Asked by: Kenny Middell
automotive microcar

How do you cut plexiglass without chipping?

Last Updated: 22nd June, 2020

16
How to Cut Plexiglass by Hand
  1. Place the Plexiglas on a flat work surface.
  2. Mark the Plexiglas with a grease pencil where you want to cut it.
  3. Along the lines you marked, carefully score the Plexiglas five to 10 times with a glass cutter.
  4. Move the scored section to the edge of the work surface.

Click to see full answer.

Keeping this in view, does Home Depot cut plexiglass?

Home Depot does not offer plexiglass cutting. If you inquire very politely and on a slow day/time (7–9am is recommended) you may find someone in Millworks/Tool Rental/Building Materials able to assist. Home Depot does not offer plexiglass cutting.

Beside above, does Lowes cut plexiglass to size? If you need plexiglass, don't visit Home Depot or Lowes, call a "Professional". We will cut-to-size & ship sheets of plexiglass directly to your door. The SHEETS - BASIC SIZES (Calculator Tab 3) has a Nominal Cut Tolerance (W x L) of Plus or MINUS . For precision cutting, use the Cut-To-Size Calculator (Tab 1).

Correspondingly, is there a difference between acrylic and plexiglass?

Acrylic is a parent name that indicates the type of polymer used in its manufacturing. Plexiglas is a trade or brand name. It's more often called Plexiglass. Plexiglass is a common term used for cell cast acrylic (as is Lucite and Arcylite).

What kind of drill bit do you use on plexiglass?

Diamond Dusted Drill Bits This dust enables the bit's cutting edge to remain sharp. The bits come with a 60 degree points and 0 degree rake. Diamond dusted bits are good for stack drilling or drilling multiple layers of plexiglass or plastic materials.

Related Question Answers

Crispo Santamarta

Explainer

Can you cut plexiglass with a jigsaw?

If you have a jigsaw, you can cut Plexiglas. One trick to help prevent splintering is to stick painter's tape over the cut line. Also, don't forget the blade: Find an uncoated (that is, unpainted) fine-toothed sheet metal jigsaw blade (such as DeWalt's 32 TPI).

Catiana Astle

Explainer

Will a glass cutter work on plexiglass?

Don safety goggles and gloves for protection; cutting plexiglass can result in splinters or shards that can pose a hazard. Clamp the plexiglass sheet to the work surface for stability. Use a glass cutter or the dull side of a utility knife to score the plexiglass along the mark line 5 to 10 times.

Zhiming Mentaberri

Pundit

Can you cut plexiglass with a Dremel?

Things You'll Need
From metals and wood to fiberglass and plexiglass, Dremel rotary tools can handle the job quickly and efficiently. Dremel rotary tools cut material at very high cutting speeds (from 10,000 to 35,000 RPMs) so the cuts are high quality and are considered a fine finish.

Indhara Ortiz De Zarate

Pundit

How much does plexiglass cost?

It's very solid, was easy to cut and drill through, and is crystal clear which is nice! Polycarbonate Plastic Sheet 12" X 24" X 0.0625" (1/16") 3 Pack Shatter Resistant, Easier to Cut, Bend, Mold than Plexiglass.

Top Selected Products and Reviews.
List Price: $49.99
Price: $34.99
You Save: $15.00 (30%)

Zanib Klaass

Pundit

Is plexiglass easy to cut?

How to Cut Plexiglass by Hand. Plexiglas is a brand name of acrylic plastic sheets, which are made of very rigid plastic and are often substituted for glass. It's clear like glass, but doesn't break as easily as glass. However, Plexiglas does scratch easily, so it has to be handled and cut with care.

Auixa Heisterklaus

Pundit

Can I cut plexiglass with a circular saw?

For thicker sheets of plexiglass, cut with a power saw—be it a circular saw, saber saw, or table saw. (To cut anything but a straight line, opt for a jigsaw.) There are special blades designed expressly for acrylic, but any metal-cutting blade with carbide tips can do the trick.

Adriaan Valyavski

Teacher

How do you drill through plexiglass?

First, place the plexiglass on a thick piece of scrap wood you won't mind drilling into. Next, mark the location of the hole with either a grease pencil or permanent marker. Then place a piece of masking tape over the mark. This will prevent chipping when you begin to drill into the plexiglass.

Ulf Hauchecorne

Teacher

Can you cut plexiglass with a hacksaw?

There are a variety of ways to cut plexiglass, and one of the least expensive methods is to use a hacksaw, especially if you only have a few pieces of plexiglass to cut. Plexiglass can easily be cut to size.

Azahra Jahnige

Teacher

How do you cut thin plexiglass sheets?

Cutting with a scoring knife:
  1. Mark the area of sheet you want to cut.
  2. Use scoring knife to cut a narrow groove in the acrylic sheeting.
  3. Scoring preferably works on sheets less than ¼” (6.35mm) in thickness.
  4. Place the sheet over hard edge with groove-side up.
  5. Clamp the sheet if needed.

Kadija Daryapurkar

Teacher

How do you cut a plexiglass circle by hand?

Use a saber saw or jigsaw with a fine-toothed blade for larger circles. Mark or scribe the circle and drill a 1/4-inch pilot hole slightly inside the perimeter. Put the blade through the hole to start the cut, then saw around the circumference.

Marbella Batge

Reviewer

Can you use a table saw to cut plexiglass?

Yes a table saw can be used to cut plexiglass and other acrylic materials to size, But you you need to make sure that you are using a blade that's designed to cut plastic and you employ a proper technique. It tends to melt under friction and the heat generated by a power saw is bound to melt plexiglass.

Benicia Eikhengolts

Reviewer

What saw blade cuts plastic?

Best Circular Saw Blades for Cutting Plastic
  • Diablo D1080N Plastic Cutting Saw Blade. The Diablo is a pioneering company in the manufacture of circular blades, the Diablo D1080N has been designed for cutting non-ferrous metals and plastic materials especially the acrylic.
  • IRWIN Tools MARATHON Carbide Blade, 12-Inch, 80T (14083)
  • Concord ACB0725T080HP blade.

Mia Zancanaro

Supporter

Can you cut Lexan with a jigsaw?

When you need to cut Lexan, you can essentially treat it as a sheet of plywood and cut it with any power saw you would use for that material. Make straight cuts with a circular saw or table saw, and curved ones with a band saw or jigsaw. You should use carbide-tipped blades with closely spaced teeth.

Yanqing Abakeliya

Supporter

How do you cut plastic smoothly?

To cut thick plastic, you'll need a fine-toothed saw, jigsaw, or table saw, since plastic can be tough to cut through. Start by clamping it to a workbench or holding it firmly so it doesn't move. Then, use a fine-toothed saw to make the cut. Use the full length of the blade and move the saw in quick, smooth motions.

Quintino Vartolomei

Supporter

What is plexiglass made of?

Plexiglas is a plastic material made from polymers of methyl methacrylate, an ester of methacrylic acid.

Glennie Aodh

Beginner

Can you cut plastic with a circular saw?

Cutting Thick Sheets of Plastic
To make straight cuts on thicker sheets of acrylic and polycarbonate plastic (greater than ? inch thick), you'll need to use a table saw or circular saw. Use the circular saw (or table saw) to cut through the plastic in the same way you'd cut through wood.

Corono Tornedde

Beginner

Why is plexiglass so expensive?

Why Plexiglass is Expensive
In most cases, the process of manufacturing acrylic plastics is the reason for the high cost of Plexiglas sheets. Making the synthetic material involves either the cell cast or the extrusion method.

Maximilian Taksa

Beginner

What kind of saw blade do you use to cut plexiglass?

For best results with Plexiglas® MC acrylic sheet, circular saw blades should be the largest diameter possible and contain 60 carbide-tipped teeth with a triple-chip-tooth design. Teeth should be shaped with a 5° to 10° positive rake angle and have sharp cutting edges with adequate clearance.

Ayleen Bronze

Beginner

What is more expensive plexiglass or glass?

Standard glass is cheaper than clear acrylic sheets. However, given that plexiglass is more resistant to weathering and erosion than glass, long-term maintenance and replacement costs can become significantly cheaper with plexiglass.