Asked by: Leena Dobrynin
shopping couponing

What does the orange light mean on my directv box?

43
YELLOWISH ORANGE means that there is a problem. You might not notice it at first but eventually you might see a blocky picture, or the client might not respond to the remote.


Moreover, what does the blue light on my DVR mean?

The blue light indicates that you have HD.

Beside above, what does it mean when directv says no servers were detected? Restart your Genie HD DVR by pressing the Reset button located inside the access-card door on the right-front panel. If you still see the No Servers Detected message on all the Genie Minis, your Genie HD DVR cables may be loose. Make sure all connections between your Genie HD DVR and the wall outlet are secure.

One may also ask, how do I reset my directv receiver?

Press the reset button:

  1. On some DIRECTV receivers there is a red reset button located inside the access card door on the front panel.
  2. Unplug your receiver's power cord from the electrical outlet, wait for 15 seconds, and plug it back in.
  3. Press the Power button on the front panel of your receiver.

Why is there a yellow light on my directv box?

The yellow light on the client means “reduced connectivity.” It means that the client isn't getting as strong of a signal as it could. Now, if you're not seeing any problems, then there aren't any problems.

Related Question Answers

Saundra Rigoni

Professional

What does blue light on TiVo box mean?

Recording lights - These lights indicate that recordings are in progress. If one light is lit red, one recording is in progress; if two are red, two recordings are in progress; if three are red, three recordings are in progress. Blue light – not in use.

Johanne Urrejolaveitia

Professional

What does the red circle on TiVo mean?

Note: You may notice a red circle next to programs scheduled to record in the Guide depending on your SW version, view of the Guide and your TiVo. These red circles are for future recordings; the red light on the front of the TiVo will not be on. URL Name.

Christiam Fahim

Professional

Why is my Comcast box light blue?

On the screen go to "Xfinity / Settings / Device settings / Power preferences / Power saver" (turn it on). After the TV is turned off, the cable box will turn itself off after a while, and will stay off until the TV is turned on again. After the first cycle, the blue light stays solid, no more flashing.

Ambros Haiter

Explainer

How do I turn off the blue light on my Comcast cable box?

Re: Blue LED Light
You can turn the blue light back on. On your remote press Xfinity>Settings>Device Settings>Device Lights. When functioning properly, an X1 DVR should be whisper silent.

Rayner Piotrowsk

Explainer

Why is the blue light flashing on my Swann DVR?

The blinking blue light indicates that your camera has already acquired the router information, but the network is poor.

Calin Luib

Explainer

How do I cancel my Direct TV?

How to Cancel DirecTV in 5 Steps
  1. Call Retention at 1-800-288-2020.
  2. Prepare Your Excuse (like moving abroad)
  3. Stay Firm, Be Friendly, and Avoid Fees.
  4. Return all your DirecTV Equipment.
  5. Call Back and Confirm The Cancellation.

Haruna Forment

Pundit

Why is the green light flashing on my TiVo box?

This light flashes green when the Hub's downloading a software update. This flashes during set up, and then stays green for 2 minutes when you're done. It isn't on during normal use, but turns red if there is a problem.

Algimantas Esenkov

Pundit

How do I reset my satellite receiver?

To reset your receiver to the factory default settings:
  1. Press MENU on your remote control.
  2. Select System Setup.
  3. Select Factory Defaults.
  4. A pop-up message will appear to confirm that you want to reset your receiver to the factory default settings.
  5. Select Yes.

Ramata Agirre

Pundit

How do I reboot my directv box?

Method 2: Unplug your receiver
  1. Unplug your receiver's power cord from the electrical outlet, wait 15 seconds, and plug it back in.
  2. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.

Mileydis Aird

Pundit

What does Error 771 on directv mean?

If you see error code 771, it means your DIRECTV receiver is having trouble communicating with your satellite dish. Watch this video to see how to solve this error.

Shania Orejana

Teacher

How do I reconnect my mini genie?

Connect the Wireless Genie Mini to the non-DIRECTV ready TV.
  1. Connect the Wireless Genie Mini client to your TV using an HDMI cable.
  2. Set the TV to the input being used.
  3. Plug the power cord of the Wireless Genie Mini and the TV to a working outlet or a power surge protector.
  4. Power on the TV and the Wireless Genie Mini.

Escolastica Essid

Teacher

Why is my directv box not working?

If your receiver doesn't turn on, there might be a problem with the receiver's power supply. Unplug the end of the power cord from the back of your receiver and plug it back in. Make sure it's securely connected. Unplug the other end of your receiver's power cord from the electrical outlet and plug it back in.

Azize Ukhin

Supporter

What does select a server mean?

So when it says "select a server" it means they are not communicating with the Genie.

Suhar Lindschulte

Beginner

How do you refresh your service on directv?

Refresh your DIRECTV equipment
  1. Go to Account overview and select My DIRECTV.
  2. Choose Manage my plan then Manage and learn about equipment.
  3. Select Refresh receiver.
  4. Wait 5 minutes. Your DIRECTV service may be interrupted during the refresh process.

Gevorg Wellems

Beginner

Why is my DirecTV box flashing?

Though it's not always the case, flashing lights can be a sign of serious problems with your DirecTV receiver. A number of different issues -- ranging from disconnected power to a bad hard drive -- can cause the blue power light to flash. Troubleshooting may help to diagnose simple causes.

Atreyu Millet

Beginner

What does data light mean on Xfinity box?

Re: cable box yellow data light stays on
If it's a Pace RNG110 box, that means there is a on screen message waiting from Comcast. To clear your message, press "menu" "menu" "messages" and read and clear the messages.

Co-Authored By:

EveryThingWhat Staff Editor

7

29th March, 2021

4,730

95% of readers found this page helpful.

4.7/5

Click a star to add your vote

Similar Asks
Trending