Asked by: Vernetta EguidaƧu
hobbies and interests beadwork

How do you tie stretchy bracelets?

Last Updated: 27th February, 2020

21
To make a long-lasting elastic bracelet, follow these othertips:
  1. Stretch your cord before stringing any beads.
  2. Make your bracelet the correct size.
  3. Tie your knot with some tension in thebracelet.
  4. Tighten your knot from all sides.
  5. After cutting the elastic cord, add a dab of glue to theknot.

Click to see full answer.

Beside this, what is the best stretch cord for making bracelets?

Most beads have at least a 1mm hole that easilyaccommodates the 0.8mm or 1mm stretch cords. Either of thesesizes are good for stretch bracelets. We recommendPowercord® for its strength and resilience. Powercord ranges indiameter from 0.5mm to 2mm and comes in clear and several popularcolors.

Also Know, what size is a beading needle? The size 12 English beading needle is ahigh-quality, durable needle. Beading needles arelonger than standard sewing needles, enabling you to stringmultiple seed beads and other beads. Use size 12beading needles with beading threads size Dand smaller, and use with 15° seed beads orlarger.

Similarly, you may ask, what size stretch Magic should I use?

Stretch Magic Elastic Cord (Price Varies)

  1. The 0.5 mm cord is great for smaller, lightweight beads thathave a smaller bead hole.
  2. The 0.7 mm is an all-round stretch cord because you can putalmost any type of bead on this cord.
  3. The 1 mm is best for heavier gemstones and bigger beads.

What is the strongest beading cord?

Miyuki Dura-Line Beading Thread is astrong and flexible white beading thread made from100% polyethylene. It is one of the strongest fibercords per diameter.

Related Question Answers

Florenci Leibov

Professional

What is Stretch Magic?

Stretch Magic is a strong, clear, and opaqueelastic cord for jewelry making, available in several differentstyles. The secret is a high-tech polymer that does not crack orbecome hard over time.

Sallam Sardeira

Explainer

How do you knot stretch magic?

How To Knot Stretch Magic For Bracelets
  1. Cross over the two ends.
  2. Then with your right-hand, wrap round two times.
  3. Pull each end to tighten making sure the beads have cometogether.
  4. Keeping the first knot secure and repeat step 2 & 3. Makesure the knot is tight and has fully closed, then trim ends tofinish.

Abdelhakem Haitel

Explainer

What string do you use for beaded bracelets?

With all types of cord, you can use cord ends tofinish off your project or you can simply just knot it. Flexiblebeading wire such as Soft Flex®, Beadalon and Tigertailis a popular choice when it comes to stringing beads fornecklaces and bracelets.

Mendy Rilk

Explainer

What size cord do I need for 8mm beads?

Bead Hole Sizes
Czech Glass - Druk
Bead Size Hole Size mm / inches Maximum Wrapping Wire Gauge
6mm 1.05mm / 0.043" 20
8mm 1.05mm / 0.043" 20
10mm 1.31mm / 0.05" 18

Zaharia Nandakumar

Pundit

Can you use crimp beads on stretch magic?

Pull both ends of the Stretch Magic until thebeads are right up next to the crimp bead. Usethe tips of the chain nose pliers to grasp the crimp bead.Squeeze the crimp bead flat with the chain nose pliers. Cutoff the excess elastic with a sharp pair of scissors.

Nikolas Stockhoff

Pundit

What is an e bead?

Size 6 is the largest seed bead and is oftencalled an 'E' bead. Here is a little background onwhy seed beads are sized this way: When seed beadswere first being manufactured, the standard size bead wasreferred to as the “null” or “aught”bead.

Michiko Barteldrees

Pundit

How much does it cost to restring pearls?

If you have pearls or beads that are simplystrung the cost to restring pearls, without knots, is $1.50per inch plus $6 for the silk thread.

Zviad Rolofs

Teacher

How do you make a paracord bracelet?

Make a Paracord Survival Bracelet
  1. You will need a small shackle and at least 10ft ofparacord.
  2. Find the middle point of the cord and fold it evenly inhalf.
  3. Measure how many inches long you want the bracelet to be.
  4. The first two knots are the base of the bracelet.
  5. Pull that cord snug against the rest.
  6. Repeat the process with the left cord.

Bret Papp

Teacher

What are crimp beads?

Crimp beads are most often used when stringing abeaded piece (like a bracelet or necklace) which has been strungwith beading wire. The crimp beads finish the end of thebeaded piece of jewelry and help create a loop for the clasp to beattached to. There are two kinds of crimp beads: tube-shapedand round shaped.

Karina Schonpflug

Reviewer

How do you adjust a cuff bracelet?

Place the cuff in your palm with the center stonefacing down. Bring your fingers down to hold the back of thecuff firmly. Use your thumb and 1st finger to gently bendthe arms of the bracelet and make your adjustment bybending this portion of the bracelet. Bend gently andadjust a little each time.

Nannie Ladislao

Reviewer

Who makes stretch magic?

Stretch Magic is manufactured by the PepperellBraiding Company. The company was founded in 1917 as a shoelacemanufacturer. They went on to make cigarette lighter wicksand candle wicks. In the late 70's, the company moved into thecraft market with macramé products.

Linsey Schlinkschroder

Reviewer

How do you size a stretch bracelet?

To measure for a stretch/expandable stylebracelet, hold the hand and fingers extended with the thumbcupped in then measure around the widest part of the hand.If you are unable to measure the recipient, the averagesmall size is approximately 7-inches and stretches to8-inches.

Madalena Aschhoff

Supporter

How do you measure beads?

Topics: Beads, Measuring
The most common way to measure a bead isin millimeters (mm) using a caliper. To use a caliper, slide openthe tips, place the tips against the outside of the bead,close the tips down to meet the bead then read themeasurement. Digital calipers do the reading for you and aresuper accurate.

Merrie Galbete

Supporter

How long should a bracelet be?

For women's bracelets, the standard length is 6.5to 7.5 inches. A bracelet of 7 inches is the most common inwomen's jewelry. Men's bracelets are longer at 7.5 to 9inches. A bracelet of 8 inches is the most common in men'sbracelets.

Telmo Rodado

Supporter

What is the best string for friendship bracelets?

Embroidery floss, such as Anchor, DMC, or J&P Coatsis the most widely used thread for making bracelets.It's 6 stranded, 100% cotton, usually has a luster, and can beseparated to make smaller bracelets. When knotted up, theknots look smooth.

Klara Guttman

Beginner

How do you make a square knot?

How to Tie a Square Knot
  1. Hold an end of the rope in each hand.
  2. Pass the right end over and under the rope in your lefthand.
  3. Pass the rope end now in your left hand over and under the onenow in your right.
  4. Tighten the knot by pulling both running ends at the sametime.

Saeed Baewski

Beginner

How do you measure friendship bracelets?

Measure out the proper length for your embroideryfloss. To make sure your bracelet is long enough,measure from the tip of your fingers to your shoulder, andthen double it. If you're making the bracelet for a child,measure from his finger to shoulder.

Baghdad Jalabert

Beginner

How do you end a friendship bracelet?

Method 1 Tying One Loose End to a LoopedEnd
  1. Make a loop before starting your friendship bracelet.
  2. Make 2 braids out of the frayed end.
  3. Feed 1 braid through the loop and tie for easy security.
  4. Make a sliding knot if you want an adjustable bracelet.
  5. Braid the ends through the loop if they're long.