Asked by: Celma Ayestaran
style and fashion mens outerwear

Is it easy to install pocket doors?

Last Updated: 18th April, 2020

11
That's a common problem with old doors and with modern ones that have an inferior suspension design. If you have simple tools, you can install the pocket door frame and hardware with little difficulty. Installing the door into the pocket is also fairly easy to do.

Click to see full answer.

Correspondingly, are pocket doors expensive to install?

Pocket Doors Cost During a new construction, pocket doors will cost between $500 and $1,000. As part of a remodeling project, their cost will be in the $1,000 to $3,500 range. These prices reflect both parts and labor. These doors hide inside a wall cavity instead of swinging out from a hinge.

Likewise, can you make any door a pocket door? As long as the measurement is correct for the pocket opening, the door is the right thickness, and the door hasn't been pre-drilled for a standard door lockset or hinges, you can use any kind of door for a pocket door.

Accordingly, how hard is it to install a pocket door in an existing wall?

To install a pocket door, start by removing the existing door and the drywall on one side of the wall. Then cut the exposed studs to make room for the new framing. Next, install the slider track using the rails that came in your pocket door kit. Be sure to screw the brackets into the studs!

Are pocket doors out of style?

Pocket doors are not a common door type found in homes today but have actually been around for centuries. In the past, the door type was actually considered a standard feature in an upscale home but this gradually went out of style. Swinging doors became the new 'It' feature and homes continue to use such doors today.

Related Question Answers

Adrian Saftenberger

Professional

Are pocket doors reliable?

The Pros and Cons of Pocket Doors. These doors are mounted on tracks and roll in and out of a “pocket,” or hollow compartment in the wall, so they don't take up space in the room. They're not the most reliable doors around, though, and the noise some models make can be an annoyance.

Cristiane Krulle

Professional

Do pocket doors require thicker walls?

(Note: It's OK if this sleeve intersects with another wall, but you might need special hardware to reinforce that juncture if a supportive stud needs to be removed.) The wall should also be thicker than four inches, as the standard door thickness is about two inches.

Guasimara Rodriguez

Explainer

Are pocket doors good for bathrooms?

The pocket door is an ideal solution for a tight bathroom where the wall space simply isn't there to accommodate a full swinging door. In addition to bathrooms, they're good for closets or as connections between the two areas. Pocket doors can help to regulate access to the outdoors in a breathtaking manner.

Yasunari Hortc

Explainer

Can you install a pocket door without removing drywall?

To install a pocket door in an existing wall, you have to remove drywall, and it's easier to uncover the entire wall instead of trying to work in a limited opening. That way, you can remove entire studs instead of cutting them and reroute wires as needed.

Boukhayar Schimmelpenninck

Explainer

Do pocket doors have a bottom track?

Most pocket doors have two hangers and two sets of rollers at the top of the door. The rollers allow the door to follow a metal track when the door opens and closes. The bottom of the door is another matter. There is nothing that keeps the bottom of the door in place, other than the pocket itself.

Robson Pels

Pundit

What is the best pocket door hardware?

Best Pocket Door Hardware Reviews 2019
  • Best Ball Bearing Hanger - Johnson Hardware 1125.
  • Best Pocket Door Track - Hartford Building Products HBP-S1.
  • Best Pocket Sliding Door Bolt - Ives by Schlage 42B15.
  • Best Pocket Door Handle And Pull - Prime-Line Products N 7238.
  • Best Pocket Door Edge Pull - Baldwin Estate 0465.150.
  • Best Flush Pull Handle - Tibres - 17.1.

Liping Paul

Pundit

What can I use instead of a pocket door?

Here are 5 modern door alternatives.
  1. Pocket Doors. Pocket doors are a great alternative to ordinary hinge doors because when they're opened they're completely concealed by the wall.
  2. Barn Doors. Barn style sliding doors are also an excellent alternative to hinge doors.
  3. Hidden Doors.
  4. Curtains.
  5. Shoji Sliding Doors.

Zaim Agranowsky

Pundit

Can a pocket door be installed in a 2x4 wall?

The 1500HD Series Pocket Door Frame for 32 in. x 80 in. is an easily assembled, premium quality commercial/residential kit for installing a pocket door into a 2x4 stud wall. Pocket doors do not need "swing" room, saving valuable floor space while still assuring the full privacy of a standard door.

Renea Urquiza

Pundit

Can you put a pocket door in a wall with electrical?

The pocket door literally fits into a pocket inside the wall and typically slides on rollers on a track above the door. One downside to the pocket door is that it often leaves little room for anything else in the wall, such as plumbing or electrical (such as outlets or switches), so careful planning is required.

Bakartxo Zuazola

Teacher

Can a pocket door be installed in a load bearing wall?

Installing a pocket door in a load-bearing wall requires replacing the old header with a longer one. Check to see if the wall contains wiring or plumbing. A wall with pipes isn't a good candidate for a pocket door. If you have attic and basement access, it should be easy to reroute electrical cables.

Lulu Cantudo

Teacher

Can you put a pocket door anywhere?

You can really have a pocket door installed anywhere you like but normally, such doors are placed in areas where they will be of benefit. If the space provided for a door swing is not optimal, a pocket door will free up space in the home.

Soña Orden

Teacher

What is a pocket sliding door?

A pocket door is a sliding door that, when fully open, disappears into a compartment in the adjacent wall. Pocket doors are used for architectural effect, or when there is no room for the swing of a hinged door.

Delinda Bierfreund

Reviewer

How much does it cost to put a door in a wall?

On average, door installation costs $960, with most homeowners spending between $472 and $1,457. This data is based on actual project costs as reported by HomeAdvisor members. Replacing interior types in an existing frame runs anywhere from $100 to $1,000 .

Stefany Hedvah

Reviewer

How do you make a sliding door into a regular door?

So, if you're asking yourself how to make a regular door into a sliding door, look no further.
  1. Step 1: Remove the trim.
  2. Step 2: Measure the top and install the railing system.
  3. Step 3: Trim any added door length.
  4. Step 4: Install door hardware.
  5. Step 5: Check to ensure it's level.

Rosanne Ardura

Reviewer

Should pocket doors be solid or hollow?

Almost all types of doors may be hung as pocket doors, rather than installed as swinging doors. Solid doors are heavier and thus more challenging to the hardware. However, hardware tends to pull out of hollow-cored composite doors over time. Use pocket doors in 2 x 6" walls, rather than in 2 x 4" walls, if possible.

Ederne Pose

Reviewer

Can you replace pocket doors?

The solution to some of these problems is to install a new track and sliding door hardware. Step one is to take out the door and remove the existing hardware. You know, a pocket door is aptly named because the door actually does slide into a pocket in the wall. There are no studs in here, no conventional framing.

Lautaro Isserles

Supporter

What are standard pocket door sizes?

Standard door widths range from 24 inches to 32 inches. Double the width of the desired door, or pair of doors, to determine the wall space that's needed to install the pocket door frame. For example, 48 inches is needed to install the frame for a 24-inch door.

Krystian Regensberg

Supporter

Can you use a hollow core door for a pocket door?

Most hardware will hold 1 3/8- inch-thick hollow-core doors weighing up to about 75 pounds. You can buy a pocket door frame with heavy-duty hardware that will support 1 3/4-inch-thick solid-hardwood doors weighing up to 175 pounds. In fact, you can even buy hardware that will hold very heavy glass doors.

Deogracias Montoliu

Supporter

What are the types of doors?

Interior Doors. The hinged single door is the most common interior door type. The room design must allow space for hinged doors to swing. Interior doors typically are lightweight and have two hinges; exterior doors are heavy and often use three hinges.