Asked by: Arcilia Heitz
video gaming console games

What is a GameBit screwdriver?

Last Updated: 2nd June, 2020

12
Quick Overview: The RepairBox 4.5mm GameBitScrewdriver is the perfect tool for opening game consoles andcartridges. Compatible with any screwdriver or drill thataccepts bits. 4.5mm GameBit Screwdriver opens consoles suchas SNES, N64, GameCube ®, Virtual Boy, Game Gear, TurboDuo,GameGear, and TurboGrafx 16.

Click to see full answer.

Similarly, what screwdriver do I need to open a NES cartridge?

To open a NES cartridge you need a 3.8mmgamebit screwdriver and a NES cartridge. If thescrewdriver is a similar size to my one you will need to puta lot of pressure down on the screw to turn them. When you haveremoved the shell of the Nes game you can do clean it so itis fit to sell or what ever you want.

Subsequently, question is, how do you open a tri wing screw? How to Remove Tri-Wing Screws

  1. Purchase a tri-wing screwdriver from a electronics repair shopor online.
  2. Unplug your game set and turn it upside down over a towel.
  3. Press down slightly on the screw with the screwdriver and turncounterclockwise.
  4. Loosen all the tri-wing screws on the game case until all theydo is spin.

Similarly one may ask, what screwdriver do I need to open a n64?

Bit will fit any standard 1/4" screwdriverhandle. The 4.5mm security bit allows you to open SegaGenesis, Sega Master System, and Sega 32X games. The 4.5mm securitybit allows you to open Super Nintendo, Nintendo 64, GameCube, Virtual Boy, Game Gear, TurboGrafx 16, and TurboDuo systems(video game consoles).

How do you clean NES games?

Steps

  1. Sort through your cartridges.
  2. Learn how to remove the screws.
  3. Dust each cartridge with an air blower.
  4. Pour a small amount of window cleaner/rubbing alcohol into asmall cup.
  5. Dip the Q-Tip into the window cleaner/rubbing alcohol that youpoured earlier.
  6. On the bottom of the NES game are metal contacts.

Related Question Answers

Tonya Palou

Professional

How do you unscrew a screw without a screwdriver?

To unscrew a screw without a screwdriver, use abutter knife, coin, credit card, or the tab from a soda can totwist the screw counterclockwise. You can also grip thescrew with a pair of pliers and try unscrewing itthat way. If it's a tiny screw, use the tip of a knife or apair of tweezers to unscrew it.

Abdoulie Alpera

Professional

Is it bad to clean NES games with alcohol?

Nintendo Repair Shop repair tech here. Whileusing rubbing alcohol won't hurt your games (unlessyou absolutely douse them in it), using alcohol and a qtipis really not an effective cleaning method. You can usealcohol and a cotton swab to clean the contacts, butNEVER use a pencil eraser.

Abbie Signorelli

Professional

How do you take apart a Nintendo 64 cartridge?

Step 1 Cartridge
  1. First flip your game over and you'll see two screws using the3.8mm "Gamebit" screwdriver bit.
  2. Take the screws out and peel the case off starting from the toptaking care not to force it due to the tabs at the bottom of thecartridge.
  3. The two halves of the case should come apart easily.

Crecencio Arsky

Explainer

Does Home Depot sell Tri wing screwdrivers?

Tri Wing Screwdrivers
Although, it might be possible to take apart theMacbook Pro with a set like this. I wish I could tell you that youcould head over to Home Depot to get a Nintendoscrewdriver but you can't. Lucky for you we sell alow priced screwdriver that is designed to take apartNintendo's stuff.

Ilyas Amarillo

Explainer

What do you do when a screw won't turn?

Steps
  1. Switch screwdrivers. When a screw is stripped, attempt toremove it with a different screwdriver.
  2. Tap the screwdriver into the head with a hammer. Place yourscrewdriver into the head.
  3. Remove the screw with a pair of pliers.
  4. Drill a small hole into the head with an electric drill.
  5. Use a Dremel.

Mayme De Brito

Explainer

What is a tri wing screwdriver?

It is sometimes called a triangular slotted screw. It isused as a tamper-resistant screw on various products, typicallyelectronics. The Tri-Wing is a tamper-resistant screwdue to the rarity of Tri-Wing screwdrivers in anystores, although they can be legally bought online.

Gela Eschbach

Pundit

How do you remove a stripped screw?

Try throwing a little back into your screw twists, and ifthat fails, try these stripped screw removal tips from the DIYexperts at Stack Exchange.
  1. Drill Into the Screw.
  2. Use a Rubber Band.
  3. Cut a Notch in the Screw Head.
  4. Try Pro Grabit.
  5. Use Pliers.

Zaza Virachev

Pundit

What is the smallest Torx size?

TORX Point to Point Approximate Dimensions
T-Size Inch Metric
T3 .046 1.17mm
T4 .050 1.28mm
T5 .055" 1.42 mm

Solana Happach

Pundit

Who invented Torx?

The hexagon key was first patented in 1909 by William G.Allen (US Patent 960244), but some evidence suggests the idea of ahex turning tool may have been thought of as early as the1860s.

Marg Muguerza

Pundit

What screwdriver do I need to open iPhone 7?

You need a pentalobe screwdriver (PL1) toopen the iPhone 7. Remove the two pentalobe screws atthe bottom of the enclosure. They're to the right and left of theLightning connector.

Weiyong Meakin

Teacher

How many pentalobe screws are found in the iPhone 7?

Remove the two 3.4 mm pentalobe screws at thebottom edge of the iPhone. Opening the iPhone'sdisplay will compromise its waterproof seals.

Francene Dudea

Teacher

How do you clean a NES 72 pin connector?

Once the pins are bent back into place, you mayattempt cleaning 72pin connector. Submerge the 72pinin rubbing alcohol or simply add a few drop inside theconnector. Find a clean NES game and insert the gameseveral times. To reassemble your device, follow these instructionsin reverse order.

Zoumana Scheifel

Reviewer

How do I get my old Nintendo to work on my new TV?

After the system is connected to the TV:
  1. Insert the Game Pak firmly into the Control Deck.
  2. Plug the Controller(s) into the front of the system.
  3. Plug the AC Adapter into the back of the system .
  4. Press the Power button in on the front of the NES.
  5. Turn on the TV and locate the input select.