Asked by: Uwe Testillano
home and garden home appliances

How do I change the temperature on my Kenmore Elite refrigerator?

Last Updated: 25th March, 2021

35
To adjust the temperature of a Kenmore refrigerator, select the fridge temp and freezer temp buttons. Hold these for a few seconds until the display beeps. Press the fridge temp button and go through the available temperatures until you find the 37 degrees Fahrenheit setting.

Click to see full answer.

Subsequently, one may also ask, how do I set the temperature on my Kenmore refrigerator?

How to Adjust the Temperature on a Kenmore Refrigerator

  1. Set the temperature control. Dials range from "cold" at 0 to "colder" at the highest number.
  2. Check the internal temperature by placing a thermometer in the center of the refrigerator. Leave it overnight to get an accurate reading.
  3. Keep food away from the rear of both the refrigeration and freezer compartments.

Additionally, how long does a Kenmore refrigerator take to get cold? The Ideal Temperature Your Kenmore refrigerator compartment should be set to 37 Fahrenheit or 3 Celsius to ensure your perishable food is kept fresh for the maximum possible time. The refrigerator is set to 37 F when it leaves the factory; once plugged in, the motor takes about 24 hours to reach the set temperature.

Also question is, why is my Kenmore Elite refrigerator not cooling?

Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won't have a fan). To do this, unplug the fridge and pull it out. Clean the fan blades and spin the fan by hand to see if it's stuck.

What is the best temperature for a Kenmore Elite refrigerator?

Usually 37degrees F, is the proper temperature for a refrigerator and 0 degrees F, for a freezer.

Related Question Answers

Addaia Herrenbrucker

Professional

How do you reset a Kenmore refrigerator?

How to Troubleshoot Resetting the Display on a Kenmore Elite Refrigerator
  1. Locate the refrigerator breaker in your service panel.
  2. Turn off the refrigerator breaker, or unplug the power cord.
  3. Restore power to the refrigerator to complete the reset.

Abdallah Tison

Explainer

Where is the temperature control on a Kenmore freezer?

On many of the Kenmore freezer models, the electronic digital freezer control will be located on the back wall toward the bottom. The image below shows a digital control located on the front of the evaporator cover on a common model.

Anil Fragoselo

Explainer

What's the temperature inside of a refrigerator?

The ideal temperature range for your fridge is 35 to 38 degrees Fahrenheit. Bacteria growth starts tripling around the 40 degree mark and things freeze at 32, so we're sticking with 35 to 38 as a goal.

Senia Rojahn

Explainer

What number should the freezer be on?

The ideal freezer temperature is 0 degrees F (-18 Celsius) for storing food and -10 degrees F (-23 Celsius) for freezing food. The temperature range is approximately +5 degrees F to -10 degrees F. For every five degrees F above zero, the recommended storage time is cut in half.

Kasha Nezlin

Pundit

What is the coldest setting on a Kenmore refrigerator?

1 is the warmest setting and 7 is the coldest. You should have your freezer set for 4. This equals to 0 degrees. The refrigerator should also be set to 4, which equals about 37 degrees.

Abdelkader Baikovsky

Pundit

How do I adjust the temperature on my freezer?

Recommended control settings are 0°F for the freezer and 37°F for the fresh food compartment. To view or adjust the current temperature settings, press the Freezer or Fridge pads or "Warmer" or "Colder" pads (depending on model) until the desired temperature setting is displayed.

Pathe Carres

Pundit

How can I make my fridge dial colder?

If the dial is numbered 1 to 5 set it on 3, if the dial is numbered 1 to 9, then set at 4. USUALLY the higher the number on the temp control dial, the colder the temperature your refrigerator will get. If your drinks and food are not as cold as you like, set the temperature dial up one number higher.

Yusein Quenter

Pundit

What is the best setting for an upright freezer?

Kitchen Fact: The ideal temperature range for your freezer is 0° Fahrenheit or below (-18° Celsius or below). Food stored at 0° Fahrenheit or below is safe to eat indefinitely (although quality and taste may be compromised after a while).

Magdalen Grabow

Teacher

Is 1 or 7 the coldest setting on a fridge?

If you set up the door to open from the left side, 1 is coldest. If you want to make it open the other way, 7 is coldest.

Saludina Svetoslavova

Teacher

How do you reset the temperature on a Frigidaire refrigerator?

Touch to display filter condition status. Press and hold for three seconds to reset. hold for three seconds to reset. display on-off When active, it allows the display of the freezer and fridge temps.

Lelia Yukhanaev

Teacher

Is 1 or 5 colder on a fridge?

The higher the number goes the colder the fridge will maintain. Setting it to 5 will make your fridge the coldest. With this out of the way, it should be noted that a lower fridge temperature does not equal better food storage.

Vladislao Allsop

Reviewer

Where is temperature control in GE refrigerator?

Refrigerator Adjusting Temperature Controls. At initial startup both fresh food and freezer controls should be set at the normal setting or mid point settings. Temperature controls can be found in the back of the fresh food compartment, near the top of the fresh food compartment, or on the dispenser panel.

Yuhong Rothenbucher

Beginner

How long do Kenmore fridges last?

However, I got a Kenmore for my parents and died within 12.5 months. Fridges used to have an average lifespan of 25 years, and most had a warranty of 10 years. They now have an average lifespan of 7-10 years, and the warranties have been reduced to 1 year.

Abderrafia Agapiev

Beginner

What are the signs of a bad refrigerator compressor?

The Telltale Compressor Noise
Your compressor kicking on and off is what you hear (or don't hear) at various points during the day – you hear a faint humming noise coming from the fridge, and you know that it's running.

Oleguer Unibaso

Beginner

How do I reset my Kenmore Elite refrigerator?

How to Troubleshoot Resetting the Display on a Kenmore Elite Refrigerator
  1. Locate the refrigerator breaker in your service panel.
  2. Turn off the refrigerator breaker, or unplug the power cord.
  3. Restore power to the refrigerator to complete the reset.

Stormy Zangrilli

Beginner

What happens when the compressor goes out in a refrigerator?

One of the signs that a compressor is failing is that it runs continuously without the refrigerator and freezer compartments reaching their proper operating temperatures. This condition may be the result of a loss of refrigerant in the system, or the compressor's valves may be failing.

Medou Prateek

Beginner

How long does it take a Kenmore refrigerator to get cold?

The refrigerator is set to 37 F when it leaves the factory; once plugged in, the motor takes about 24 hours to reach the set temperature. The freezer should be at 0 Fahrenheit or -18 C.

Sorangel Ateguren

Beginner

Is there a reset button on Kenmore refrigerator?

There is no reset button for the compressor but a model number would be helpful giving you a more specific answer. One thing you might listen for is a click or a hum as the compressor tries to start/run. Often the problem is with the start relay and overload and not the compressor itself.