Asked by: Tajinder Seckel
hobbies and interests woodworking

Can paneling be used for ceiling?

20
Installing wood paneling on a ceiling is an excellent way to finish a room and add some subtle drama. Wood paneling is often used on a ceiling that is vaulted or has exposed beams, but this material can be installed in any room.


Likewise, people ask, what materials can be used for a ceiling?

The material used for a ceiling should be appropriate for the room's purpose, and there is no shortage of ceiling materials to choose from. Some common choices are drywall, plaster, wood, tile and metal. Popcorn is a common ceiling texture.

Likewise, what kind of wood is used for ceilings? Varieties of Wood While pine is the most common wood used in home applications, others are more distinctive. Cypress and cherry are two such options. Since you won't be walking on the ceiling, the wood doesn't have to be able to take much abuse, giving you more choices.

Then, can you use hardboard for ceiling?

Hardboard is a construction material consisting of wood particles that are compressed together tightly. It is similar to plywood, but the surface has a finished appearance, making it unnecessary to cover it. When installing hardboard on the ceiling, secure it firmly to the joists to prevent sagging.

Can you use plywood for ceiling?

You can install plywood over drywall or directly to ceiling joists.

Related Question Answers

Marcelino Castañeira

Professional

How do you cover an uneven ceiling?

Leaking areas on the ceiling or flaking drywall must either be repaired or replaced before coating it with textured paint.
  1. Cover furniture and other room objects with one or several drop cloths as needed.
  2. Tape off the corners where the ceiling meets the wall.
  3. Put on a pair of rubber gloves.

Pascualina Reisinho

Professional

What kind of ceiling is best?

These Are the Best Ceiling Types for Every Home
  • Cove Ceillings. Tasmin Johnson.
  • Barrel-Vaulted Ceilings. Commune Design.
  • Cathedral Ceilings. PHOTO: Tom Ferguson; DESIGN: Arent & Pyke.
  • Ceiling Trays. Jonny Valiant.
  • Coffered Ceiling. ANNIE SCHLECHTER.
  • Speciality Moldings. Studio Razavi.
  • Beamed Ceilings.
  • Flat Ceilings.

Magomed Hellbrucker

Explainer

What can I put on my ceiling instead of drywall?

The following alternatives are not always cheap or easily installed, but they lack the many flaws which drywall suffers from.
  1. Brick and Masonry. © Photographee.eu / Fotolia.
  2. Cement Board. Photo Credit: Michael Holley.
  3. Lath and Plaster. © Richard Blackwater / Fotolia.
  4. Veneer Plaster.
  5. Wood.
  6. Ceiling Planks.
  7. Drop Ceilings.

Amath Samans

Explainer

How do you redo a kitchen ceiling?

Steps:
  1. Demolition. Remove all the old ceiling tiles and frames.
  2. Frame it out. Starting against one wall, build the new ceiling frame just low enough to clear the pipes and vents against the ceiling.
  3. Run the lighting.
  4. Hang the drywall.
  5. Tape and block.
  6. Inside corners.
  7. Finish.
  8. Sand, prime and paint.

Jilali Zhirnikov

Explainer

How long does pop ceiling last?

15-20 years

Balduino Valadares

Pundit

How do you lower a ceiling?

How to Lower a Ceiling With Wood Framing
  1. Remove the material that covers the wood framing, such as the drywall or tiles.
  2. Measure the length of each joist that runs across the ceiling.
  3. Add the number of inches by which you would like to lower the ceiling to the width of the ceiling joist, and get wood boards in this size.

Jeremie Zarpellon

Pundit

Can you use beadboard paneling on ceiling?

A beadboard ceiling can be used to level out an uneven ceiling by adding shims. Although beadboard is typically thought of as a wall material, it's great for ceilings as well, and it's relatively inexpensive. By using tongue and groove beadboard, you can hide the nails for cottage feel with a seamless look.

Rogers Trevisani

Pundit

Can you put flooring on a ceiling?

Although you won't need to worry about constructing a subfloor, wood floor ceilings still require support. Contractors can install wood flooring planks over a flat drywall ceiling in good condition. Wood flooring planks can also be installed on an exposed ceiling.

Theola Sanmugasunderam

Pundit

Can I use plywood instead of drywall?

Plywood is a viable alternative to drywall for walls and ceilings. If you are planning on redoing your walls or ceilings, the typical materials you'll use include Sheetrock or finished plywood. Each has its benefits as a building material and in some cases, finished plywood is the better alternative.

Graciliana Chikichev

Teacher

How do you hang beadboard paneling on a ceiling?

  1. Measure the ceiling and locate the ceiling joists. You can use a stud finder or just drill holes in the drywall until you hit resistance.
  2. Cut down the beadboard (including cut outs for lights and vents).
  3. Install beadboard.
  4. Measure, cut, paint and install border boards.
  5. Add trim boards.
  6. Caulk, fill nail holes and paint:

Ylena Hayyim

Teacher

What is beadboard ceiling?

Beadboard ceilings are essentially panels of wood which offer a tongue-and-groove design, or bead, appearing as long, thin boards or as wide as 6” on center across the surface or ceiling and are commonly made of pine. The installation of beadboard onto the ceiling can be a terrific focal point for any room.

Laverne Otradnov

Teacher

Can you use beadboard instead of drywall?

Also remove and save any window trim that will be in the way. The moldings will be replaced over the beadboard in the finished project. Beadboard may be installed over drywall or old plaster providing these materials are solidly attached to the wall framing.

Dmytro Zuzuarregui

Teacher

Which way should beadboard run?

This is an important step: Backpriming the boards, for example, helps prevent moisture from passing through and blistering the finish on the front face. Then determine which direction the ceiling joists run so the beadboard can be installed perpendicular to them. That 90-degree alignment provides a joist every 16 in.

Lizette Tsel'Ko

Reviewer

How do you cover plywood seams?

Seams between sheets of plywood are sometimes necessary to cover up.

How to Hide Seams in Plywood
  1. Sand down the plywood, particularly around the edges where the pieces meet at the seams.
  2. Wipe down the areas where you sanded with a clean rag.
  3. Measure the length of the seams between the pieces of plywood.

Juanma Osset

Reviewer

How do you hang OSB on a ceiling?

Re: How to hang 4X8 OSB on ceiling
Make a metal piece that will screw to the ceiling joists on one end. shape it like a piece of z channel so that there is a deep lip to insert the OSB into. Slip the OSB into the bracket, and lift the other end, and screw it into the rafters.

Nissrine Klodginsk

Reviewer

How do you remove plywood from a ceiling?

Continue to pry nails or loosen screws; remove them until all fasteners are out of one plywood sheet. Keep one hand on the plywood sheet to prevent it from falling on you. Allow the plywood to fall away from the wall studs enough to allow your hands room to grasp the edges and lift away from the wall.

Shengjie Rocandio

Supporter

How do I speed up my hardboard?

To install hardboard over masonry, attach long wooden strips along the base and top of the wall, using masonry screws. Install vertical strips of wood every 16 inches on top of the wall studs and attach with masonry screws. Install the hardboard panels on top of the wood furring strips.

Huili Kausar

Supporter

What is beadboard?

Beadboard is a decorative style of wood paneling that has evenly spaced grooves on the surface. It's popular for use in cottage or Cape Cod style homes and furniture. Beadboard is usually installed vertically, although some people install it horizontally for a different look.

Tobias Garabato

Beginner

How do you attach plywood to a garage ceiling?

With that as a starting point, follow these easy steps to install your plywood ceiling.
  1. Step 1 - Measure. Start by measuring the length and width of your garage.
  2. Step 2 - Cut. Cut the plywood sheet to the correct size using your circular saw or table saw.
  3. Step 3 - Hang the Plywood.
  4. Step 4 - Complete the Ceiling.

Co-Authored By:

EveryThingWhat Staff Editor

8

6th April, 2020

28

85% of readers found this page helpful.

4.7/5

Click a star to add your vote

Similar Asks
Trending