Asked by: Spiridon Lehnertz
automotive auto safety technologies

How do you turn off the headlights on a Acura MDX?

43
To disable the system: Pull and hold the headlight lever toward you for about 40 seconds, until the indicator flashes twice. To enable the system: Pull and hold the headlight lever toward you for about 30 seconds, until the indicator flashes once.


Also question is, how do I turn off automatic high beams?

To disable the system: When the vehicle is on and parked, pull the headlight lever towards you and hold it for 40 seconds. The auto high-beam indicator blinks twice. To re-enable the system: Pull the headlight lever towards you and hold it for 30 seconds. The auto high-beam indicator blinks once.

Additionally, how do you turn on automatic headlights? To turn on the headlights in a car, look for the control panel or control arm near the steering wheel. After you've located the headlight control panel, turn the indicator so that it is pointed to a symbol that looks like a sun or upside-down light, which should turn on your headlights.

Just so, how do you turn off IntelliBeam headlights?

IntelliBeam can be disabled by the High/Low-Beam Changer or the Flash-to-Pass feature.

How It Works

  1. Place the turn signal lever in the neutral position.
  2. Turn the exterior lamp control to AUTO.
  3. The blue high-beam on light will appear on the instrument cluster when the high beams automatically turn on.

What are automatic high beams?

The Automatic High Beam helps ensure excellent forward visibility when driving at night. It detects both the headlights of oncoming vehicles, and the tail lights of vehicles ahead, automatically switching between high and low beams to avoid dazzling other drivers.

Related Question Answers

Amani Hinzemann

Professional

How do you turn on low beams?

Simply point your switch to the low beam symbol to turn on your dipped beam headlights. On the other hand, you can opt for high beam headlights by pushing and pulling the turn signal lever. To sum it up, use low beams when road visibility is relatively poor.

Khalil Maillet

Explainer

When should you use your high beams?

If there are no oncoming vehicles, turn on your high beam headlights. In general, you should always use high beams outside cities and in rural areas, as long as there are no other vehicles around. Dim your lights when there are oncoming vehicles, or when you are approaching another vehicle from behind.

Lisard Guerin

Explainer

How do you keep high beams on?

Turning On The High Beams
To turn on the high beams in your car, you again need to use the blinker lever. The very simple way of turning the high beam on is to push the blinker lever away from you. While pushing away the lever, you must feel the click to be sure that the high beams are turned on.

Anahi Markowsky

Explainer

How do you turn off automatic high beams on a Honda Civic?

The auto high beam system indicator comes on. To turn the system on: Pull and hold the headlight lever toward you for about 30 seconds, until the indicator flashes once. To turn the system off: Pull and hold the headlight lever toward you for about 40 seconds, until the indicator flashes twice.

Treasa Makarova

Pundit

Where are high beams located?

High-beams are also located at the front of your vehicle and have a higher luminosity that covers greater distance. High-beams are to be used in times of very low visibility. However, you are not to use high-beams in fog, for they will only reflect the dampened air and blind other drivers.

Tawfiq Hamburger

Pundit

What is the DRL system on an Acura MDX?

Daytime running lights, sometimes referred to as DRLs or DTRs, are lights that switch on automatically when your 2009 Acura MDX is turned on and in drive. Since the daytime running lights are on whenever you are driving your MDX, they are often the first bulbs to burn out.

Oum Mondaza

Pundit

What does DRL mean on Acura MDX?

Daytime Running Lights