Asked by: Rachyd Bruun
home and garden smart home

Does Home Depot sell garage door springs?

43
Garage Door Springs - Residential Garage Doors, Openers & Accessories - The Home Depot.


Also asked, how much should a garage door spring cost?

Replacing garage door springs costs between $200 and $300 for a professional to complete the job. This includes the cost of the spring, which ranges from $40 to $100 for a torsion spring and $5 to $30 for an extension spring.

Also Know, how do I know what garage door spring to buy? Easy as 1, 2, 3, 4.
  1. Look at the end of the spring to determine the wind direction.
  2. Measure the length, in inches, of ten or twenty coil of the spring that needs to be replaced.
  3. For torsion springs, measure the inside diameter of the 1/16” of an inch.
  4. Measure the overall length of the spring to the nearest quarter inch.

In this manner, does Home Depot sell torsion springs?

Few years ago you could find torsion springs in a hardware store, such as Home Depot, Ace or Lowes, but since they are so dangerous to replace and people were getting hurt when they were replacing them, the hardware stores discontinued to sell them because of the liability to the store for selling an unsafe product.

Are garage door springs dangerous?

Dangers and Risks A garage door with a broken torsion spring can fall rapidly and cause injury or death. However, the most common danger comes when your torsion springs break and you decide to undertake the repair/replace them yourself. Failure to do so may leave you with injuries and/or damage to your property.

Related Question Answers

Fuensanta Cerban

Professional

What causes garage door springs to break?

Rust Buildup
When rust forms on the garage door springs it can cause the springs to easily break and the life cycle of them to be shortened. Rust causes friction on the coil and weakens it as well.

Dilbag Willam

Professional

Should I replace both garage door springs?

Should I replace both springs on my double car garage door? We normally recommend replacing both torsion springs because they normally wear at the same rate, and they usually break within six months of each other. They wear out like car tires, only you can't tell from looking at them when they are ready to break.

Hidaya Lebowitz

Professional

Can you open a garage door with a broken spring?

A garage door with a broken spring should not be opened or closed using an automatic operator. All though some openers can lift the door, you risk damage to the operator and the door. Bend the opener rail due to the weight of the door pulling on the rail, in less common cases the motor might fall off the ceiling.

Maryanna Tsiulev

Explainer

Geza Riha

Explainer

Should you tip garage door repairman?

The correct answer: (1) In most cases, you don't have to tip an installation or repair person. Tip only if you feel the service was exceptional or the installer went above and beyond what's normal to ensure your satisfaction.

Sidonia Rahause

Pundit

How often should garage door springs be replaced?

The average garage door spring, if correctly installed, should last about 10,000 cycles of opening and closing. If you only go in and out of your garage once a day, that means you should expect a broken garage door spring around 14 years after the spring is first installed.

Joshue Deryujinsky

Pundit

How much does it cost to replace a torsion spring?

Torsion Spring and Bar Replacement Cost
Torsion spring replacement costs anywhere from $75 to $150 per spring, including both materials and labor. The springs alone run $30 to $100 each. You'll almost always have two springs per door, and you should replace both at the same time.

Ayelen Geiger

Pundit

Do you need garage door springs?

As a rule of thumb, a single garage door takes one torsion spring. A double-wide garage door takes two springs. However, if you have an exceptionally heavy single door, you may need two torsion springs. It is easy to tell whether you have one or two springs.

Chloe Hillgartner

Teacher

What are garage door torsion springs?

Garage Door Torsion Springs are normally centered above the garage door on a one inch shaft. The shaft running through the springs transfers tension from the springs to the cable drums at the end of the shaft. These drums pull on the cables, which pull on the bottom of the door to balance the weight of the garage door.

Nilo Hausladen

Teacher

What are the different types of garage door springs?

There are many different types of garage door springs, which are generally categorized either as extension springs or as torsion springs.
  • Extension springs.
  • Open Looped.
  • Double Looped.
  • Clipped Ends.
  • Torsion Springs.
  • Standard torsion spring.
  • Early set torsion spring.
  • Steel rolling door torsion spring.

Elham Churshukov

Reviewer

How many turns on a 8ft garage door spring?

Anwser: It will still be the same number of turns as your old garage door springs. 7.5 full turns or 30 to 31 quarter turns for a 7ft tall door and 8.1 full turns or 33 to 34 quarter turns on an 8ft tall door.

Tamer Heideck

Reviewer

What size springs do I need for my garage door?

Generally, most residential garage doors are either seven or eight feet tall. Seven-foot doors usually use a 25-inch spring, and eight-foot doors use a 27-inch spring. However, because precision is important, we'll show you how to measure it by hand. First, make sure your garage door is closed.

Renjie Sacadura

Reviewer

What do the colors on garage door springs mean?

Garage Door Extension Spring Color Coding
Those color codes are as follows: Tan: 100 pounds. White: 110 pounds. Green: 120 pounds. Yellow: 130 pounds.

Yaeko Gafanhoto

Reviewer

How many turns on a garage door spring?

Tighten New Springs
A rule of thumb with springs is that four quarter turns equals a full revolution and the spring needs to be tightened a full revolution for every foot of door height (e.g. 7-1/2 foot door = 7 revolutions +2 (30 quarter turns).

Mariuta Moinhos

Supporter

Does Home Depot sell torsion springs?

Torsion Spring - Residential Garage Doors, Openers & Accessories - Doors & Windows - The Home Depot.

Guoliang Maldini

Beginner

What should it cost to replace a garage door spring?

Replacing garage door springs costs between $200 and $300 for a professional to complete the job. This includes the cost of the spring, which ranges from $40 to $100 for a torsion spring and $5 to $30 for an extension spring.

Herminsul Ligorred

Beginner

How heavy is my garage door?

Regardless of the material with which your garage door was made, its thickness, its size (single or double) or if it has windows, it weighs at least 130 pounds (single door), and it can go up to 350 pounds or more (double door with windows). Contemporary doors (all glass, double door) can weigh over 400 pounds.

Chanda Nilza

Beginner

Can I replace garage door spring myself?

So faced with a broken garage door spring, the question is, can you fix it yourself? You absolutely can replace a garage door spring, but the type of springs you have may influence your decision. If you're uncomfortable with any part of the process, simply leave the job to a garage door professional.

Claudemir Cartro

Beginner

What happens if a garage door spring breaks?

When a spring breaks on a garage door an immense amount of energy being displaced. Torsion springs are mounted over the garage door and they have a shaft running through the middle. When they break, the spring unwinds in less than a second and creates a loud noise due to the coils spinning on the shaft.