Asked by: Romer Pirtskhalava
automotive auto parts

How much does a motorcycle brake job cost?

44
The pads and cables themselves might run anywhere from about $10 to $40, depending on type, quality, and whether or not you need to replace the cable housings, so you're looking at a total cost from about $45 to $75.


In this regard, how much is a motorcycle brake job?

Average cost for brake job. The pads cost about $30 per wheel. Took me about 30 to 40 minutes per wheel to change mine. So, about $60 for parts ans an hours labor would be my guess.

Also, how much should it cost to replace brake pads and rotors? Average Brake Pad Replacement Cost
Pads & Rotors Cost Range
Rotors (Parts) $30 to $75 each
Pads (Parts) $35 to $150
Labour $150 to $200
Total $250 to $500 per axle

Besides, how much should it cost to replace brake pads?

The average brake pad replacement cost is $150 per axle, and can range from $100 per axle up to $300 per axle. There are a few other pieces of hardware that are found in the brake system which might need to be serviced as well, including calipers and rotors, but the most common service will be to replace brake pads.

How long do motorcycle brakes last?

Brake pads should last thousands of miles, and can last tens of thousands of miles, but you should rely on physical indicators of pad life (such as pad thickness, or wear indicator grooves in the pad) to determine how long your pad life, instead of an arbitrary amount of time or miles.

Related Question Answers

Gianpaolo Laime

Professional

Can I just replace brake pads and not rotors?

When To Replace Brake Rotors
Maybe not every time. In fact, some manufacturers recommend simply replacing the brake pads themselves without resurfacing or replacing the rotors, as long as the rotors measure more than the minimum thickness and they spin true (are not warped).

Gertrudis Bode

Professional

When should I change my motorcycle brake pads?

Make it a habit to visually inspect your brake pads on the bike, before a ride and during oil changes, etc. You may need a flashlight, but look into the calipers, including the back side as there are inner and outer pads. If the friction lining has worn down to about an eighth inch or less, it's time for replacement.

Niall Seligrat

Explainer

Why are my brakes squeaking?

Brake squeal is common and can be caused by a number of conditions: Worn pads, glazed pads and rotors, broken anti rattle clips, lack of pad insulation or insulation shims, and incorrect rotor surface cut or no surface cut at all.

Anayansi Belkacem

Explainer

Should I replace all 4 rotors?

As long as you have both front disk brake pads replaced and rotors turned or replaced as well, it should be fine to complete the rear brakes shortly after. Although it is recommended by Ford to replace all four wheel brakes at the same time for safety, your idea should be OK.

Jannette Berman

Explainer

How do you know if your brake calipers are bad?

One of the most common symptoms of a bad or failing caliper is brake fluid leakage. The calipers operate using brake fluid pressure from the master cylinder and pedal to extend the piston and slow the vehicle. You may notice a puddle beneath your car and the smell of burnt rubber from the leaking fluid.

Shavonda Chardi

Pundit

How much does it cost to replace all 4 brake pads and rotors?

That said, for brake pad replacement only, you can expect to pay between $35 and $150 for parts for all four wheels. Labor typically runs between $80 and $120 per axle, making for a grand total of between $115 and $270 per axle. Replacing rotors with your brake pads is critical for best braking and maximum safety.

Zoubida Cavilla

Pundit

How often should I change my motorcycle brake fluid?

As a general rule, it is recommended to change the brake fluid once a year or every two years. Of course, this also depends strongly on the way of driving and the mileage. The reason for this measure is that brake fluid is very hydrophilic, that means it tends to absorb water.

Dolly Machleit

Pundit

Can I change brake pads myself?

While it might seem intimidating, changing your brake pads is a ridiculously easy process that nearly anyone can do with the right tools. Once you get used to doing it, you can replace your brake pads in an hour or so. Not to mention, you can save hundreds of dollars over the long run by doing the job yourself.

Alzbeta Drebes

Pundit

How long does a brake job take?

As you can see there is a lot to be done on a proper brake job. Depending on the condition of the brake system when you first start. On average it takes about 1 1/2 - 2 hours to complete(including resurfacing the rotors) on a common disk brake type vehicle.

Laszlo Livingstone

Pundit

How do I know when my rotors are bad?

Pay attention to what you feel while driving. One of the most common indicators of worn out brake rotors is rattling, wobbling, or shaking while braking. These vibrations are normally felt through your foot as you apply the brakes, and it is usually indicative of brake rotors that have become warped.

Juraj Altenstrasser

Teacher

What does a brake job cost?

Average Costs
According to Repair Pal, labor costs for larger brake jobs such as a rotor replacement are around $160-$200. Parts and materials for this job and other similar jobs are usually priced between $250-$360. So overall, a brake job can cost you anywhere from $400-$600 depending on a wide variety of factors.

Ora Nogueiro

Teacher

How do I know when my brake pads need changing?

5 Signs It's Time to Replace Your Brake Pads
  1. Squeaking or Squealing Noise Coming From Brakes. The first sign that it's time to replace your brake pads is if you hear persistent squeaking or squealing.
  2. Indicator Light Turns On.
  3. Deep Grinding Metal Sound.
  4. Vibrating Brake Pedal.
  5. Brake Pads Appear Less Than A ¼ Inch Thick.

Iliev Talisnick

Supporter

How much do new rotors cost?

The average cost for a brake rotor replacement is between $406 and $559. Labor costs are estimated between $158 and $200 while parts are priced between $248 and $359. Estimate does not include taxes and fees.

Paolo Lynsmeier

Beginner

Jinane Bai

Beginner

How often do rotors need to be replaced?

In answer to how often do brake rotors need to be replaced, they can last anywhere from 30,000 to 70,000 miles, and sometimes more. A licensed mechanic can evaluate the rotors and advise you on their status.

Krum Luttmann

Beginner

Can you turn motorcycle brake rotors?

you do not need to turn them. Your new pads will adapt to your rotors after a bit of braking.

Zelma Cercea

Beginner

How long do motorcycle brake rotors last?

In fact, one typical set of rotors, when properly maintained and mated to the right pads, can go through up to 3 or 4 sets of pads before needing replacement! However, there are some times when you absolutely should replace your rotors. If they are warped, they should be replaced immediately.

Ann Frialva

Beginner

How do you clean your brakes?

How to Clean Disc Brakes
  1. Park the car on a level surface and set the parking brake.
  2. Remove the two caliper retaining bolts.
  3. Slide the brake pads out of the caliper.
  4. Open the hood and loosen the cap on the brake fluid reservoir.
  5. Clean the brake disc, or rotor.
  6. Clean the brake pads.
  7. Clean the caliper.