Asked by: Alla Barukh
home and garden landscaping

How much does it cost to repair a driveway?

Last Updated: 31st January, 2020

13
If you plan to do driveway patching yourself, expect to pay about $3 to $5 per square foot, about half the cost of hiring a contractor for driveway repair. You'll eventually have to replace concrete and asphalt driveways with deep holes, numerous holes or large cracks.

Click to see full answer.

Similarly, it is asked, how much does it cost to replace a driveway?

The national range for tearing and replacing a driveway is between $6,275 to $8,500. The average is $7,394 for a poured concrete driveway as per Angie's list members. The average cost is $3,500 to $7,000 which $3 to $10 per hour, roughly. The cost may be higher for long or curved driveways.

how much does it cost to repair asphalt driveway? Fixing Your Asphalt Driveway Repairing your asphalt driveway tends to cost between $800 and $2,500, depending on the same factors mentioned above. The national cost average for this project is about $1,500.

Also Know, how much does it cost to repair concrete driveway?

Basic resurfacing starts at $2 to $3 per square foot. That works out to $1,200 to $1,800 for a 600-square-foot driveway and $1,500 to $2,250 for a 750-square-foot driveway, both of which are pretty common sizes.

How much does it cost to seal and patch a driveway?

Patch material and sealer will cost between $2.00 and $2.50 per square foot combined. You should be able to find an asphalt squeegee for somewhere between $25 and $60. Potholes and sinkholes take more work to repair.

Related Question Answers

Nabia Lemus

Professional

Does new driveway increase home value?

Concrete can easily crack in the winter time. Asphalt is more flexible making it less likely to crack over time. Asphalt driveways can last you 20-25 years if properly installed and maintained – a great investment. While they increase the value of your home, a nice paved driveway can also help sell your home FASTER.

Robbie Ondet

Professional

How long does a driveway last?

Asphalt driveways typically last 12 to 20 years, depending on the quality of the installation, the climate, the usage they get, and how well they have been maintained. Like most everything else, the better care you take of your asphalt driveway, the longer it will remain in service.

Vinita Konhauser

Professional

What is the cheapest driveway surface?

Aggregate, or gravel, is the cheapest and most durable of these four common driveway materials.

Meng Raluy

Explainer

Is it OK to pave over an existing driveway?

An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. An existing asphalt surface is the best base for new asphalt. Damaged or troubled areas are repaired before the installation of asphalt.

Delisa Persico

Explainer

Do you need planning permission for a new driveway?

The good news is, you can often create (or replace) a driveway without obtaining planning permission. The key is drainage - if you use a porous material, such as gravel, permeable asphalt or permeable block paving, you won't usually need planning permission.

Amir Vermorel

Pundit

How do you resurface a driveway?

Here are the basic steps to do a facelift on your driveway.
  1. Step 1 - Clean the Driveway. Prepare the driveway by cleaning it thoroughly before you can apply the resurfacer.
  2. Step 2 - Fill the Cracks. Repair any damaged areas, such as cracks and sunken places.
  3. Step 3 - Prepare the Resurfacer.
  4. Step 4 - Apply the Resurfacer.

Domnica Espeso

Pundit

How do I estimate the cost of a paved driveway?

The average cost of a concrete driveway, by comparison, is almost $7,400. Other sources estimate the cost to install an asphalt driveway to be between $2,300 and $10,300. Homeowners typically pay per square foot. Reibling adds the average cost per square foot is between $3.50 and $4.50.

Piere Ruf

Pundit

Does concrete resurfacing last?

Thanks to its advanced bonding properties, concrete resurfacing can last for quite a while. A properly resurfaced floor can last from 8-15 years.

Nahla Burkler

Pundit

How do you repair an uneven concrete driveway?

How to Fix Uneven Concrete Driveways
  1. Surface Preparation. To bond effectively, an overlay needs a clean surface.
  2. Crack Repair. Larger cracks need a bit more attention than smaller ones, but you need to repair all of them before pouring the overlay.
  3. Setting Up Forms.
  4. Pour the Overlay.
  5. Considerations.

Naomi Molen

Pundit

Can a concrete driveway be resurfaced?

Concrete resurfacingIf your driveway is experiencing cracking, scaling or spalling, the best solution is to resurface it with a concrete overlay. Before you can resurface existing concrete, it's important to remove any unsound concrete and repair noticeable cracks so the overlay has a solid base to bond to.

Jozsef Rabinovitch

Teacher

How long does a resurfaced driveway last?

When done properly, resurfacing existing asphalt can add an extra 8-15 years to the current driveway or parking lot. However, a newly reconstructed pavement will last anywhere between 20-30 years with proper care and maintenance.

Bernabe Lohitzun

Teacher

How do I fix my crumbling driveway?

How to Repair a Crumbling Asphalt Driveway
  1. Dig away the loose chunks of asphalt and any broken materials near the cracks with either a wire brush or masonry chisel.
  2. Sweep the loose materials out of the crack using a stiff-bristled broom.
  3. Clean off the dust from the area, using the garden hose with the pressure nozzle.

Sumei Srinath

Teacher

Do it yourself repair concrete?

concrete sealers & repair
  1. Step 1: Using a Chisel, Make the Crack Wider at the Bottom than the Top.
  2. Step 2: Clean Out the Debris with a Stiff Fiber or Wire Brush.
  3. Step 3: Fill the Crack with Patching Mix (also know as Vinyl Concrete)
  4. Step 4: Address Any Pop-Outs.
  5. Step 5: Wet the Surface and Apply a Concrete Bonding Agent.

Yguanira Hillbich

Teacher

How do you fix a pitted concrete driveway?

It's a job you can do yourself, and for a lot less than what a new driveway costs.
  1. Power Wash. First, power wash the entire surface.
  2. Fill Cracks and Holes. Fill all cracks and large holes with concrete patch or the material you're using to resurface the driveway.
  3. Use Expansion Cracks as Guides.
  4. Mix and Apply Resurfacer.

Elhadji Madolell

Reviewer

Should I resurface or replace my asphalt driveway?

In addition, the older your driveway is, the more likely it is to need replacement. Driveways are exposed to massive forces every day, and over time, the stresses eventually take their toll. Repairing or resurfacing an asphalt driveway that is more than 20 or so years old will provide, at best, a temporary fix.

Mihaila Bernhards

Reviewer

What is the cheapest way to pave a driveway?

Cheap Ways to Pave a Driveway
  1. Rustic Gravel. Gravel is one of the most inexpensive paving options for a driveway.
  2. Durable Apshalt. Asphalt is usually quite affordable.
  3. Elegant Tar and Chip. A tar and chip driveway is an affordable driveway paving option that often has a more decorative appearance than plain asphalt.
  4. Low-Maintenance Concrete.

Kateryna Zschirnt

Reviewer

Can you put new asphalt over old asphalt?

Asphalt Resurface (over Asphalt):
A #404 surface course of asphalt can be installed on top of existing asphalt. Putting new asphalt on top of existing problems won't make them go away. The time to correct them is before you install the new asphalt.

Lindalva Ponkratov

Reviewer

How much does a dump truck load of asphalt cost?

A concrete driveway 90 feet long and ten feet wide would be around $1800 for materials plus an additional $2000 or so for labor, for a total cost of nearly $4000. Asphalt driveway paving costs $2-$6 per square foot installed. For a 500 square foot (50 x 10) driveway this works out to an average cost of $2500.

Carey Kolodziejeza

Supporter

How can I make my own driveway?

Part 2 Preparing the Driveway for Concrete
  1. Lay out the shape of your driveway with stakes.
  2. Install the forms for your driveway.
  3. Use fill material to make sure your base is thick enough.
  4. Compact the fill material and soil with a plate compactor.
  5. Add reinforcing steel to the concrete if you choose.