab at the top of the screen, then select the thermostat you wish to adjust.
  5. Click "OK" to confirm temperature change.

One may also ask, what is the hold function on a thermostat? The "hold" function basically lets you override the pre-set temperature and thermostat setting if your schedule changes. For instance, if you have a day off in the middle of a workweek and are at home, you can press the “hold” button to lock the current temperature in while you are in the house.

Secondly, how do I get my thermostat off hold?

To cancel the temporary setting, you need to press 'Cancel', then press 'Hold' in order to permanently adjust the temperature. This will override the temperature settings for all time periods. The 'Hold' feature turns off the program schedule and allows you to adjust the thermostat manually, as needed.

What type of operating system runs a smart thermostat?

The Smart Thermostat app runs on iOS version 10 and Android version 5.0 or above.

Related Question Answers

Lynne Meierjohann


How do I set my thermostat to permanent hold?

By clicking on the "Hold Until" message, a user can set when the temporary hold will expire and have the thermostat resume its normal schedule. A user can also press the "Hold Until" message and then choose "Permanent Hold" to set a permanent hold on the thermostat.

Agnes Keilty


Can I override recovery mode on my thermostat?

A programmable thermostat is the only type I know of that has a recovery period, So the answer is absolutely yes, you may override it. If it is 80° in your house and you want it at 75, you cannot change the temperature on the thermostat and magically make the House 75°. That is the whole point of the recovery period.

Milo Azabal


How do you set a thermostat?

  1. Shut down heat or air conditioning 20 to 30 minutes before you leave home each day.
  2. Turn on heat or air conditioning 20 to 30 minutes before you come home each day.
  3. Reduce the heating or cooling 60 minutes before you go to sleep each night.
  4. Increase heating or cooling about 30 minutes before you wake up each morning.

Xisela Deluca


What model is my Honeywell thermostat?

Flip the thermostat itself over and look for the model number, which should be printed somewhere on the back of the case. Thermostat model numbers all begin with T," "TH," "RTH" "C," or "CT." Oftentimes, there will be a "Y" in front of the model number.

Hizan Poinsot


Why does my thermostat say permanent hold?

Why does the thermostat saypermanent hold”? It says permanent hold because you have disabled the automatic temperature setting function of the thermostat. In normal operation, the thermostat will change the setpoint based on the time of day or an occupancy sensor.

Eustoquio Grimmeisen


How do I reset my thermostat?

Here are the steps you need to take to reset your AC thermostat.
  1. Shut Down Your AC at the Thermostat. The first step in resetting your AC thermostat is to turn it off at the AC unit.
  2. Find Your Circuit Breaker Box.
  3. Reset the Circuit Breaker for Your AC Unit.
  4. Wait 30 Seconds.
  5. Turn the AC Thermostat Back On.

Rafayel Laarss


Why is my Honeywell thermostat not working?

A Honeywell thermostat may be malfunctioning generally, and this is the cause of its inability to hold temperature. If your screen is blank and unresponsive, or flashing, it may mean your thermostat's batteries are dying. Dirt or debris within the thermostat can also cause problems.

Yenifer Tiebes


Is it better to keep your thermostat at a constant temperature?

In most cases, leaving the thermostat temperature constant is aimed at keeping the thermal energy (heat) inside the homes constant. Consequently, inside the house will often be warmer than the outside. The higher the temperature difference between the two points, the faster the heat loss to the surrounding area.

Leola Schoierer


How far should the thermostat be from the return?

Mounting a thermostat near a return won't cause any issues because the air returning to the furnace is at room temperature. The return duct should be positioned near the floor or ceiling, which will provide several feet between the thermostat and the moving air.

Illart Noll


How do I set my Honeywell thermostat to cool?

Press the "System" button to put the thermostat in Heat, Cool or Off mode. To change the setting, push the button again. The screen will display the setting you've selected. On the right side of the display, the up and down arrow buttons operate the temperature settings.

Lucidio Tonon


How do I set my Honeywell thermostat to hold run?

Nope! This is where the “Hold” button on your thermostat comes into play. By pressing “Hold”, your thermostat will lock in the temperature it's currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.

Jinfen Czerwinski


What is leave on thermostat?

Leave is the time period you can set for an energy-saving temperature while you are away at work or school. (This will be a lower temperature during heating season, and a higher temperature during cooling season.) Return is the time the thermostat turns on the heating/cooling equipment after an energy saving period.

Habibou Nairn


Why does my thermostat change by itself?

If so, then you've come to the right place. There are several reasons why your HVAC thermostat keeps changing temperature on its own, but the most likely cause is you have it in program mode. The word 'hold', or 'permanent hold', or something similar should appear on the digital thermostat.

Wilzon Tropinin


How do I reset my old Honeywell thermostat?

If you are having a Smart or Lyric Round Honeywell Thermostat then you need to press and hold the “cloud' icon. You will see an arrow down “↓” button then press that until you get a Reset option. Select “Reset”.

Excelsina Mendigain


What does Prog mean on air conditioner?

SYSTEM Button: Selects AUTO (Heat/Cool), COOL, OFF, HEAT or EMER. PROG Button: Program setup mode, selects setpoint time, temperature and fan setting for each program.

Natalie Trager


What is hold on Honeywell thermostat?

A Hold message on a Honeywell Thermostat tells the thermostat to maintain the HVAC system for the building at a set temperature. The temperature will be maintained until the Hold expires or the temperature is manually changed. A Hold can be temporary or permanent depending on its setting.

Irasema Woodham


What does set mean on a thermostat?

A thermostat activates your furnace or air conditioner to come on at pre-set times determined by temperature changes in your home or office. Energy experts agree that setting your thermostat to adjust to different temperatures when you're home and away helps to save money on utility bills.

Marin Kahlenborn


What features apply to smart thermostats?

From Wi-Fi capability to energy reports, look for these six features in a smart thermostat.
  • Wi-Fi Capability.
  • Smart Setback.
  • Energy Reports.
  • Indoor Air Quality Control.
  • Zoning Systems.
  • Automatic Software Updates.

Aundrea Shmulik


Are smart thermostats worth it?

There are a couple of ways a smart thermostat can help save money on your energy bill. First, programming your thermostat correctly can save you almost $200 a year alone. Analysis conducted by ecobee on their customers' data found that some smart thermostat users saved up to 23% on their heating and cooling costs.