Asked by: Mircea Cuerva
sports soccer

How do I set up my x1 Remote?

Last Updated: 27th March, 2020

40
Pair Your Remote For Voice Control
  1. Press and hold SETUP until the LED turns GREEN.
  2. Press the Xfinity button.
  3. Follow the on-screen instructions to enter the 3-digit codethat appears.
  4. The remote is now paired and voice commands should workwhen you hold down the VOICE CONTROL key.

Click to see full answer.

Also asked, where is the Setup button on Xfinity Remote?

Pair the XR15 Remote to a TV While the TV is on, press and hold the xfinityand Mute buttons on the remote for five seconds untilthe remote light at the top changes from red to green. Enterthe first five-digit code listed for the TVmanufacturer.

Similarly, how do I program my TV remote? How to Connect a Remote to a TV

  1. Hold down the program button on the remote control for 3seconds. This button mighty be displayed on the remote as"PRG."
  2. Press the "TV" button on the remote control to let the remoteknow it will be syncing with a TV.
  3. Find the proper codes for the TV you are programing.

In respect to this, how do I reset my Xfinity remote control?

To perform a factory reset:

  1. Press the Setup button until the LED at the top of the remotechanges from red to green.
  2. Press 9-8-1.
  3. The LED will blink green twice to indicate that the remote wasreset.

Where is my setup button on my Xfinity Remote?

To Pair an Xfinity Remote (With a SetupButton) Set the TV input to the input connectedto the Xfinity X1 TV Box. Press the Setup button onyour remote until the LED at the top changesfrom red to green.

Related Question Answers

Honesto Lesueur

Professional

How do I pair my Comcast remote without the setup button?

To Pair an Xfinity Remote (Without a SetupButton)
  1. Make sure the remote batteries are installed and your TV and TVBox are powered on.
  2. Set the TV input to the input connected to the Xfinity X1 TVBox.
  3. Press and hold the xfinity and Info buttons for 5 seconds.

Eugeny Zhizhnov

Professional

How do you reset a TV remote control?

Reset Remote Control to Factory Default Settings
  1. Press and hold the TV button.
  2. While holding it pressed, press the OK button for one secondand release both buttons at the same time (all three of the TV, DVDand AUX buttons will flash, the TV button light will stay on).
  3. Press and hold the DELETE button for three seconds (the TVbutton blinks and stays off).

Kory Meixensperger

Explainer

Where is Settings button on Xfinity Remote?

The B button is shaped like a square on yourremote. Additionally, you can navigate to AccessibilitySettings from the main menu. Press the xfinitybutton on your X1 remote control. The button islocated five rows down from the top center of theremote.

Josef Quintric

Explainer

How do I access the TV menu on my Xfinity Remote?

To access the main menu, press thexfinity button on your remote. Then, use the leftarrow button or the right arrow button to browse through themenu. Choose from any of the following and press the OKbutton: Search (magnifying glass icon): Search for live TVshows, On Demand programs and your DVR recordings.

Leocricio Huhu

Explainer

How do I turn off my Xfinity x1 Remote?

Re: Turning OFF X1 Equipment withremote
To turn off the device, you must press the Powerbutton on the front panel, configure the set-top box to gointo Power Save automatically or simply leave the set-topbox on while turning off the TV.

Jerobel Whitaker

Pundit

What does it mean when your Xfinity remote blinks green then red?

Press the Setup button on the remote untilthe LED at the top of the remote changes fromred to green. The LED will blink toindicate the battery level. 4 green blinks indicatethat the battery power is excellent. 3 greenblinks indicate that battery power is good.

Eamon Perlin

Pundit

How do I reset my Xfinity xr11 remote?

Re: XR11 Voice Remote
To perform a factory reset: Press the Setupbutton until the LED at the top of the remote changes fromred to green. Press 9-8-1. The LED will blink green twice toindicate that the remote wasreset.

Hadhoum Raducu

Pundit

How do I get my Xfinity remote to control my TV volume?

Re: Xfinity remote control of TV volume
  1. Press and hold the "Setup" key until a device key blinkstwice.
  2. Type in the code 993. A device key should blink twice.
  3. Press and release the Volume Up (Vol +) button.
  4. A device key will blink FOUR times if successful.

Zaka Zumwald

Pundit

How do I pair my xr15 remote?

Pair the XR15 Remote to a TV
  1. While the TV is on, press and hold the xfinity and Mute buttonson the remote for five seconds until the remote light at the topchanges from red to green.
  2. Enter the first five-digit code listed for the TVmanufacturer.
  3. Aim the remote at the TV, and press the Power button.

Zhor Emond

Teacher

How do I program my black Comcast remote?

How To Program the Little Black Comcast Remote
  1. Before starting, make sure that the little black box is hookedup correctly and you have a picture on your TV.
  2. Start by turning your TV on.
  3. Press and hold the small white button labeled “Set”until the red light flashes twice.
  4. Press the numbers 9-9-1 and you will see the red light flashtwo more times.

Elvio Baumheyer

Teacher

How do I reset my xr15 remote?

For remotes without a Setup button (XR15version of the X1 Voice Remote): Press and hold the A(triangle) and D (diamond) buttons at the same time for threeseconds until the status light changes from red to green. Enter9-8-1 on the remote.

Hady Folligan

Teacher

Who manufactures Onn TV?

ONN TV's are built by Durabrand.

Mabelle Hassenpflug

Teacher

Do I need a modem and a router?

To bring the internet into your home, you're going toneed a modem. Your modem shares this connection witha computer or a router via an Ethernet cable. Modemsaren't one-size-fits-all solutions; the type of modem you'llneed depends on the type of internet service you receive. Ifthat's DSL, you'll need a DSL modem.

Carlo Bosch

Reviewer

Is Xfinity self install easy?

What's Included in an Xfinity InternetSelf-Install Kit. Comcast offers a variety ofoptions to self-install your services. EachSelf-Install Kit comes with everything you need toquickly and easily set up your devices and activate yourservices. Read on to learn more about the Xfinity InternetSelf-Install Kit.

Izarbe Nastri

Reviewer

How do I set up Xfinity WiFi?

Connect to XFINITY WiFi
  1. Click on the windows icon in the taskbar to bring up the windowmenu and click on Settings.
  2. Click on Network & Internet in the Settings menu.
  3. Click on Wi-Fi to see the list of available networks(SSIDs)
  4. Select xfinitywifi from the list of available networks andclick it.

Delpha Muksunov

Reviewer

How long does it take for xfinity to activate?

Once your cable modem is registered either online orthrough a conversation with someone at Comcast, Comcast willprovision your cable modem service. Typically this takes less than5 minutes, but in some cases this may take up to 30 minutesto complete.

Deisy Santiesteban

Reviewer

Do I have to wait for Comcast self install kit?

Self-Install Kit Overview FAQs
  • You can install services on your own.
  • You no longer have to wait at home for a technician.
  • You'll receive your products in one single shipment.
  • You won't need to go to the Comcast Service Center.
  • You'll be able to easily activate your equipment.

Kiersten Roehricht

Supporter

Do I need Comcast self install kit?

You do not need any tools to connect yourdevices. Xfinity Self-Install Kits come with thedevices and connection wiring to set up your Xfinityservices in just a few fast and easy steps! After you've plugged inand powered up your equipment, go to xfinity.com/activate toeasily activate your services.

Auxiliadora Capador

Beginner

What is included in Xfinity self install kit?

Your installation kit includes everything youneed to get started: xFi Wireless Gateway that combines your modemand router into a single convenient unit. Power, coax, and Ethernetcables to connect your gateway. Getting Started Guide and setupinstructions.