Asked by: Magda Olson
style and fashion bath and shower

How do I turn my spa lock off?

Last Updated: 18th May, 2020

To deactivate the SPA LOCK, press the LIGHT minus (-) and TEMP minus (-) buttons at the same time and hold them down until the word SPA and the lock symbol are no longer illuminated on the display (approximately two seconds).

Click to see full answer.

Besides, how do I unlock my hot tub control panel?

Spas using Astrel and Gecko SSPA and MSPA systems

  1. Panel lock: Press the "Pump 1" button for 5 seconds. The screen displays "LocP". Release the key and the keyboard will be partially locked.
  2. Unlocking the panel: Press the Pump 1 button for 5 seconds.

Secondly, how do I reset my hot tub control panel? A blinking red light on the control panel may indicate it needs to be reset. For most models, you will need to turn off the power to the spa for a minute or two and then turn it back on again. Turn on the lower amp breaker first if you have a hot tub powered by 240 volts.

Correspondingly, what is SPA lock?

The spa lock feature is designed to lock the control panel so others can't mess with the lights, jets, and temperature settings. It's a useful feature if you like things a certain way and are the only one using the hot tub on a regular basis.

How do you unlock control panel?

Press and hold for 3 seconds the "Control Lock/Unlock" button on the control panel to unlock the control panel. The "Control Lock" status light is goes out when the control panel is unlocked.

Related Question Answers

Gabriel Bakhrakh

Professional

How do I reset my Hot Springs Spa?

Disconnect the power source from the spa. Wait 30 seconds and reset the heater high limit. The reset button is located in the equipment compartment. Plug the spa back into the power source.

Huimin Duvelshaupt

Professional

How do I reset my hot tub jacuzzi?

Reset “616” Code on 2012-2013 J-300 & LX Collection Models:
  1. Press and hold the Jets pump 1 and Cooler (-) button at the same time for 3 seconds.
  2. Press the Warmer (+) button until the display shows “0”.
  3. If the timer has reached “0”, pressing the Jets pump 1 button will reset the counter.

Khaira Capellades

Explainer

How do you test a hot tub circulation pump?

When your hot tub pump is dead…
Check that your power is on, the breaker or GFCI test button are not tripped, all valves are in the open position. Follow the circ pump plumbing, and look for any kinks in the hose. Pull out the cartridge filter to see if flow improves and the circulation pump is doing better.

Confesora Jelobinsky

Explainer

How do you turn on a Balboa hot tub?

  1. Temp.
  2. The last measured water temperature is constantly displayed.
  3. Press “Jets 1” to turn pump 1 on or off, and to shift between low and high speeds (if equipped).
  4. Press the corresponding button once to turn the device on or off.
  5. Your spa will enter Priming Mode ( ) when it is energized.

Fidelis Pacher

Explainer

How do you unlock the temperature on a hot tub?

Unlock Temperature Control
  1. Press the "Set up" or "Set down" button on your hot tub operating panel.
  2. Push the "Time" button.
  3. Press "Jets 1," then "Set down." A "0" will appear on the screen indicating the temperature control lock is off. The lock symbol will also disappear from the display on the operating panel.

Junyan Lepihov

Pundit

How do you unlock the Catalina Spa panel?

To unlock the panel, press “Time” “Jets 1” then “Cool.” Press “Warm” or “Cool” then “Time,” “Jets 1,” and “Warm” within 3 seconds to activate the lock. The TL indicator light will light when the set temperature is locked. To unlock the set temperature, press “Warm” or “Cool” then “Time,” “Jets 1” and “Cool.”

Neriman Bonachera

Pundit

How do you turn on a hot spring portable spa?

To turn on the spa light, press the LIGHT plus (+) button. The light will turn on at maximum intensity and the light symbol will illuminate on the control panel display. To reduce the intensity of the light, press the LIGHT minus (-) button.

Carriona Altschuler

Pundit

How do you adjust the temperature on a Balboa hot tub?

To change the set temperature, press a temperature button again before the display stops flashing. Each press of “Warm” or “Cool” will adjust the set temperature. After three seconds, the display will stop flashing and begin to display the current spa temperature.

Parmjit Pallavan

Pundit

How do I test my hot tub control panel?

No Display on Topside Control Panel
  1. Reset Spa Controller, power down and restart.
  2. Check for condensation under display glass.
  3. Check cable for crimps or any visible damage.
  4. Clean plug-in cable connections on both ends.
  5. Check power at Transformer on control circuit board.
  6. Check power at fuse on spa control circuit board.

Asunta Mnogogreshny

Teacher

Why does my hot tub have no power?

Faulty Wiring
This will often cause a breaker to trip or a fuse to blow, but not always. If it's the wires carrying power into or out of the transformer, you can have a no power situation. Shut off all power before touching or replacing any damaged spa wiring.

Cuie Storey

Teacher

Why has my hot tub stopped working?

A common problem is powering a hot tub back up after a cleaning. Often, during the cleaning process, the GFCI will trip and shut the hot tub off. To begin troubleshooting, start with the heater since it's the most common cause of a GFCI tripping. To do this, unplug the heater.

Muskilda Rottwinkel

Reviewer

How do I know if my hot tub pump is bad?

There are several signs of hot tub pump failure:
  1. Humming noise from motor not turning, frozen shaft, bearings or impeller, or defective starting capacitor.
  2. Whining noise from worn bearings.
  3. Leaks under the pump from a failure of the pump seals.

Marzok Bousquet

Reviewer

How long do hot tubs last?

A hot tub can last anywhere from 5-20 years or more. Cheaper hot tubs made with lower quality materials won't last long. If those hot tubs are not well maintained, they may not last more than 5 years.

Amedeo Chepel

Reviewer

Do hot tubs turn on automatically?

Re: Spa Turns Itself On
- means that they can do in ten minutes what other spas can take an hour or more to do. And since the tub sits with a good-fitting cover on it when not in use, it doesn't really need to have other filter cycles.