Asked by: Lorelei Peutler
technology and computing data storage and warehousing

How do I save running config in Packet Tracer?

17
The running configuration is stored in RAM; the startup configuration is stored in NVRAM. To display the current running configuration, enter the show running-config command. Enter the copy running-config startup-config command to save the current running configuration to the startup configuration file in NVRAM.


Similarly, how do I copy a running config from the console?

Connect to the device, either via console cable, Telnet or SSH. 3. Log in > Go to enable mode > issue a “copy running-config tftp”* command > Supply the IP address of the TFTP server > Give the backup file a name. Note: You can also use startup-config to copy the config saved in NVRAM rather than the running-config.

Additionally, how do you save a command in a Cisco switch? To save that configuration, copy it to the startup configuration, which means it is stored in non-volatile RAM (NVRAM), so that the configuration is retained when you turn off the power. The deprecated command is short and single-purposed, not flexible with full options like the newer command.

Similarly one may ask, what is the command copy startup config running config for?

Copy Running-Config Startup-Config (also known as, Copy-Run-Start) – This Saves the current running configuration to the startup configuration in the NVRAM. This cisco command is necessary to save your running configuration so that when the router reloads, it loads the up the right configuration file.

How do I save changes to the startup config file?

The running configuration is stored in RAM; the startup configuration is stored in NVRAM. To display the current running configuration, enter the show running-config command. Enter the copy running-config startup-config command to save the current running configuration to the startup configuration file in NVRAM.

Related Question Answers

Navid Kirchknopf

Professional

How do I save my config file?

Saving a configuration file
  1. Start ArcMap.
  2. If necessary, click the Task Assistant button. on the Task Manager toolbar to display the Task Assistant window.
  3. Click the Designer tab.
  4. Right-click the Designer tab and click Save Config. File.
  5. Navigate to the location in which you want to save the configuration file.
  6. Click Save.

Zoia Aichner

Professional

What is the latest Packet Tracer version?

Cisco Packet Tracer 7.3 has been released mid-december 2019 and is now available for download on Netacad website. Check Packet Tracer 7.3 new features.

Marizol Vasin

Explainer

What are two characteristics of RAM on a Cisco device?

What are two characteristics of RAM on a Cisco device? (Choose two.)
  • RAM provides nonvolatile storage.
  • The configuration that is actively running on the device is stored in RAM.
  • The contents of RAM are lost during a power cycle.
  • RAM is a component in Cisco switches but not in Cisco routers.

Nakor Nahmer

Explainer

How do I turn off DNS lookup?

Type "no ip domain-lookup" at the command prompt and press “Enter.” The command prompt returns and the DNS lookup function is disabled on the router. Type “exit” and press the “Enter” key to exit configuration mode. The command prompt returns to “router>.” You should receive the verification “no ip domain lookup.”

Ayoze Bruzdewicz

Explainer

What is WR command in Cisco?

They essentially achieve the same things by saving the running configuration to the memory so that after a reload it retains the same configuration. The write memory command, often shortened to just "wr" is the official way to do this.

Rod Meneu

Pundit

What does show run command do?

The show running-config command shows the router, switch, or firewall's current configuration. The running-configuration is the config that is in the router's memory. You change this config when you make changes to the router. This command can be abbreviated sh run.

Shuwei Jeffr

Pundit

How do I copy and paste a Cisco switch configuration?

To copy, you can either select Edit > Copy from the text editor's menu, or hold down the CTRL key and simultaneously press the C key. 17. Switch to the HyperTerminal window and issue the configure terminal command at the Router# prompt and select Enter.

Momchil Sicard

Pundit

How do I backup my router settings?

How to backup and restore the settings configured in a router
  1. Log in to the router. By default, User Name is “admin” and Password is “password”.
  2. In the menu, under Maintenance, click Backup settings.
  3. Click the Backup button.
  4. Then select a location on your PC to save the file.

Maamar Gualtieri

Pundit

How do I use tftpd64?

Start Tftpd64 by selecting Start > All > Tftpd64 > Tftpd64. Alternatively, you can double-click the Tftpd64 icon on your desktop. When the Tftpd64 program opens, click on the Settings button. Click on the Global tab and put a check mark only to the TFTP Server option.

Krassimira Alecu

Teacher

How do I load a config file into a Cisco switch?

The easiest method is to copy
  1. Connect to the switch/router that needs the configuration.
  2. Open the config.txt file.
  3. Highlight the entire contents of the config.txt file.
  4. Copy the selected text to the Windows clipboard.
  5. Switch to the HyperTerminal window, and issue the configure terminal command at the Router# prompt.

Cesario Ceñera

Teacher

How do I setup a TFTP server?

Setting up the TFTP Server
  1. First of all, run the SolarWinds TFTP Server utility by going to the Start Menu and searching for TFTP Server.
  2. Once it loads up, click on File and then select Configure.
  3. Now, if you want the server to appear in the Windows System Tray, click the 'Add TFTP Server to Windows System Tray'.

Ajay Burgk

Teacher

How do I copy a Cisco config using putty?

Backup Cisco Configs Using Putty
  1. Launch putty and connect to your Cisco router/switch.
  2. Go to Session and click on Logging, select “Log all session output”
  3. Click on Browse and choose the location and name of the file (I like to place my config file on my desktop – C:Documents and SettingsAdministratorDesktopconfig.txt)

Estelvina Nothaas

Beginner

Why does the switch respond with startup config is not present?

Why does the switch respond with startup-config is not present? The switch responds with "startup-config is not present" because the start up configuration hasn't been saved yet. Why is the login command required? The login command is required because it makes it so the user will be prompted with a login request.

Tiffaney Chevalier

Beginner

Does copy run start?

Copy Running-Config Startup-Config (also known as, Copy-Run-Start) – This Saves the current running configuration to the startup configuration in the NVRAM. This cisco command is necessary to save your running configuration so that when the router reloads, it loads the up the right configuration file.

Lorelei Mahboub

Beginner

Where is the startup config file located?

Location of Configuration Files
The running configuration is stored in RAM. On all platforms except the Class A Flash file system platforms, the startup configuration is stored in nonvolatile random-access memory (NVRAM).

Renna Auslander

Beginner

What is the purpose of command copy start run?

Newbie Cisco networking admins are typically taught the command copy running-config startup-config , or copy run start , to save their configurations to NVRAM (i.e. Flash memory). copy run start generates a new configuration file and overwrites entirely the previous configuration file.

Elenice Cane

Beginner

What are two actions performed by a Cisco switch?

What are two actions performed by a Cisco switch? (Choose two.)
  • building a routing table that is based on the first IP address in the frame header.
  • using the source MAC addresses of frames to build and maintain a MAC address table.
  • forwarding frames with unknown destination IP addresses to the default gateway.

Mariamu Llandera

Beginner

Why would a technician enter the command copy startup config running config?

1. Why would a technician enter the command copy startup-config running- config? To remove all configurations from the switch To save an active configuration to NVRAM To copy an existing configuration into RAM To make a changed configuration the new startup configuration 2.

Co-Authored By:

EveryThingWhat Staff Editor

7

26th March, 2021

4,825

83% of readers found this page helpful.

4.9/5

Click a star to add your vote

Similar Asks
Trending