Asked by: Alaide Pfefferle
music and audio inspirational music

How do I find the model of my Moen kitchen faucet?

Last Updated: 23rd June, 2020

42
The model/series number is usually a four or five digit number beginning with "7" or "8" and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.

Click to see full answer.

Thereof, where do I find the model number on my kitchen faucet?

The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by "P/N."

Subsequently, question is, how do I replace my Moen parts? Replacement parts may be obtained by calling 1-800-BUY-MOEN (Canada 1-800-465-6130), or by writing to Moen Incorporated, 25300 Al Moen Drive, North OImsted, OH 44070-8022. Proof of purchase (original sales receipt) from the original consumer purchaser must accompany all warranty claims.

Subsequently, one may also ask, how do I identify my Moen shower valve?

How to Identify an Old Moen Shower Valve

  1. Look closely at the handle buttons that were attached to the shower valve. Typically, "Moen" will be written in the middle of the "Hot" and "Cold" buttons.
  2. Look closely at the wall escutcheon.
  3. Remove the wall escutcheon and any handle buttons to view the valve body of the shower valve.

Is Moen a good brand?

Moen kitchen faucets are one of the best large-scale manufacturers of kitchen faucets in the market today. They have always been on the cutting-edge of innovation and their reputation is excellent. With Moen, you have an excellent opportunity to find the perfect kitchen faucet.

Related Question Answers

Pascualina Mclain

Professional

How do you remove a Moen kitchen faucet handle?

Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32" hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.

Sukhbir Lines

Explainer

Why is my Moen kitchen faucet leaking?

There are generally two causes of water leaking from your Moen faucet. Because pull-out spray faucets have a single handle, the most common cause of the water leaking is the O-ring. Remove the handle by pulling straight up and exposing the cartridge body and O-ring. Remove the O-ring and replace it with a new one.

Cherrie Lindmeyr

Pundit

Hibai Ortu

Pundit

How do I identify a faucet stem?

  1. It is easiest for us to identify your stem or handle needs by measuring your stem from the left where the washer is attached to the right where the handle fits on the knurled end (The Broached end).
  2. Broached ends are unique by manufacturer and is critical when identifying your stem or cartridge.

Celesti Marrubi

Pundit

Do all faucets have cartridges?

The first three (ball, disc, and cartridge) are all types of "washerless faucets" since they do not use rubber or neoprene washers. The latter (compression) is very much like your basic washer faucet. Take a look at each type and gain an overview of how they work and how they're different.

Myesha Bordonada

Pundit

What is a faucet broach?

The broach is atop the faucet stem, resembling a shape of a small-toothed gear. The purpose of the gear's splines is to fit inside the female end of a faucet handle to control the opening and closing of faucet valve.

Xuping Peter

Teacher

How do I identify my Delta Faucet?

The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet.

Lhou Larrocha

Teacher

How do I identify my american standard faucet?

Where can I find the model number of my faucet? American Standard does not mark the model number on the faucet. Please check on your installation instructions, receipt from place of purchases or you can identify the product on our web site.

Kaira Usellini

Teacher

How do I know what brand my shower faucet is?

Look at the center of the trim plate behind the shower handle to find a brand name or manufacturer symbol. If you see a "K," the faucet is a Kohler unit; an "M" signifies Moen. American Standard, Delta and Price Pfister typically print their entire name on the faucet.

Xiuyun Pyzewsk

Reviewer

What faucet has a red and blue circle?

Delta Faucet RP73192 Classic, Red/Blue Button - Faucet Handles - Amazon.com.

Sibila Zuricaray

Reviewer

How do you fix a Washerless faucet?

Ball-Valve Faucets
  1. Turn off the shutoff valves under the sink and open the faucet to release water pressure.
  2. Remove the handle.
  3. Tighten the retaining ring just under the handle by grasping the squared-off section with adjustable pliers.
  4. Turn the water off again and unscrew the retaining ring, if the leak didn't stop.

Pol Verwied

Reviewer

Where is the Moen model number located?

The model/series number is usually a four or five digit number beginning with "7" or "8" and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.

Doua Hedtmann

Reviewer

What is a Moen Posi Temp valve?

A PosiTemp faucet is a temperature-sensitive shower faucet manufactured exclusively by Moen. But because of its temperature-sensitive design, a Moen PosiTemp valve prevents children and adults from getting scalded or hit by an unexpected blast of icy-cold water while taking a shower.

Lobna Feivus

Supporter

Are all Moen shower valves the same?

For many years Moen tub/shower valves have been manufactured using one of three valves. These valves are Standard, Posi-Temp and Moentrol. Although the look is similar, the trim is not necessarily interchangeable. If this is the way your Moen valve operates, any Posi-Temp trim will fit.

Mayssae Urciuoli

Supporter

Where is the model number on a Moen shower faucet?

The model/series number is usually a four or five digit number beginning with "7" or "8" and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.

Emerito El Younoussi

Supporter

How do you remove a Moen faucet handle without screws?

Use an Allen wrench or small screwdriver to remove the screw, then carefully use your hand or pliers to remove the handle of the faucet. The overall trick is how to remove tap handle without screw and find a good place to begin taking apart the faucet handle so you can get to where you need to be.

Abderahman Jendral

Beginner

How does a Moen shower valve work?

Moen Pressure-Balanced Shower Valve Repair
As with any faucet brand, a Moen shower valve contains working parts that can go bad over time. Moen pressure-balance shower valves are designed so they sense hot and cold water pressure and keep them in balance, preventing the shower from sudden surges of hot or cold water.

Denice Sisniega

Beginner

Where do I find my faucet model number?

The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by "P/N."

Clementa Peteiro

Beginner

Where is Moen located?

Moen is a product line of faucets and other fixtures started by inventor Alfred M. Moen that is now part of the Fortune Brands Home & Security company. The Moen subsidiary is headquartered in North Olmsted, Ohio. Moen was originally part of Ravenna Metal Products of Seattle, Washington.