Asked by: Adalia Traveria
home and garden indoor environmental quality

How much are heated concrete floors?

31
Electric radiant floor heating costs about $5 to $7 per square foot for the materials or $8 to $12 or more per square foot with professional floor installation.


Just so, is radiant floor heating cost effective?

Radiant heating systems supply heat directly to the floor or to panels in the wall or ceiling of a house. Radiant heating has a number of advantages. It is more efficient than baseboard heating and usually more efficient than forced-air heating because it eliminates duct losses.

Beside above, do heated floors use a lot of electricity? Most electric floor heating systems use 12 watts per hour per square foot, meaning a 100-square-foot room would use 1200 watts in total every hour, or 300 watts LESS than the average space heater. A floor heating system would not only cost less to run in this scenario, but it would also heat the room evenly.

Accordingly, are heated floors worth it?

In short, if you already have plans to replace the flooring in a room, then installing in-floor heating is definitely worth it. These radiant heating systems must be installed under the flooring, which means the best time to install heated floors is when you're updating the flooring anyway.

How long do heated floors last?

35 years

Related Question Answers

Raimond Robredo

Professional

Is radiant heat cheaper than forced air?

Radiant heat is much more efficient than forced air, and after the initial cost of installation, these systems will save you money on your energy bills every month. You'll also get increased comfort because temperatures stay consistent.

Moise Vitram

Professional

Can you put rugs on heated floors?

Therefore, you should never put carpets or rugs on top of a wood floor where there is in-floor heating. However, some rugs are suitable for use with the underfloor heating system. Consider using a rug with a thermal resistance rating of 1 to 2.

Reginald Luddecke

Professional

What are the pros and cons of radiant heat?

Pros and Cons of Radiant Heat
  • Uniform heating. The biggest benefit of floor-heating systems is their ability to uniformly heat a room and floor.
  • No maintenance. Electric floor-heating systems do not require maintenance.
  • No noise.
  • Non-allergenic.
  • Energy efficient.
  • Easy to install.

Joaquima Zelenev

Explainer

Can you heat a whole house with radiant floor heating?

The short answer to “Can you heat your entire home with radiant floor heating”? is yes. In theory, as long as you have a floor, you can utilize radiant floor heating. The heating system goes right into the floor, heating water or using electricity in an infrastructure of pipes.

Bonnie Jacquemin

Explainer

What is the best flooring for underfloor heating?

The best type of flooring to use with underfloor heating is tile and stone. Tile and stone have high thermal conductivity, meaning that the heat from an underfloor heating pipe or wire transfers to the floor surface quickly. Tile and stone also retain heat well making the system efficient.

Rich Aufdem

Pundit

Can in floor heating heat a house?

A room in a well-insulated modern house can usually be effectively heated using electric radiant floor heat. However, you must also consider the heat-loss value of a room. But remember, radiant floor heat does not heat the air, it heats the objects that are in contact with it, such as people and furniture.

Suzette Satoris

Pundit

Are heated floors safe?

Understandably, one of the questions people have regarding electric underfloor heating in a bathroom is whether the system is safe, taking into account the fact that water and electricity are a dangerous combination. The simple answer is yes, electric heated floors are a safe form of heating.

Aysha Brasch

Pundit

Do heated floors increase home value?

Homeowners may also assume that because a radiant floor heating system can be viewed (and financed) as a home improvement, its installation will immediately raise their home's value. No evidence exists suggesting that in-floor heating either positively or negatively affects property values.

Ibon Theyson

Pundit

Does a heated floor need a dedicated circuit?

Radiant-floor heating has been around for centuries. The principle is simple: The floor radiates heat to your feet, warming you all over. If you're installing radiant floor heat in an existing room, you'll need a dedicated 15- to 20-amp GFCI-protected circuit to power the system, and an excuse to lay a new tile floor.

Gabirel Lehmbruck

Pundit

Can you put heated floors in basement?

The warmth from the hot water seeps through the concrete and heats the basement. This type of basement floor heating is very expensive to install, but it can be placed in established homes just as easily as new homes. A licensed installer must put hydronic radiant floor heating in your basement.

Aurea Landgraf

Teacher

How much does it cost to install in floor heating?

According to CostHelper.com, you can expect to pay from $6 to $16 a square foot for a professionally installed hydronic radiant floor heating system in an existing home, or $9,000 to $22,500 or more for a 1,500 square foot home, depending on the number of temperature zones and the overall size of the system.

Enguia Lorenz

Teacher

Is underfloor heating cheap to run?

It costs less than 10p to run 1m2 of standard underfloor heating at full power for six hours. Although some people still expect underfloor heating to be expensive to run, the reality is that both the initial installation cost and the ongoing running expenses can represent great value for money.

Ridha Taracido

Teacher

How do you install heated floors in a bathroom?

Table of Contents
  1. Step 1: Expose the Subfloor.
  2. Step 2: Apply a Crack-Suppression Membrane.
  3. Step 3: Install the Grids for the Radiant-Heat Wires.
  4. Step 4: Snap the Cables Into the Grids.
  5. Step 5: Mix and Spread the Thinset Mortar.
  6. Step 6: Power the Radiant-Heat Floor.
  7. Step 7: Determine the Layout.

Nebil Segarra

Reviewer

How much does it cost to install heated floors in a bathroom?

The Costs. The average reported cost to install bathroom floor heating for 100 square feet is $600. The minimum average cost reported for installing bathroom floor heating for 100 square feet is $475. The maximum reported cost for installing bathroom floor heating for 100 square feet is $725.

Roel Borgman

Reviewer

Do you need special tiles for underfloor heating?

Both ceramic and porcelain tiles make ideal floor finishes for use with either electric or water underfloor heating. Tiled floors also provide a durable, hard-wearing surface which are easy to maintain. Warmup's underfloor heating systems are suitable for all kinds of tiled rooms.

Primavera Warnkens

Reviewer

Is it better to leave underfloor heating on all the time?

It is advised that in the depths of winter, an underfloor heating system should be kept on at all times. Although it should be at different temperatures depending on usage and activity in the house. This is because underfloor heating can take two to three hours to warm up, so it is best to not completely turn it off.

Simao Simha

Reviewer

Is electric underfloor heating worth it?

When renovating your bathroom, underfloor heating is especially worth thinking about. You will save a lot on the labour cost if the flooring is being lifted up and changed anyway. The comfort and the cost savings of running the system on your heating bills will work out to your advantage in a longer run.

Abdelmoughit Paulmayr

Supporter

Can you heat concrete floors?

Due to their high thermal-mass, concrete floors are ideal to be heated by an underfloor heating system. Concrete provides quick heat-up times and retains heat well, even storing the warmth produced by solar gain, making a heated polished concrete floor a great option to improve the comfort and warmth of your home.

Mames Pehterev

Supporter

How do you install electric floor heating?

9 Easy Steps to Install Electric Radiant Floor Heating
  1. Start with a floor plan. An important step to a frustration-free installation is to start your project with a professional floor plan.
  2. Order your materials.
  3. Test your products.
  4. Inspect the subfloor.
  5. Begin installation!
  6. Install the sensor.
  7. Test again.
  8. Connect to the thermostat.

Co-Authored By:

EveryThingWhat Staff Editor

15

3rd March, 2020

59

88% of readers found this page helpful.

4.2/5

Click a star to add your vote

Similar Asks
Trending