Asked by: Tayeb Lauwers
home and garden interior decorating

Can you mix wood and tile flooring?

And the good news is that you can easily access hardwood flooring with existing hardwood or you can mix two different types of hardwood tiles together for your better home. Installation is also depends upon your budget and size of carpet flooring.

In this manner, what tile goes well with wood floors?

Floors are often installed piecemeal over the years. Hardwood might be installed in the living room because wood is beautiful and warm underfoot. In the bathroom and kitchen, ceramic or porcelain tile might be installed, since tile is supremely moisture-resistant.

Also Know, how do you match wood floors to tile? I do recommend keeping in a similar/complementary color palette - for example, if you do very dark wood floors, a tile color with a gray undertone would coordinate with the dark, cooler tones of the wood. -Similarly, a warmer, lighter wood tone would coordinate very well with a white wash finish in the other material!

Herein, can you put wood tile next to wood floor?

You will NEVER find a faux wood tile that will look identical to your existing oak flooring (or any wood flooring for that matter) and therefore, this eliminates that option right away.

Should flooring be the same throughout the house?

Using the same flooring throughout the space will create a clean, continuous appearance. DON'T: Forget about your home's architectural integrity. By all means, make your home a reflection of your personal style. It's equally at home in both classic and contemporary abodes.

Related Question Answers

Kenza Cadrecha


What kind of flooring looks good next to hardwood?

As with carpet, tile is also a great choice to pair alongside hardwood flooring. This is common for bathrooms, kitchens and foyers, where the tile might hold up to high traffic and water damages more gracefully than hardwood. When pairing these two, it's even more imperative that the two hues complement each other.

Priya Urevich


How do you match a tile floor?

Lift or chip out a piece of the tile to be replaced. The piece should be big enough to see and match the color and pattern. Note the thickness of the tile. A thinner tile can be used to replace it by building up the mortar underneath it, but a thicker tile will not be flush with the existing tiles.

Tracey Bluml


Can you mix different wood floors in a house?

While using the same flooring throughout your home creates a sense of space, it's not necessarily the way to make the most of each individual room. Not only can you combine different woods for the flooring in your home, but you can also mix and match woods elsewhere, such as the furniture and cabinets.

Doua Lukasz


Do wood floors have to match room to room?

Unless you regularly have interior designers over to your house, few of your guests will notice that your floors don't match, provided the different woods don't actually meet anywhere. If you do have different colors of wood in adjoining rooms, add a border to each room in the color of the other room's floor.

Analiza Gotthans


Should I install hardwood or tile first?

Order of Installation
One consideration is that wood is easier to install compared to tile. Also, once tile is down in concrete and set up, it is there to stay, while hardwood may be installed in floating format and adjusted more easily.

Madelen Becker


What goes with wood floors?

What Goes With Dark Wood Floors?
  • White walls and light wood furniture.
  • Match furniture legs to the floors.
  • Mixed woods and white.
  • Rich wall color and kilim rug.
  • Dark rug, light walls.
  • Marble, white, bronze and wood.
  • Bright hue plus white.
  • “Muddied” hues and layered textures.

Albita Gelbrich


What tile goes with hickory floors?

Warming Up to Ceramic
If your hickory cabinets have a golden tinge or white-washed finish, red ceramic floors offset them attractively. If the cabinetry is reddish in color, flip the scheme, using gold or white ceramic tiles for winning warmth.

Xiaoshuang Nallet


How do you match laminate wood flooring?

When laminate or engineered flooring is involved, try and match the faded tones of the existing floor to new products being installed. Gather samples with different intensities of the same color, then pair them with the existing, faded floor. Choose whichever sample is closest in color to the existing floor.

Barry Alamillos


Can you put wood floors in a kitchen?

Yes, you can install solid hardwood flooring in kitchens. However, if practicality is your priority, look toward plank vinyl or ceramic tile. Site-finished flooring protects the underlying wood better than pre-finished.

Mamun Brendgens


Should kitchen floor match rest of house?

You should keep the flooring in your kitchen different if: Carpet is installed throughout the other areas of your home. The kitchen is closed off from the rest of the home. The kitchen floor is on a different level from the other areas.

Janyce Weisnich


Are transition strips necessary?

If you are dealing with two different types of floor coverings, a transition strip is almost always required. You can purchase genuine hardwood transitions, even if the floors you are connecting are not wood. For laminate flooring, you can purchase transitions that look just like your laminate.

Loreen Lampke


Should kitchen floor match living room floor?

Living Areas
Off the foyer, the living room flooring can be sculpted carpet, wood, cork, bamboo, laminate, tile or stone. The key is to match the color of the floor with the entryway, as one flows into the other. An exact match isn't necessary as long as the hues blend.

Bosco Rogan


Should tile Run same direction as hardwood?

It may be most visually pleasing to lay the tile in the same direction as the hardwood if the floor space is continuous, open, elongated, the hardwood/tile color and style are similar, and the transition strip will give a “seamless” appearance.

Abdelhila Christofzik


How do you install transition strips to wood?

Apply a 1/4-inch bead of flooring or construction adhesive along the center of the expansion joint. Place the transition strip in the expansion joint and press down firmly. Adjust the transition strip so it covers the unfinished edge of the laminate flooring and the edge of the old flooring.