Asked by: Anneke Daif
home and garden home appliances

How much does a water heater for a mobile home cost?

Last Updated: 20th March, 2020

Water Heater Installation Cost. Installing a water heater costs $799 and $1,502, or an average of $1,120, including the unit and labor. Tankless heaters cost about $1,000 to $3,000. Water heaters cost $300 to $2,000+ for the unit alone while plumber labor runs $45 to $150 per hour.

Click to see full answer.

In this manner, how much does a water heater cost for a mobile home?

New Hot Water Heater Installation Prices

Type Average Unit Price Range Installation Cost
Standard Tank Storage $400-$1,600 $150-$600
Tankless $250-$2,500 $400-$1,500
Hybrid/High Efficiency $700-$3,000 $150-$600
Solar $1,000-$6,000 $2,000-$4,000

Likewise, what size water heater goes in a mobile home? It's common to find anywhere from 40 to 60-gallon hot water tanks in conventional homes, but most mobile home water heater closets are only able to accommodate sizes of up to 30-gallon tanks. This is a key reason why you can't just install a standard water heater in a mobile home.

Correspondingly, can you put a regular hot water heater in a mobile home?

Yes. Mobile homes, also known as manufactured homes, are required to comply with the rules laid down by the U.S. Department of Housing and Urban Development. Mobile home water heaters have interchangeable gas and propane orifices so that the water heater can be converted from natural gas to propane gas operation.

How do you replace a water heater in a mobile home?


  1. Shut off the Water and Gas. Close the shutoff valve on the cold water supply line feeding the water heater.
  2. Drain the Tank.
  3. Remove the Old Water Heater.
  4. Install a Drip Pan.
  5. Add the TPR Valve.
  6. Place the New Water Heater.
  7. Complete the Vent Connection.
  8. Add a TPR Discharge Tube.

Related Question Answers

Mehwish Tschernich


How often should you flush your water heater?

Most homeowners should flush their water heaters every six months or so, but if you have extremely hard water, you may want to do it more often. Flushing your hot water heater could be necessary as often as every few months depending on the mineral content of your local water supply.

Ferdinand Goikoetxea


Which is cheaper gas or electric water heater?

Depending on your local utility costs, gas water heaters are typically cheaper to operate than electric. They also cost more upfront than an electric. However, based on energy savings, gas heaters generally make up the difference in price in about one year. Cost: $300 to $600 for gas; $250 to $500 for electric.

Aixa Temkin


Where are water heaters located in mobile homes?

Most of the time, the water heater in your manufactured home can be located near the home's furnace. Sometimes, water heaters can be found in your master bedroom closet. It could also be found in a utility closet, in the laundry room or even in a hallway hidden behind an access panel that looks just like your wall.

Robert Jahnigen


How much is a 40 gallon water heater?

$650 – $1,611. The cost to install a new water heater ranges from $400 to $900 for a 40 to 50-gallon tank, and between $1,470 and $2,510 for a tankless.

Christie Amediek


What is the best hot water heater for a mobile home?

Ideal for smaller homes and mobile homes, the Reliance 6 20 SOMS K electric is one of the best options for having a regular source of water for showers and washing dishes. If you're looking for an electric water heater that can be installed as a mobile home hot water heater, this model will be a great choice.

Sirlei De Lopez


How do you install a electric water heater in a mobile home?

Installing the New Electric Water Heater
Connect the temperature and pressure relief valve to the new water heater. Connect the new water supply lines to the tank using flexible hose. Install seismic straps to keep the water heater from tipping. Remove the aerator from the nearest faucet and open the hot water valve.

Meta Binda


How do you disconnect a water heater?

Electric: Switch the circuit breaker for the water heater to the OFF position.
  1. TURN OFF WATER SUPPLY. Turn the handle on the water valve CLOCKWISE until it stops.
  2. DRAIN WATER HEATER. Attach a hose to the drain valve at the bottom of the tank.
  3. OPEN THE RELIEF VALVE. Flip handle so it is sticking straight out or up.

Fode Wohea


How do you know when a hot water heater needs to be replaced?

Some signs you need a new water heater are an old unit, rusty water, not enough hot water, noise, or leaks.
  1. An Old Unit. If your water heater is older, you can find its exact age by looking for the serial number on the manufacturer's sticker near its top.
  2. Rusty Water.
  3. Not Enough Hot Water.
  4. Rumbling and Noise.
  5. Leaks.

Armanda Beckenbauer


How much is plumbing for a mobile home?

Replumbing a mobile home costs anywhere from $1,500 to $4,000.

Navila Bernardt


How do you break the sediment out of a hot water heater?

How to Flush Sediment Out of a Water Heater
  1. Turn the Water Heater Off.
  2. Turn the Cold Water Valve Off.
  3. Let the water cool.
  4. Attach a drain or garden hose to the drain valve on the side of the tank.
  5. Place the end of the hose in a bucket or drain.
  6. Turn on a faucet (or two)
  7. Start draining the tank by turning on the drain valve.

Karisa Larrumbe


Are tankless water heaters safe for mobile homes?

Yes, you can add a tankless water heater to a mobile home, but you need to find out what on-site gas or electric changes need to be made in order for your home to accept the tankless water heater. You also need to consider your local climate when determining where to install the water heater.

Alharilla Lovey


Are mobile home faucets different?

Mobile Home Sinks and Faucets
Mobile home sinks are usually always the same standard size as the ones you buy at Lowe's. Most faucets are different but can absolutely be changed out with little effort. Faucets found in Lowe's usually comes with the fittings you need in the box.

Maire Gasch


Does a electric water heater need to be vented?

Venting usually refers to how a fuel burning appliance vents combustion products outside. Electric waters heaters don't need that. Sometimes an relief valve is said to be vented, meaning the discharge sent to a safe location or at least in a safe direction, like at the floor.

Ahmadou Agasaroff


Do you really save money with a tankless water heater?

Tankless water heaters save money in the long run, but initial costs are higher than tank models. The U.S. Department of Energy estimates gas-fired tankless heaters save an average of $108 in energy costs per year over their traditional tank counterparts, while electric tankless heaters save $44 per year.

Luar Junda


What type of pipe is used in mobile homes?

Common Plumbing Pipe Materials
Most plumbing in manufactured homes uses plastic. Plastic pipes include polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), PEX pipe and PolyPipe®. Metal plumbing pipe consists of copper, stainless steel, and galvanized steel.

Mourad Pane


Georgene Tormahlen


Where is the water heater located?

Most water heaters are located in the home's garage, basement, or attic. Water heaters (not including tankless) can take up a lot of space. These areas are usually the best place to store your heater to best accommodate the size.

Naiane Poroykov


How do you change out a water heater?

How to Replace a Water Heater
  1. 01 of 10. Introduction.
  2. Shut Off the Water and Gas or Electricity. Shut off the water main at the water meter.
  3. Drain the Water Heater Tank.
  4. Disconnect the Water Heater.
  5. Remove and Replace the Water Heater.
  6. Install the Relief Valve and Other Fittings.
  7. Connect the Water Pipes.
  8. Connect the Gas or Electricity.

Jinhua Passeiro


Can you put a hot water heater outside?

An indoor tankless water heater is installed inside your home. An outdoor unit is installed outside the home and is designed to withstand the elements. If you live in a climate where temperatures drop below freezing, you must always be sure to take precautions to avoid freeze damage, such as draining the unit.