Asked by: Carmiña Meiners
automotive auto parts

How much does it cost to replace a suspension joint?

43
The ball joint is a small part of your car, and the part itself is only going to cost between $20-$150 or more, depending on where you get it from and what kind of vehicle you own. It can take a little over an hour to get it replaced, so the full ball joint replacement cost will be between $100 and $400.


Also know, how much does it cost to fix a suspension joint?

The average cost for a suspension ball joint replacement is between $361 and $422. Labor costs are estimated between $228 and $289 while parts are priced at $133. Estimate does not include taxes and fees.

One may also ask, can you replace ball joints yourself? DIY Vehicle Ball Joint Replacement. Ball joint replacement is a common mechanical issue that needs to be fixed. Ball joints can become worn down and need to be replaced when they become worn. You can save some money by doing it yourself instead of going to a mechanic.

Also Know, how much does it cost to replace a ball joint?

Ball joint replacement cost There are many different vehicles on the road today and costs can range from $200 [for one] to just over $1,000 [for all four], including an alignment. Some vehicles have only two lower ball joints and some have four, both upper and lower.

Can you drive a car with a bad ball joint?

By far the worst that can happen, when driving on a bad ball joint, is breakage. The ball joint can break in two ways: the ball detaching from the socket and stud breakage. No matter the form of breakage, the end result is catastrophic. When the ball joint completely breaks, the wheel is free to move in any direction.

Related Question Answers

Edenia Retlich

Professional

Is suspension expensive to fix?

Replacing just the four shock absorbers or struts that are part of the suspension system can cost $200-$1,500 for an average vehicle or $2,000-$5,000 for luxury vehicles or those with difficult access or heavy rust; do-it-yourself costs for replacement of shocks/struts averages $150-$250.

Xueling Keywood

Professional

How long can you drive with a bad ball joint?

short answer is it depends on how bad they are. the lower ball joint typically gets more wear than the upper. i'd say, if there's just a little wiggle in either joint, you should have no problem driving 500 miles.

Theodorus Boeto

Professional

How long does a ball joint replacement take?

The ball joint is a small part of your car, and the part itself is only going to cost between $20-$150 or more, depending on where you get it from and what kind of vehicle you own. It can take a little over an hour to get it replaced, so the full ball joint replacement cost will be between $100 and $400.

Pino Schinkentanz

Explainer

What are signs of a bad ball joint?

Symptoms of a Bad or Failing Ball Joint (Front)
  • Clunking Noises From the Front Suspension. One of the most common symptoms of a problem with suspension ball joints is clunking noises coming from the vehicle's front suspension.
  • Excessive Vibration From the Front of the Vehicle.
  • Uneven Wear on Front Tires.
  • Steering Wheel Wandering to the Left or Right.

Flerida Rabier

Explainer

What does a bad ball joint sound like?

Metallic clunking noise: One of the most noticeable and common symptoms of a bad ball joint is a clunking or knocking noise when the suspension moves up and down. It can sound like a noisy door hinge, a rocking chair or a creaky spring mattress. Vibration: A loose or worn ball joint can cause excessive vibration.

Libby Gonzalez Valle

Explainer

Can suspension be repaired?

The suspension includes wheels and tires, springs and shocks, various linkages and joints, and the steering system. In general, a car with a broken suspension part will need to be repaired or replaced before it can be driven, but the specific consequences vary depending on what part is broken.

Slawomir Mozhaikin

Pundit

How much does it cost to replace ball joints and tie rods?

Most tie rods will cost between $40 and $120 with inner tie rods more expensive than outers. Some cars have tie rods sold as an assembly where inner and outer tie rods are sold together as an “assembly”. Labor to replace tie rods will run between $45 and $85 depending if the inner or outer tie rod is changed.

Sukhjit Stratman

Pundit

How do you know if you need new tie rods?

Common signs of a faulty tie rod end include a front end alignment that is off, a shaky or loose steering wheel, and uneven or excessive tire wear.

Elfrieda Sistere

Pundit

What happens if your ball joint goes out while driving?

A broken ball joint may be the cause of a mysterious clunking noise or drifting steering. And once they're worn, they will seriously affect your steering and suspension. If a ball joint fails completely, it can even result in the wheel dramatically falling off the car.

Denver Unali

Pundit

Do you need an alignment after replacing ball joints?

No, you certainly don't need alignment after ball joints, unless your previous alignment was done when ball joints were bad and loose. If your car is driving sloppy after ball joints replacement, check other suspension parts. You stiffened up the ball joints, now the weak link is somewhere else.

Shafqat Wurmsee

Pundit

Should ball joints be replaced in pairs?

Do ball joints have to be replaced in pairs? No, it's not necessary, however, often when one ball joint is bad the other could be worn out too. In pickup trucks with double-arm front suspension, the upper and lower ball joints on one side are often replaced at the same time if the labor overlaps.

Acelia Coumans

Teacher

Is a bad ball joint dangerous?

Dangers of worn ball joints
A worn ball joint is not a problem that should be put off—a catastrophic failure of any ball joint will result in your front suspension coming apart and causing loss of control of your vehicle.

Zohair Mollar

Teacher

Can you replace ball joint without replacing control arm?

Some ball joints can be replaced independently of the control arm, but not an easy DIY (need a press to get the ball joint out)! If this is going to be a DIY, change the entire control arm.

Massar Bateman

Teacher

How do you fix a ball joint?

Part 1 Getting Started
  1. Prep the work area.
  2. Inspect the ball joints to make sure they need to be replaced.
  3. Purchase the correct replacement ball joint assembly for your vehicle.
  4. Remove the wheel and access the ball joint.
  5. Soak all the bolts with WD-40 or PB Blaster.

Anatalia Yagubov

Teacher

How expensive is it to replace a tie rod?

For a tie rod replacement, you will generally pay around $70 to $200 for parts and labor. Here's the breakdown for you. The tie rods don't take long to replace, so labor is only going to run you between $30 to $100 for most cars.

Catiana Dean

Reviewer

What does a ball joint look like?

Before we go any further, let's take a quick look at what a ball joint is. A ball joint is usually a ball-in socket design, lubricated with grease and covered with a dust boot. The lower ball joints are usually larger and wear out faster due to the weight of the front of car that rests on them.

Veska Logarinho

Reviewer

Ignat Kleinmair

Reviewer

Are ball joints hard to replace?

From that standpoint, yes, it is hard to replace ball joints - more than basic DIYr skills and tools are required. There is also the safety dimension for being in close proximity to a suspended vehicle, and a compressed spring that has enough force to cause serious harm if it comes loose.

Nahomi Wolfseher

Reviewer

Should I replace upper and lower ball joints at the same time?

If you change the ball joints due to wear on one side of the vehicle, then the other side will likely go bad in a short time. I would recommend replacing both sides at the same time so only one alignment needs to be done and you have the peace of mind that your front ball joints will be good for a long time.