Asked by: Kerstin Noya
hobbies and interests woodworking

How do you remove the guard from a circular saw?

Last Updated: 21st June, 2021

18
1. Remove the saw blade
  1. Remove the nut that secures the blade to the saw.
  2. Now you can remove the saw blade.
  3. You should also remove the flange that rests between the saw blade and saw body.
  4. Use a flat-head screwdriver to pry up the guard retaining ring.
  5. Now you can mount the guard onto the saw.

Click to see full answer.

Likewise, why does my circular saw get stuck?

If your hand is asserting a sideways pressure that will cause binding and the saw will stop. Even a slight sideways pressure combined with dirty/dull blade will cause stoppage. When I first starting using my circular saw, 80% of the time I forgot to adjust the depth of cut, making it work harder than it needed to.

Also, why is my circular saw not cutting straight? If you are struggling with the circular saw to cut straight line on the wood, at first, look at your workpiece. So, if you find out that your saw is okay and the problem is with your unstable wooden piece, just have a set of hold down clamp. It will lay hold on the workpiece with the table to make it stable.

Similarly, it is asked, what are the parts of a circular saw?

Circular Saws 101: A Beginner's Guide

  • 4.1 Bevel Adjustment.
  • 4.2 Plate.
  • 4.3 Blade Cover.
  • 4.4 Bolt Clamp.
  • 4.5 Blade.
  • 4.6 Cord.
  • 4.7 Handle.
  • 4.8 Power Switch and Trigger.

Why does my circular saw burn the wood?

A Dull or Dirty Saw Blade Might Be the Culprit Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty. If wood pitch resins build up behind the teeth of the blade, the cutting speed will slow down, increasing the chances for burns.

Related Question Answers

Nerina Gomatos

Pundit

Which side should the blade be on a circular saw?

The blade is to the right, with no hands or arms crossing over. The base sits over your workpiece on the left, and when making small cuts, the cut-off falls to the right. With a left-handed saw, a righty's left hand will cross the blade when gripping the auxiliary handle. That's less than ideal.

Naha Pitatelev

Pundit

How do you use a circular saw without a table?

How to Use A Circular Saw Without A Table
  1. Step 1: To start off, you should get a pressure treated plywood or some sort of wood which has a high moisture content.
  2. Step 2: Fit your saw with the edge guide.
  3. Step 3: Next, you've to set the depth of the blade accurately.
  4. Step 4: After that, place the unused pieces of wood on the sawhorses.

Eimi Syre

Pundit

Can a circular saw cut a 4x4?

Most circular saws sport a 7 ¼” blade which has a cutting depth of up to just over 2 ½” at 90 degrees and usually less when cutting bezels. The smaller 6 ½” blade cuts to a max depth of 2 1/8″. This means that the two most common blades are not large enough to go through a 4×4 in a single pass.

Mallie Barrabino

Pundit

When should I replace my circular saw blade?

Ways to tell its dull:
  1. it starts binding.
  2. it tears/chips the substance more than usual.
  3. it burns the wood.
  4. just a pain to use = a sharp blade should let you push the saw forward with minimum effort. If you find yourself forcing the saw forward (not ideal from a safety perspective), change the blade.

Escarlata Southwick

Pundit

What does a brake do on a circular saw?

A: An electric brake should stop a mitersaw blade within two to three seconds, Miguel. The brake works by reversing the flow of electricity in the motor when you release the trigger.

Ovidiu Arona

Teacher

Where do you cut with a circular saw?

Circular saws usually splinter the wood that's facing up and cut cleanly on the side that's facing down. So when you're cutting veneered plywood, always position the material “good side down” so the teeth of the blade are pushing the veneer up against the core rather than ripping it away.

King Venjakob

Teacher

Why does a circular saw kickback?

Kickback is a fact of life for anybody who uses a circular saw often. It is caused by the timber that is being cut, bending in some way, so that it jams on the back of the blade, making the saw buck or stall.

Houssien Razola

Teacher

How do you cut straight with a circular saw?

Slide the saw's shoe against the circular saw rip guide to rip the plywood. To ensure a straight cut, press the saw firmly against the straightedge as you push it along. Clamp a perfectly straight board or metal straightedge to a sheet of plywood to make cabinet-quality straight cuts.

Lionel Erduino

Reviewer

Does Walmart sell circular saws?

Circular Saws - Walmart.com.

Laurea Rives

Reviewer

Can you cut laminate flooring with a circular saw?

Most DIYers can install an entire room with laminate flooring in one day. Planks can be cut with a hand saw or circular saw, and most laminate flooring comes in planks that simply snap together with a tongue-and-groove system. Some laminate flooring options comes with an underlayment already attached.

Dasio Renda

Reviewer

Are circular saw blades Universal?

Circular saw blades are designed for use with miter saws, table saws, radial arm saws, cut-off saws and standard circular saws. Many circular blades can be used interchangeably between devices. This guide will help you use the correct blade for each job.

Dilawar Kwilecki

Supporter

How do I change the blade on a circular saw?

2 Press down on the saw's arbor-lock button and rotate the blade until the locking mechanism engages. 3 Use the blade wrench to remove the arbor nut holding the blade in place. To loosen the nut, turn the wrench in the same direction as the blade cuts. 4 Retract the saw's upper blade guard and remove the old blade.