Asked by: Mackenzie Quirante
home and garden indoor environmental quality

How much does a roll of torch down cost?

Last Updated: 4th May, 2021

39
The average price range for bargain-grade or discounted torch down roofing is $365 up to $460 for 1,200 square feet. Superior-grade materials for an area of the same size can cost anywhere from $850 up to $1,075.

Click to see full answer.

Likewise, how long is a roll of torch down roofing?

15 to 20 years

Also Know, what is 3 layer torch down roofing? A two-layer torch down roof consists of one base sheet and one smooth cap sheet. A three-layer torch down roof features the same base and cap sheets, as well as an additional cap sheet with a granulated surface.

Also Know, how much does a roll of torch down weigh?

90 to 105 pounds

Is torch down roofing good?

Torch down roofing is completely impermeable to rainwater and is also resistant to otherwise damaging UV rays. It won't melt or gather large puddles of rainwater, so it is already weatherproof to a good extent. Torchdown roofing is extremely durable.

Related Question Answers

Artak Uzhva

Professional

What goes under torch down roofing?

A mat of fiberglass, polyester, or other material is often used as a sturdy core for torch down roofing membranes. Manufacturers also may embed small granules into the top of the membrane to add fire resistance, color options, ultraviolet (UV) radiation protection, or other distinctive characteristics.

Breanne Ziegeler

Professional

How much does it cost to install torch down roofing?

Cost of 3 Layer Torch Down Roof
3 Layer Torch Down Roof Costs Zip Code Sq. ft.
Basic Better
Installation Cost $220.00 - $240.00 $265.00 - $280.00
Total $385.00 - $415.00 $455.00 - $490.00
3 Layer Torch Down Roof – Total Average Cost per square foot $4.00 $4.72

Jeaneth Zaldua

Explainer

Onel Marcilla

Pundit

Can you shingle in the rain?

A wet installation can also cause a new roof to fail. Shingles and roofing materials may not adhere properly to slick surfaces with high humidity. If the sheathing or wood is wet during the time of installation, it can trap moisture inside of your roof, leading to mold, rot, or other severe problems.

Terencia Carapeto

Pundit

Can you put torch on felt over old felt?

Use torch on felt. You can go over old felt with new. Remember to overlap the felt and dont butt the felt up against each other.

Anabela Agnelo

Pundit

Does shingle weight matter?

Basic Shingle Construction
The quality of asphalt shingles is in direct proportion to their weight per square (100 square feet). Heavier shingles (up to 350 pounds per square) generally last longer than the lighter shingles (200 pounds per square).

Justino Newsome

Pundit

Can a roof support a person?

The limit of the load a given roof can support is determined by its specific design, but typical roofs are expected to withstand a few commonly anticipated loads, such as the weight of people working on it.

Aldara Raav

Pundit

How much weight can you put on a roof?

The dead load for normal shingled or wooden roofs is around 15 pounds per square foot, while it's closer to 27 pounds per square foot for a more sturdy material like a clay tile or metal roof.

Vsevolod Atiskov

Teacher

How much does 100 yards of carpet weigh?

Carpet can weigh anywhere from 5 to 20 pounds per square yard, or .

Robson Alpert

Teacher

How many bundles of shingles do I need for 1800 square feet?

An average roof size is about 30 squares so (3,000 ÷ 100 = 30). This means you would need 30 squares of shingles to replace that roof. The most common type of shingle, called a three-tab or strip shingle, is generally packaged three bundles per square so you would need about 90 bundles.

Dorina Witkin

Teacher

Jhoana Moriel

Reviewer

Fei Tato

Beginner

What is a modified roof?

Modified bitumen is a type of asphalt product that can be applied in a number of ways to the roof in both hot and cold temperatures. Modified bitumen roofs have a lot of advantages over other types of membrane roofing, and are often seen as the modern alternative to the built up roof.

Keisha Geraldes

Beginner

How do you install tri ply roofing?

Tri-Ply must have base sheathing that is at least 1 inch thick. If installed over plywood, the base must be at least four-ply and exterior grade. Joints should be no more than 1/4 inch apart. Fill all gaps between plywood as well as knot holes in the plywood with sheet metal nailed to the sheathing with roofing nails.

Amandina Hatskevich

Beginner

Can you walk on torch down roofing?

The torch-on roofing is extremely durable. It has a superior strength that it can resist tears and punctures due to various external factors like walking on the surface.

Enoch Guzenko

Beginner

Iago Babentsev

Beginner

Gonzala Grohsimlinghaus

Beginner