Asked by: Tristana Jayat
home and garden indoor environmental quality

How much does EIFS cost?

Last Updated: 11th February, 2020

EIFS is one of the most economical systems available, with an estimated material cost per square foot at $0.86 and installation cost of $5 to $6, which compares with the cost per square foot for brick at $1.25 with an installation cost of $8.50.

Click to see full answer.

Regarding this, how much does it cost to repair EIFS?

Nationally, contractors charge anywhere from $40 to $50 per hour to repair stucco, or from $60 to $120 per square foot. The two main reasons for these costs are the complexity of the repair and the fact that it takes time, as it involves waiting for each coat to cure before proceeding to the next step.

Secondly, should I buy a house with EIFS? Buying An EIFS Home So, if you are wondering if you should buy a house with EIFS, the answer is: it depends. An EIFS system that has been installed properly by a certified contractor who has been approved to use the system is ideal—and you can trust the job.

Also, how long does EIFS last?

A. Dryvit EIFS are designed to last for the typical design life of a building. The actual longevity on any specific building will depend mainly on the building maintenance program. Some EIFS facades date back 50-60 years.

How much does it cost to stucco a 2000 square foot house?

Stucco Labor Cost The three coats of stucco needed for a 2,000-square-foot house (1,431 SF of siding) will cost $3,330 to $4,320 to apply depending on whether you want a sand float or trowel finish.

Related Question Answers

Gyorgy Baitchikov


What is the problem with EIFS?

What Are the Problems with EIFS? The problems with barrier EIFS cladding all stem from water intrusion. These problems include moisture accumulation in the wall cavity, subsequent wood damage and, in more advanced cases, mold growth and the infestation of pests such as carpenter ants or termites.

Aytana Minnibaev


Why is EIFS bad?

New EIF systems are built better than before. A: Traditional EIFS: With no drainage capabilities, old EIFS systems had a tendency to harbor moisture, leading to a range of water-related problems. Exterior insulation and finish systems (EIFS) earned a bad rap in the 1980s and '90s.

Donato Valentinov


Can EIFS be repaired?

Strip the EIFS or repair it; that is the question. The answer is quite simple, and applies to virtually all types of cladding. EIFS is not a cladding the average homeowner can repair, and many EIFS repair contractors have not been trained in the forensics and repair.

Azahar Abramovich


Can you power wash EIFS?

Periodically, EIFS finishes may need to be cleaned to remove dirt, algae (usually green stains on the surface of the finish), or mildew (generally black stains that look like dirt) that can accumulate on the surface. Basically, mild cleaning detergents, and low water pressure cool water, and a soft bristle brush.

Viola Verea


What is better EIFS or stucco?

What's The Difference Between EIFS and Traditional Stucco? A traditional hard-coat stucco exterior system is extremely strong and durable because it essentially covers your home with a layer of rock. Barrier EIFS on the other hand, uses a multi-layer “synthetic” stucco that is much softer than traditional stucco.

Fayyaz Cembranos


Can you put siding over EIFS?

If you can nail through the EIFS into the sheathing, that may work. EIFS that is not installed correctly can be VERY VERY bad for your house. It traps moisture behind it and will rot your house. If everything checks out ok then you should be able to install over it.

Suzi Hundertmarck


Is Dryvit the same as EIFS?

Having a house with EIFS, also known as Dryvit, isn't the end of the world. EIFS isn't a disease; it's synthetic stucco. And even though your house may have been built using it, with knowledge and proper maintenance everything can be just fine. EIFS is an Exterior Insulation and Finish System.

Ferial Ekhard


What is EIFS insurance coverage?

Typically, an EIFS system includes insulation board that is secured to the exterior wall surface with a specially formulated adhesive, a water-resistant base coat that is applied on top of the insulation, and a finish coat. This resulted in liability claims against contractors and the manufacturers of EIFS.

Bernabea Herodes


When did they stop using EIFS?

By the mid-1980s, EIFS was commonly found in most mid- to upper-priced residential developments throughout the country. But the business rebounded in 1992 and the EIFS residential business continued to grow—that is until it ran into the perfect storm.

Carolynn Irurita


Does EIFS crack?

Some EIFS laminas crack sooner than others, but they all eventually crack. The cracks are due to hygric and thermal stresses, embrittlement due to aging, and building movement. The cracks in EIFS laminas are often found initially at reveals and at window openings.

Alberta Torta


Should EIFS be painted?

EIFS buildings should not be painted like most surfaces. EIFS surface is an elastomeric or silicone-based coating; regular latex paint will not adhere properly and peeling may result. Some coatings can substantially change the water vapor transmission characteristics of the EIFS and trap moisture inside.

Deolindo Nicoletto


How do you maintain EIFS?

In many cases, the soiled surface can be cleaned with low-pressure cool water, mild cleaning detergents and a soft bristle brush. EIFS are designed to be highly flexible, which makes them exceptionally resistant to the cracking problems that are all too common with stucco, concrete and brick exteriors.

Redwane Bertolini


Does EIFS require control joints?

Reveals in EIFS are strictly aesthetic and are used to provide convenient stopping points for finish application in large wall areas. If movement relief is necessary, a full expansion joint with sealant is necessary. The term “control joint” is not used in the EIFS industry.

Najim Loevsky


Is Dryvit waterproof?

A. The Dryvit Weatherlast products include a waterproof elastomeric coating and primer for use over exterior concrete, masonry, stucco and exterior insulation and finish systems (EIFS). color in a Dryvit DPR finish.

Vaitiare Joynson


How do you pronounce EIFS?

With Urea Formaldehyde Foam Insulation, most of us pronounce it “you-fee” but some insisted on “u-fee.” In Canada “e-fiss” appears to be the preferred pronunciation for EIFS.

Mathias Ammendo


How is EIFS installed?

EIFS are typically attached to the outside face of exterior walls with an adhesive (cementitious or acrylic based) or mechanical fasteners. Adhesives are commonly used to attach EIFS to gypsum board, cement board, or concrete substrates. The supporting wall surface should be continuous (not "open framing") and flat.

Fredi Vieillard


Can Dryvit be replaced?

Replacing Stucco with Siding
There are several types of exterior siding that can be used for Dryvit stucco replacement, but the longest-lasting, most durable siding is produced by James Hardie. Properly installed by a professional siding company, Hardie Siding provides years of a mold-free, safe environment.

Reshma Borruey


Why is stucco bad?

Stucco installation
Water intrusion, which can cause expensive damage, is a consequence of this. If stucco sand becomes mixed with soil around the home, cracking can occur. While cracking can be repaired, the homeowner is most often the party responsible for bearing the burden of the cost.

Jarein Arjonilla


Is Dryvit the same as stucco?

?What Is Dryvit, Anyways? ?Dryvit stucco is actually the name of a stucco manufacturer, not an actual stucco system specifically. Dryvit is the name of the stucco company and they have different stucco systems including 3 coat stucco systems, EIFS systems, decorative systems and more.