Asked by: Luar Narbaiza
automotive auto safety technologies

How do you reset an airbag light?

How to Reset an Airbag Light
  1. Put the key into the ignition and turn the switch to the "on" position.
  2. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
  3. Repeat Steps 1 and 2 two more times.

Consequently, what can cause the airbag light to come on?

A common reason air bag lights come on is because something is interfering with the seat belt switch — the sensor that detects if the belt is properly fastened — which could trigger a false warning light related to the air bags, says Robert Foster, owner of Foster's Master Tech in Bozeman, Montana.

Also, how much does it cost to reset the airbag light? Number 1 -- Reset Airbag Light This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.

Additionally, can you reset airbag light without tool?

You should always check the airbag codes with a scanner and repair the problem before trying to reset the light. It's possible to reset it without a scanner, but you do not really want to reset an airbag light when the problem still occurs, because you can make the airbags to deploy.

Can you reset airbag light with obd2?

#2. OBD2 scanner can read fault car code and reset SRS. However, you need to buy an OBD2 scanner that is capable of reading SRS light codes and resetting it. There are many OBD2 scanners on the market. They work with 1996 and newer models and can solve not just SRS issues but other basic and advanced problems as well.

Related Question Answers

Carma Mijangos


Can low battery cause airbag light?

It could happen when your car battery is low or has been drained for some reasons. The problem will be gone once the battery is fully recharged. Low car battery could trigger the airbag light to turn on.

Matrikas Biryuzov


Is it safe to drive a car with the airbag light on?

It is not safe to drive with the airbag light ON. When there is a problem with the system, it will not deploy the airbags at all in an accident. It is always recommended to repair the problem as soon as possible. If your airbags are not functional in a crash, it may cause death or serious injuries.

Hai Zingraf


Where are airbag sensors located?

Airbag sensors usually are located at the front of most of today's American made automobiles. They are placed purposefully in the known impact zones of a vehicle. This way when a crash occurs, the sensors can signal the airbag to deploy nearly instantaneously.

Mohamed Hailov


Alecu Barrasa


How much does it cost to replace an airbag sensor?

The average cost for an air bag crash sensor replacement is between $428 and $445. Labor costs are estimated between $62 and $79 while parts are priced at $366. Estimate does not include taxes and fees.

Yeniffer Vanelli


Will removing fuse disable airbag?

The NHTSA says that you can't remove or disable the airbags on any registered, road-driven vehicle newer than 1996 without a waiver. Simply pulling the airbag fuse may not disable the airbags. Many ACMs utilize an internal battery to ensure deployment even if the power is cut.

Mieczyslaw Bartomeu


Can BlueDriver reset airbag light?

If you need to get yourself a scanner, I would seriously consider the BlueDriver® because not only can you read and clear the typical check engine light codes, you can also read and clear airbag, transmission, ABS, and other module codes (for Ford, GM, and Chrysler vehicles).

Alexi Domenzain


Will disconnecting battery reset abs light?

Do this by disconnecting the positive battery cable on your car and holding down on the brake pedal until the car's electrical system has been drained. With no stored electricity, the car's computer will be reset and the indicator light will go off. If the light stays off, it has been reset.

Aurangzeb Schlader


Why does my airbag light came on and off?

Every time you turn on the car, the computer in the vehicle checks the system. The light comes on for a few seconds and then goes off to show that it's working. If it remains on, then there's a problem with the system, and the airbag may not deploy in an accident. You'll need to reset the airbag light in this case.

Eniko Paunescu


How do you reset ABS and brake light?

How to Reset an Anti-Lock Brake Light
  1. Disconnect the positive cable from the car battery, and then hold down on the brake pedal to drain the car's electrical system. This will reset the car's central computer.
  2. Change the ABS sensor if the light comes back on.

Presentina Vaish


Will car pass inspection with airbag light on in NC?

air bags are not part of the NC inspection, neither is ABS or traction/stability. Your dash can be lit up like a christmas tree and as long as the check engine light is off and your readiness monitors are good then you will pass.

Michele Oertel


How do you reset the airbag light on a Toyota?

How to Reset the Airbag Light on a Toyota
  1. Find the fuse panel cover under the steering column and open it with your fingers. Pull down on it from the top.
  2. Look for a yellow electrical connector. This is the SRS power connector.
  3. Take a paperclip and unfold it.
  4. Put the yellow electrical connector back in place and close the panel cover.

Orkatz Eykers


How do I reset my car?

How to Reset a Car Computer
  1. Open up the hood.
  2. Remove the positive terminal cable from the battery using your pliers or wrench.
  3. Go to your fuse box in your car, and look at the diagram. Select the fuse that is labeled "ECM" and remove this fuse.
  4. Keep the car disconnected like this for two to three minutes to clear the computer's memory.

Jong Winklmeier


Are airbag repairs free?

Once your vehicle is included in a recall because of a defective airbag, you can take it to a dealership and have it fixed for free. Even if your vehicle's warranty has expired, your defective airbag replacement is free.

Leontina Staedler


Can you replace airbags yourself?

Airbags replacement can cost much more than just the airbag itself. Airbag module replacement will run another $600 and up. So, if you've been in a front collision and your driver's and passenger's front airbags have deployed, you can expect your airbag system alone to cost around $3,000 to repair.

Fidelina Arencibia


How do I permanently turn off my check engine light?

Then put your key into the ignition and turn it three times to the “ON” position. This will clear the emissions data from the vehicle memory as well as the readiness flag data. Reconnect the positive battery cable and turn the key in the vehicle ignition. Wait one minute and the check engine light error should be gone.

Debrah Felkerzam


What are SRS codes?

05 Jun SRS Warning Light! The SRS warning light refers to the Supplemental Restraint System (SRS) and is most commonly known as the airbag system light. This is a computer controlled system designed to deploy one or more driver, passenger, and side airbags.

Geneva Ergüin


Does torque pro reset airbag light?

Torque Pro (OBD 2 & Car)
Doesn't reset Airbag light or diagnosed it.

Mirjam Opgenort


How do I get rid of dash warning lights?

How to Reset the Warning Lights on the Dash
  1. Open the hood of your vehicle.
  2. Loosen the nut that holds the negative terminal to the battery with the pliers.
  3. Completely remove the cable from the negative battery terminal.
  4. Leave the battery disconnected for 10 minutes to ensure that the computer is fully reset.