Asked by: Exuperio Paukstadt
music and audio rhythm and blues

How a guitar slide should fit?

17
Fit. The slide should fit yourfingersnugly enough to keep from falling on your toe when you relaxyourhand at your side, fingers straight down. This will keep yourhandmuscles from having to hold the slide in place onyourfinger, freeing them to play guitar, which after all isthepoint.


In this manner, what is the best material for a guitar slide?

There are three popular types of guitar slidesinthe market today, glass, metal and ceramic. Glass andmetalslides offer distinct feel and tone, glass being smoothandwarm, while metal being rough and bright. Ceramic slidesonthe other hand serve as an intermediary for the two.

One may also ask, what is a guitar slide made of? The two classic slide materials are glassandmetal. Some of the first slides were made fromthetops of wine bottles (hence the term bottleneck guitar)orfrom lengths of pipe (hence the term . . . er . . .metalslide).

Also question is, which finger is best for slide guitar?

If you plan on playing slide only, amiddlefinger would be a good choice. If you chooseyourring finger to wear a slide, you can wearaslide that covers the entire fret board. This will helpyoueasily mute the strings behind the slide, but in thiscase,you will only have two regular fingers left toplaywith.

Can your fingers be too big for guitar?

There are a lot of different places youcanpress down on the “tip” of yourfinger.Eventually you will will develop a musclememory inyour hand, and your fingers will go righttothe correct place without thinking about it. Soyourfingers are not too fat to play guitar.Youcan do it, just keep practicing.

Related Question Answers

Shenghua Willken

Professional

Can you use a slide on any guitar?

Use the right guitar.
The best guitar to use for slidingisone with higher action. This means you need to findaguitar that has more room between the fretboard andthestrings. If you are using an electric guitar(whichtypically has low action), you will have better luckwith aglass slide.

Aldina Prisco

Professional

What is a rock slide called?

While a landslide occurs when loose dirt orsedimentfalls down a slope, a rockslide occurs only whensolidrocks are transported down slope. Fast-flowingrockslides or debris slides behave similarly tosnowavalanches, and are often referred to as rock avalanchesordebris avalanches.

Wangfen Baigulov

Professional

What does rock slide do?

Rock Slide inflicts damage and has a 30% chanceofcausing the target to flinch. In battles featuringmultiplePokémon, Rock Slide will hit adjacentopposingPokémon. Rock Slide will also destroy certainnaturalobjects found in the background of battles.

Abdellatif Bryan

Explainer

What type of slide did Robert Johnson use?

Johnson played his Gibson L-1 using athumbpick and occasionally used a slide. His recordingswerelargely unknown until they were rereleased in1961.

Berenice Arroba

Explainer

Is Open E Tuning bad for a guitar?

Open E tuning is a tuningforguitar: low to high, E-B-E-G♯-B-E. Comparedtostandard tuning, two strings are two semitones higherandone string is one semitone higher. Chris Martin of Coldplayalsouses this tuning live in the song Hurts Like Heaven,butputs a capo on sixth fret.

Quim Rents

Explainer

Who is the best slide guitarist?

Here, we will be exploring some of the most legendaryslideguitar players of all time.
  • George Thorogood. What else can you say about a guy whocreatedone of the meanest and most badass slide riffs of alltime?
  • Mick Taylor.
  • Chris Rea.
  • Ry Cooder.
  • Warren Haynes.
  • Sonny Landreth.
  • Johnny Winter.
  • Rory Gallagher.

Vlademir Pickelhaupt

Pundit

What tuning does Bonnie Raitt use?

Robert Johnson and Bonnie Raitt are twowell-knownslide guitarists who play in open A. Open G (D, G, D, G,B, D, lowto high) has the same relationships between the stringsas open Abut is tuned a whole step (two frets) lower. Thefollowingfigure shows you a typical slide guitar lick tunedto openG.

Nouh Tchekhov

Pundit

Where do you put your fingers on a guitar?

For the first chord progression you will learn,you'llwant to start by learning how to play a C chord onguitar.Put your index finger on your left handon the firstfret of the B string. Place your middlefinger on thesecond fret of the D string, and your ringfinger on thethird fret of the A string.

Augusto Nedden

Pundit

How do you measure finger for guitar slides?

To measure any finger size, use theOPENEND of the wrench. DO NOT use the ring end of the wrench asitcould get stuck on your finger. Find the sizethatslides over the large knuckle snugly like how aringfits.

Shelton Zemter

Teacher

When was the steel guitar invented?

This type of guitar is claimed to havebeeninvented in about 1889 by Joseph Kekuku in Hawaii. Somelapslide guitars, particularly those of Weissenborn andtheirimitators, have two 6-string necks, but electric and resonatorlapsteel guitars are normally singleneckinstruments.

Najwa Tzalykhin

Teacher

What is the most common tuning for slide guitar?

Reference: Standard tuning E-A-D-G-B-E (EricAndDuane's Guitar Beats Everything) Open G: D-G-D-G-B-D(themost common slide tuning, EC's favoriteDobrotuning). Open E: E-B-E-G#-B-E (Duane'sfavoritetuning, Delta Blues, stress for the neck) or open Dwithcapo at 2nd fret.

Sole Serpa

Teacher

Who started slide guitar?

The story goes that in Hawaii around 1887-89 a boycalledJoseph Kekuku was walking down a road or some say an oldrailwaytrack playing his guitar, when he picked up a metalbolt andstarted sliding it on the strings.

Imane Kogen

Teacher

What kind of slide did Muddy Waters use?

muddy waters used a wrench socket foraslide. try sears.

Norddine Charlez

Reviewer

What is the metal bar on a guitar?

Bar: a metal rod attached to thebridgethat varies the string tension by tilting the bridge backandforth. Also called the tremolo bar, whammybar,vibrato bar, and wang bar. Output jack:the insertionpoint for the cord that connects the guitar toan amplifieror other electronic device.

Don Marciano

Reviewer

How does steel guitar work?

Like its grandfather, the Hawaiian steelguitar,the pedal steel is played with a stainlesssteel barthat slides smoothly up and down the strings tochange the pitch.Instead, players wear picks on their thumbs, andindex and middlefingers of the right hand, which pluck the stringsin groups ofthree, called “grips.”

Arianna Irivarren

Reviewer

How many strings does a dobro have?

six strings

Omeima Sanu

Reviewer

How hard do you press the strings on a guitar?

To play most guitar chords, you needtopress down on the strings with the tips ofyourfingers. This allows you to apply maximum pressure andtoget the cleanest sound possible. Press down onguitarstring with tip of finger for maximum pressure and toavoidtouching other strings that shouldn'tbepressed.

Climaco Ibarlucia

Supporter

How do you harden your fingers for guitar?

How to Toughen Up Your Fingertips
  1. Increase your guitar's playability.
  2. Keep your nails trimmed.
  3. Get the right strings.
  4. Learn on a steel string acoustic guitar.
  5. Don't press on the strings so hard.
  6. Don't play with wet fingers.
  7. Refrain from biting, picking, or shaving off yourhard-earnedcalluses.
  8. Soak your fingers in apple cider vinegar.

Qiang Barrocas

Supporter

Does finger size matter for playing guitar?

Yes, having a smaller than average hand sizedoesmake some chord grips tougher. However, if you're hands aremassiveor on the thicker size, then it can be hard toevenplay what I consider to be the two easiest chordsonguitar - E major and A major.

Co-Authored By:

EveryThingWhat Staff Editor

13

13th June, 2020

35

96% of readers found this page helpful.

4.2/5

Click a star to add your vote

Similar Asks
Trending