Asked by: Baralides Hanna
travel rail travel

How do I reset my Kwikset premis?

Last Updated: 27th April, 2021

21
Perform a factory reset. You may reset the lock by pressing the Premis Button “A” on the back panel for 20 seconds. This method will bring the lock to factory default condition but not trigger the handing process.

Click to see full answer.

Regarding this, how do you reset a Kwikset Powerbolt?

Perform a factory reset

  1. Make sure the door is open and unlocked.
  2. Enter the default Mastercode (O-O-O-0).
  3. Press the lock button.
  4. Press 0.
  5. Press the lock button.
  6. Test the lock: With the door open and unlocked, Press the lock button.

Likewise, how do you reprogram a Kwikset lock? Press the PROGRAM button once, enter your new 4 - 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once. If your old code still remains in the unit, you will need to perform a hard reset of the unit.

One may also ask, how do I factory reset my Kwikset SmartCode 909?

Perform a factory reset

  1. Remove battery pack.
  2. Press and HOLD the Program button while reinserting the battery pack.
  3. Press the Program button once more.
  4. Perform the door handing process again to teach the lock the orientation of the door.

How do I reset a Kwikset 910 lock?

How to perform a factory reset:

  1. Remove the batteries.
  2. Press and hold the lock button on the keypad.
  3. Place the batteries back in (while still holding the button)
  4. The lock will beep three times over the course of 15 seconds or so. After the 3rd beep release the button.

Related Question Answers

Llibertat Azad

Explainer

What is the master code for Kwikset?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own.

Zoriana Cabalgante

Pundit

How do you program a Kwikset SmartCode 909?

(1) Hold LOCK button on keypad while (2) inserting the battery pack into the interior. The lock will automatically sense the handing of the door and will extend & retract deadbolt latch. Two beeps will sound in approximately 30 seconds to confirm successful installation.

Shoukat Feuerlein

Pundit

How do you reset a smart door lock?

To reset your Smart Lock via the settings, tap on the desired Smart Lock in the Nuki app and enter the lock settings. Choose “Manage Smart Lock” and then “Factory reset”.

Dioscorides Finzi

Pundit

How does Kwikset smart key work?

When the user wants to rekey the lock, the working key is used to rotate the plug 90° clockwise. A special tool known as the "Smart Key" is used on the small hole to the left of the keyway. This physically disengages the sidebar and wafers from the guide pins and allows the working key to be removed.

Octaviano Chakir

Teacher

How do you enter a Kwikset lock code?

Press the "Program" button on the interior keypad. Enter a four- to eight-digit code on the outside keypad. Press the "Lock" button in the center of the outside keypad. This programs a code for the first user.

Sunday Sei├ža

Teacher

How do I program my Kwikset SmartCode 913?

How do I program my SmartCode 913 lock?
  1. Open the door.
  2. Remove battery cover.
  3. Press the program button once.
  4. Enter new user code.
  5. Press lock button.
  6. If programming is successful the keypad will flash green once, and you will hear one beep.

Odessa Quincampoix

Teacher

How do you program a Kwikset 910?

Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset.

Bilaly Kusz

Teacher

Where is the program button on a Kwikset?

While the door is open, press the “Program” keypad button located on the interior side of the door. Enter a four to eight digit security code that you can easily remember on the outside electronic lock keypad. Press the “Lock” keypad button at the center of the SmartCode keypad.

Vonnie Keromnes

Reviewer

How do you install a Kwikset electronic deadbolt?

How to Install and Set Up Kwikset SmartCode Door Locks
  1. Step One: Remove Your Existing Deadbolt. First, you'll need to remove the current deadbolt installed on your door.
  2. Step Two: Install the SmartCode Smart Lock. To begin install the new door latch if you're not using an existing one.
  3. Step Three: Connect It to Your Smarthome Hub.