Asked by: Elmahdi Berardi
home and garden home appliances

How much does slate countertop cost?

16
Complete Guide to Slate Countertops. The average cost of installing slate countertops depends on whether you're buying slab or tiles. After installation, slabs cost around $77 to $100 per square foot. Tiles cost around $50 to $65 per square foot.


Regarding this, is Slate cheaper than granite?

More affordable than granite and marble, slate can also cost less than most quartz, concrete or crushed glass countertops, running around $50 to $65 per square foot. While slate has a lot to recommend it as a countertop material, it can be sharp around the edges and is not as tough as marble and granite.

Furthermore, what is the least expensive type of countertop? Finding a beautiful, inexpensive option comes down to your choice of countertop material which can range from $20 to $200 per square foot.

Cheap Countertop Options per Square Foot*
Ceramic Tile $5-$30
Natural Stone/Granite Tile $10-$30
Vinyl Laminate/Formica $25-$50
Corian $35-$65
Solid Surface $35-$70

Correspondingly, is slate countertop expensive?

Unlike granite, marble and concrete, slate is non-porous. They cost less than most concrete, quartz or crushed glass countertops too. Slate countertop prices are $50-$65 per square foot.

Which is stronger slate or granite?

Properties of rock is another aspect for Granite vs Slate. The hardness of Granite is 6-7 and that of Slate is 3-4. Granite is heat resistant, wear resistant whereas Slate is heat resistant, impact resistant, pressure resistant, wear resistant.

Related Question Answers

Arsilia Jacque

Professional

Can you put hot pans on slate?

Slate and Heat
Slate itself is fireproof, but thin pieces of slate may shatter or fall apart if placed in a fire or hot oven while the stone is cool. Most slate is stain-resistant as well, so a hot pot will not leave behind a burn mark on a slate hearth, countertop or table.

Mamudu Tel

Professional

Does slate break easily?

While granite and marble tend to shatter when you break them, if you take a few precautions with slate, you can break it into roughly the size you want without fear of fracturing the stone. Slate can be cut or broken up into smaller pieces for use anywhere.

Slimane Lebedkin

Professional

Do slate countertops stain?

Slate counters are naturally stain-resistant. Also, they're completely non-porous, which makes them exceptionally anti-bacterial and mold-resistant.

Zuria Naylor

Explainer

How much is a slab of slate?

The average cost to install slate countertops starts at $60/sf, including labor and materials, but the price can run as high as $200/sf installed. Slate typically costs between $2,600 and $3,600 for a 54sf surface.

Lakeisha Ylardia

Explainer

What is the best countertop for your money?

Bang-For-Your-Buck Kitchen Countertop Materials
  1. Quartz. Quartz has become popular with thanks to its durability and low maintenance.
  2. Granite.
  3. Marble.
  4. Laminate.
  5. Solid Surfacing.
  6. Slate.
  7. Recycled Glass.
  8. Wooden Butcher Block.

Ivete Duerre

Explainer

Is slate a good flooring option?

Durability: One of the strongest standard natural stone flooring materials, slate has an inherent durability that makes it resistant to cracks, scratches, breaks, and chips. This uniqueness can make slate a good choice for highly visible areas, such as entryways or large kitchens.

Mekki Cobaleda

Pundit

How do you care for Slate countertops?

Minimal care and cleaning requires little time but keeps the slate countertop in top condition.
  1. Wipe down the counter after each use with a damp, clean rag.
  2. Combine 2 teaspoons of mild liquid dishwashing soap with 2 cups of water in a spray bottle.
  3. Spray down the slate at least once a week with the countertop cleaner.

Hayate Z'fansky

Pundit

How do you cut slate?

Buy or rent an angle grinder or circular saw to cut through thick slate. Angle grinders and circular saws are suited to cut slate. Make sure to use a carbide or diamond tipped blade because slate will dull weaker blades. Also, your cutter wheel should be as thin and fine as possible, which will reduce spalling.

Ronald Touriño

Pundit

How do you clean unsealed slate?

How to Clean Unsealed Slate Tile Floors
  1. Sweep the floor to remove crumbs or small pieces of debris that could scrape or chip the floor when you begin mopping.
  2. Use a dust mop after you use a regular broom.
  3. Prepare a cleaning solution of warm water mixed with a small amount of gentle laundry detergent.

Iberia Kalisz

Pundit

How do you polish slate countertops?

To polish slate, start by wetting it thoroughly, which will help prevent scratches while you're buffing it. Then, gently buff the slate using 200-grit sandpaper until the scratches are less visible. Next, rinse the slate off with water and repeat the process, this time using 400-grit sandpaper.

Laxmi Wais

Pundit

What is the best kitchen countertop?

#1 Quartz Kitchen Countertop ($40 to $100 per square foot)
The durability winner is quartz, the man-nature combo countertop. Crushed quartz stone is mixed with resin to produce countertops that range from solid colors to the look of real granite, but they'll beat natural stone in toughness.

Chafika Gerke

Teacher

What is the difference between slate and soapstone?

Soapstone and slate are both non-porous, so they won't need sealing, but soapstone is soft and may show knife marks, while slate can be brittle, especially at corners. Both come in fewer colors.

Luana Cardung

Teacher

How do you clean black slate?

For Regular Cleaning:
  1. First make sure to sweep, dust, or dry mop the surface to remove any loose dirt.
  2. Mix a few drops of mild dish detergent in a couple of cups of warm water.
  3. Use a soft rag (or mop) soaked in the soap solution to rub off dirt and grime.

Nessrine Calpis

Teacher

What is the most durable countertop?

The Top 5 Most Durable Countertops
  1. Granite. Although natural granite remains one of today's most popular countertop choices, it may have met its match with the growing popularity of engineered granite.
  2. Quartz. Quartz countertops are a top contender when it comes to both durability and beauty.
  3. Recycled Glass.
  4. Concrete.
  5. Solid Surface.

Babucarr Esurola

Teacher

Are slate worktops any good?

Slate is naturally non-porous, making it a great material for surfaces where liquids may be spilled. Slate worktops are easily wiped and won't stain easily. Slate is extremely durable and hardwearing. It's a material that is easy to maintain.

Lassana Englschalk

Reviewer

Is Slate porous or nonporous?

Like granite, slate is durable and impervious to heat. It is fire resistant and you don't need to worry about burning or charring your slate fire hearths. It is a fine grained and non porous natural stone, it won't absorb water and liquids.

Gabino Zaugg

Reviewer

How do you clean a slate shower?

  1. Remove any moisture from the slate tile shower walls with a clean bath towel.
  2. Mix the stone cleaner with hot tap water.
  3. Spray the cleaner generously over the slate tile.
  4. Dry the tile with a clean cloth to reduce water marks on the slate surface.

Antionette Lohwasser

Reviewer

How can I redo my kitchen countertops cheap?

Here are a few less expensive ways to update old counters.
  1. Give It a New Look with Paint.
  2. Skim-Coat Your Counters for a Faux Concrete Look.
  3. Make Your Own Solid Concrete Counters.
  4. Create Tile Countertops.
  5. Install Butcher Block.

Xuefang Shukla

Reviewer

How can I save money on countertops?

Save on granite countertops by choosing a standard edge treatment and midpriced stone.

7 tips to save on granite countertops
  1. Shop around.
  2. Buy the sink and faucet separately.
  3. Use a remnant.
  4. Go prefab.
  5. Get a line-item breakdown.
  6. Use granite tile.
  7. Have the installer do final measurements.

Co-Authored By:

EveryThingWhat Staff Editor

3

10th January, 2020

56

94% of readers found this page helpful.

4.5/5

Click a star to add your vote

Similar Asks
Trending