Asked by: Vasile Fuhs
style and fashion bath and shower

Can you replace a regular tub with a jetted tub?

A standard tub can range from $300 up to over $1000, depending on quality, brand and size, while a Jacuzzi tub could cost you from $600 to over $5000 depending on the features, the size, brand and quality. But is it even possible to replace your existing tub with a jacuzzi tub ? Yes it is.

Just so, how much does it cost to replace a jetted tub?

The average cost to install a jetted bathtub falls between $900 and $18,000 while a whirlpool hot tub installation is between $1,600 and $23,000. The primary difference is in the cost of the tubs themselves, though hot tubs take longer to install, incurring larger costs.

Furthermore, how do you turn a regular tub into a Jacuzzi? 4 ways to turn your bath into a hot tub
  1. Buy a machine that produces bath jets. There are lots of devices out there which can be fitted to a bath to produce bath jets and bubbles.
  2. Upgrade to a whirlpool bath.
  3. Use a massage mat.
  4. Create lots of bubbles the cheap and easy way.

One may also ask, can you take jets out of tub?

For removal, you may just need to rotate the jet counterclockwise until it pops out of the jet well. If you can't easily remove it by hand, use a wrench. Tighten the wrench on your jet to get a good grip. Turn the wrench counterclockwise to loosen your jet until it becomes loose enough to pull out of the tub.

What can you use in a jetted tub?

You can use bubble bath in both types of tub, but you must do so sparingly to prevent an overflow of foam in your bathroom. You must also be diligent about cleaning the jets. Although bubble bath is acceptable in jetted tubs, bath oils and salts are recommended only in air-jetted tubs.

Related Question Answers

Jeisson Liphardt


Does Home Depot install tubs?

Walk-In Tub Companies Our professional walk-in tub installers, backed by The Home Depot, provide quality installation services for bath safety products.

Casiano Ernesti


Can you add jets to an existing bathtub?

Converting your existing bathtub requires an access for the whirlpool pump and hydro-jets. Your bathtub does not need to be removed. The whirlpool venturi jet bodies can be retrofitted into the recesses of your tub. Installation is even easier if you are remodeling and have the tub outside the wall.

Nisha Talitskikh


Are Jacuzzi tubs outdated?

Soak Tubs & Air Jets Are Replacing Whirlpool Tubs in Popularity. In a recent NAHB survey directed at home builders, whirlpool tubs made the list of Top 10 Features Least Likely to Be Installed in a Home. That being said, soaking stubs and spa-like master bathroom designs are still trending.

Manahil Atlas


Is a Jacuzzi tub worth it?

If you suffer from chronic joint or muscle pain, or find home hydrotherapy helpful, this type of tub might be just right for you. Choosing a low-maintenance, air jet model or high-end, whirlpool tub can help reduce stress, maintenance and elbow-grease related to cleaning.

Daila Estalella


Can you break a cast iron tub?

Break the tub apart with a sledgehammer if you don't want to keep or sell it. Start by covering the cast iron with a heavy blanket or towel. Use a reciprocating saw to cut the tub into pieces if you don't want to damage your flooring. You can also use a combination of a saw and sledgehammer for great results.

Basel Hennig


How much does a small bathroom remodel cost?

To remodel a small bathroom, the national average cost is between $1,250 and $3,500. Smaller spaces mean less material, labor or installation costs. Simple projects like tile replacement, sink replacement, and updating light fixtures can improve the look and feel of your bathroom at a lower cost and time commitment.

Mansoura Orts


How much does it cost to remove a Jacuzzi tub?

Cost to Remove a Bathtub
Item details Qty Low
Unused Minimum Labor Balance of 2 hr(s) minimum labor charge that can be applied to other tasks. 0.0 h $0
Totals - Cost To Remove Bathtub 1 EA $60
Average Cost per Bathtub $60.31

Gertraud Groten


Carmencita Wanke


Can you use Epsom salt in a jetted tub?

Adding Epsom Salt to the bath water helps the body to recover from physical activity, soothes sore muscles, eases aches and pains, softens skin and relieves stress. Jacuzzi® Epsom Salt is intended for use in soaking bathtubs, as well as Jacuzzi® Epsom-salt compatible jetted bathtubs.

Mohsen Juchenko


How often should you clean a jetted tub?

Clean your jetted tub every 1-3 months if you use your tub daily or several times a week. Clean it at least once every 6 months if you only use it a few times a month.

Adham Alvarez De Sotomayor


Are jetted tubs sanitary?

Short answer – yes whirlpool tubs are clean
Over time these pipes would bow down due to the weight of the hot water running through them. Water would not drain out properly allowing bacteria to grow in the sitting water. The next time the whirlpool would be turned on this black crud would come out.

Son Inurritegui


What is the black stuff coming out of my Jacuzzi jets?

The black flakes are mold and mildew, bacteria from human skin, oils, soaps, and other junk (use your imagination) that have been allowed to spawn in residual water left behind within the piping from the last time the unit was used.

Encarni Nebig


How do I clean the jets in my bathtub?

Fill the tub with hot water to at least three inches above the height of the jets. Add two to four teaspoons of powdered dishwasher detergent (or another low-foaming disinfectant). For a deep clean, you can also add up to one-half cup of bleach. Run the jets for 15 minutes, and then turn off and drain the bathtub.

Linette Kunen


How do I get rid of black mold in my Jacuzzi tub?

Cleaning The System
For normal cleaning fill your tub to the standard height for operation then for every 75 gallons of water add one gallon of household bleach without additives. Allow the tub to operate for 15 to 20 minutes with the jets wide open and inspect your jets as the process continues.

Walton Janik


Why are my bathtub jets not working?

If the jetted tub will not turn on or the pumps will not start at all, turn off the tub. Make sure the tub is connected to a power supply, that power in the room is not out and that you have completely depressed the "On" button for the jets. If there is no voltage, the pump is not connected to the power supply.

Olivier Salwasser


Can you use bubble bath in a hot tub?

Hot tubs aren't intended to be used as a bathtub, especially when it comes to soap and suds of any kind. This can cause costly damages and a major foam issue. Never add bubble bath, shampoo, detergent or any other soap product. Therefore it is important to not use your hot tub as a bubble bath.

Nadjem Buberl


How big is a Jacuzzi bathtub?

Whirlpool tubs range in size from a standard tub size of about 30 x 60 inches to a luxurious 80 x 60 inches. Obviously, you should measure the area in your bathroom before you buy a jetted tub, but you also need to think about configuration — the way the tub is oriented in the room.

Odd Lagerpusch


How do I turn my bathroom into a spa?

How To Turn Your Bathroom Into A Spa
  1. Use Earthy paint colors.
  2. Install dimmers.
  3. Add faux wood tiles.
  4. Clear toiletry clutter.
  5. Consider a tub.
  6. Install a massage shower head.
  7. Heat your towels.
  8. Add oil diffusers.

Carlina Galfarsoro


How do you frame a whirlpool tub?

How to do it
  1. Build the Frame. Build a frame following manufacturer's directions.
  2. Cut and Attach Backerboard. Cut strips of cement backerboard to fit where needed on top of the framing.
  3. Check for Fit.
  4. Check Drain Trap Position.
  5. Assemble Waste-and-Overflow Unit.
  6. Tighten Nuts.
  7. Mix Mortar.
  8. Set the Tub.