Asked by: Lilia Troll
home and garden home appliances

How much does a fireplace and chimney cost?

The cost can range from $7,500-$15,000 for the labor and materials to construct the fireplace alone without installation. A brick fireplace can range from $5,500 to $11,000. Installation may add another $2,500-$10,000 depending on if there is a chimney already built. If not, it will add $60-$95/linear foot.

Also to know is, how much does it cost to install a wood burning fireplace and chimney?

Fireplace Cost Fireplace installation costs between $100 and $5,600 depending on the type. The cost to install a gas fireplace is $2,300 to $4,000, a traditional wood-burning fireplace runs $1,900 to $3,300, and an electric fireplace costs $100 to $2,200. Building a masonry fireplace costs $3,500 to $5,600.

Also Know, how much does it cost to fix a fireplace? The average cost of a chimney repair is between $300 and $4000. The repair costs depend on the extent of the damage, the materials (type of brick, lining, flashing, etc), the current condition of the chimney crown, and the location of the chimney.

Correspondingly, how much does it cost to install a chimney?

Chimney installation

Chimney installation costs
National average cost $4,500
Average range $3,000 - $6,000
Minimum cost $2,400
Maximum cost $10,500

Does adding a fireplace increase home value?

A homeowner can often recover over 100 percent of the expenses associated with adding a fireplace upon selling their home. According to the National Association of Real Estate Appraisers, adding a fireplace to home can increase the resale value of the home by as much as 6-12 percent.

Related Question Answers

Andreu Virga


Does a zero clearance fireplace need a chimney?

Zero-Clearance Fireplaces do not require a hearth in order to function properly. There are a lot of benefits to heating your home with a Zero-Clearance Fireplace. Often much more than a traditional open fireplace which means less heat and energy is wasted up and out the chimney.

Yurik Hahlbohm


Does a wood burning fireplace need a chimney?

Yes, it is possible to add a wood burning stove or a fireplace without an existing chimney, but you do need to install a chimney in the process. All wood burning fireplaces have to have a way to allow smoke and dangerous gases to exit your home.



Can you add a wood burning fireplace to a house?

Yes, you can add a fireplace to your house! The type of fireplace you can add depends on where you live. Here's what to think about as you're doing research: Local ordinances, if you want to build a wood-burning fireplace.

Emy Mahtiev


Do you need a chimney for a gas fireplace?

Ventless fireplaces fueled by gas or propane rely on indoor air for combustion, and they exhaust a low level of their combustion gases into the room in which they're located. A chimney or flue isn't necessary. The risk to your health is a long-standing and ongoing debate.

Dayanara Zschommler


How much does it cost to build a brick fireplace and chimney?

A mason-built brick fireplace costs $3,500 to $5,000. If installing a gas burning fireplace, plan on spending $750 to $1,000 for a gas log kit. The addition of a new chimney might cost $60 to $100 per linear foot for an engineered chimney and $100 to $200 per linear foot for a masonry chimney.

Aimin Francis


Are electric fireplaces worth it?

The electric fireplace is energy efficient and cost effective. There is no risk of losing the heat through the venting as the case with gas fireplaces. A gas fireplace can lose 20% to 30% of the heat through the venting decreasing the efficiency.

Ahmidou Planchon


How much does it cost to put a flue in a chimney?

For the average homeowner, having a chimney liner installed costs about $2,500. For more expensive materials, prices tend to average at $5,000 and could climb to $7,000. With an easy-to-install material like aluminum, the DIY cost of materials and equipment could be as low as $625.

Marjolein Golovanov


How much does it cost to seal a chimney?

Average Prices of Chimney Repair Work
According to 2017 averages across the country, homeowners may spend anywhere from $85 to $1,600 on fireplace repair work of all kinds. Water leak repairs along the roofline and chimney crown repair can cost anywhere from $150 to $350 on average.

Guillen Terliesner


Can I add a fireplace to my home?

Adding a New Fireplace for Your Existing House Is Possible
If you're willing to shell out the money, regardless of the potential to get it back when you sell your home, and your area's building codes allow it, then adding a fireplace to your existing home can be a great way to increase its value to you and your family.

Gartxot Bauke


How much does it cost to tear down and rebuild a chimney?

If cracks are the only issue with the chimney, you can expect to pay around $200 at least. A complete rebuilding of your chimney from the crown to just below the roofline can cost $1,000 - $3,500 or more. A full chimney demolition all the way down to the fireplace can cost $10,000 or more.

Kamal Lubutin


What is an engineered chimney?

An engineered chimney is made up of metal sections of pipe that are joined together and installed with the fireplace. While the materials on this type of chimney may cost more than those of a more traditional brick and mortar chimney the labor is much less involved and therefore much cheaper.

Anri Lillmanntons


What is the best fireplace insert?

Find the Best Fireplace Inserts of 2020 (Buyers Guide)
Name Our Rating
Vogelzang TR004 Colonial EPA 8/10
Napoleon EPI3C Cast Iron EPA Contemporary 9/10
Century Heating High-Efficiency 7/10
Timberwolf Economizer Wood Burning Fireplace Insert 8/10

Aichatou Lienhart


How do I know what kind of fireplace I have?

Each fireplace and insert has a rating plate which contains your model number and serial number. Gas and wood burning fireplaces have a rating plate in the control compartment area, under the smoke shield or on the firebox side column.

Katiana Guillaumes


Is chimney repair covered by home insurance?

Common chimney work like masonry repair, damper repair or chimney cover replacement in general are not covered by homeowners' insurance policies. When the repairs are part of normal wear and tear insurance companies again see this as a homeowner's responsibility in operating the fireplace and chimney safely.

Aramis Foitinho


How dangerous is a cracked chimney flue?

Cracked tiles can lead to dangerous gas leakage allowing carbon monoxide to seep into the home's interior. It can also allow deadly heat transfer to combustible materials in the surrounding areas increasing the risk of home fire. Cracked tiles often occur when heat is not evenly disbursed throughout the chimney.

Laima Benndorf


Why are gas fireplace inserts so expensive?

However, gas inserts will usually produce less heat than a built-in gas fireplace. They are more expensive than gas logs, but less expensive than a fully built-in gas fireplace. That being said, due to its efficiency, gas inserts cost far less to operate than gas logs because they require less gas.

Panagiota Orlamunder


How do I fix a crack in my chimney?

Individual chimney bricks that have a small crack or two can be repaired with a high-heat mortar and a caulking gun.
  1. Clean out the crack with the edge of the putty knife or with the screwdriver.
  2. Sweep the crack clean with the wire brush.
  3. Squeeze the high-heat mortar into the crack as far as possible.

Mfaddal Diente


How much does it cost to tile around a fireplace?

Prices for leading fireplace tiles include: Natural Stone: $25 to $40 per square foot installed. Ceramic: $20 to $35 per square foot installed. Glass: $25 to $40 per square foot installed.