Asked by: Graça Reichert
home and garden home appliances

What is f11 error code on Frigidaire stove?

13
This is an interesting one the customer was getting an F11 error code on the display on the control board. If you're not already familiar with that error code it means that the control board is sensing a stuck or shorted key on the touch membrane.


In respect to this, how do I fix f11 error on Frigidaire?

The constant beeping and the F11 are caused by a shorted touch pad. You can try and push other touch pads to clear this error. You can remove power to the oven for 2 minutes and turn the power back on and see if the problem has cleared.

Similarly, how do I fix f1 error on Frigidaire oven? When an F1 error occurs, the display flashes the code and beeps at the same time. To stop the flashing and beeping, press the "Cancel" button. Try the bake or broil feature once more, and if the error code repeats, unplug the appliance and wait five minutes before plugging it back in.

Also Know, what is f11 error code?

Resolution: Error code F11 = Serial Communication Error. Error codes can be caused by a Power Surge or other electrical anomaly,attempt to return the washer to operation by following the Hard Reset procedure below. In some cases the control can be non-functioning or may not accept activation from the control panel.

What does f11 mean on oven?

The "F11" fault code indicates a Shorted Keypad. Disconnect power to the range, For 10-20 minutes and reapply power. If "F11" returns upon power-up, replace the Electronic Oven Control (EOC).

Related Question Answers

Libia Chamica

Professional

How do I fix error code f90?

The F90 is the door lock code. this can be precluded by a self cleaning cycle:-) Try to unplug the range, wait 1 minute. Turn the range back on, while holding in on the oven door, start another self clean. Wait 2 minutes and then cancel the self clean.

Nayara Dowson

Professional

How do I reset my Frigidaire oven?

How to Reset a Frigidaire Oven
  1. Press and hold the "Bake" button for six seconds until "0°" appears in the display.
  2. Enter the lower temperature at which you want to reset the oven.
  3. Press "Self Clean" to reset the oven's internal temperature to a cooler setting.

Hamed Fekete

Professional

Why is my Frigidaire stove beeping f10?

On most Frigidaire ranges, the F10 indicates that the control detects a runaway temperature in the oven. If the oven is overheating, this can be caused by a stuck relay or contact on the oven electronic control board. The sensor is oven connected through violet wires on Frigidaire ranges.

Laurine Bajenin

Explainer

What does f3 mean on Frigidaire oven?

The F3 error code indicates a problem with the oven temperature sensor, the electronic oven control (EOC), or the wiring in between. To test the range someone needs to access the rear of the EOC. The 2 violet wires go from the EOC to the oven temperature sensor.

Lebdaoui Oeljeklaus

Explainer

What does f9 mean on Frigidaire oven?

On Frigidaire stoves, an error code with F9 means that the door on the stove isn't closing properly. This code may come up when something is clogging the latch, the door latch is broken or the switch assembly needs to be replaced. Some owners have found that this error code shows up after they run a self-clean cycle.

Florindo Mohnatkin

Explainer

Why is my Frigidaire stove beeping?

The mini oven control will beep constantly when it detects a fault condition in the temperature sensor/probe circuit. This may be caused by a runaway heat condition, open or shorted temperature sensor/probe, or faulty sensor/probe connection or harness.

Milagritos Sewerin

Pundit

Why is my stove beeping?

When the oven beeps, it is to alert the user that the food is complete. If the temperature alert beep continues after the oven has been turned off, it may indicate a problem with the control panel or temperature gauge.

Sherezade Eggerz

Pundit

What does f11 mean on Kenmore stove?

The "F11" fault code indicates a Shorted Keypad. Disconnect power to the range, For 10-20 minutes and reapply power. If "F11" returns upon power-up, replace the Electronic Oven Control (EOC).

Soumaya Lannoy

Pundit

What does f1 mean on a Whirlpool washer?

The F1 error code on this model of Whirlpool Cabrio washer indicates that the machine control board is sensing a pressure transducer signal (water level pressure sensor signal) that is out of range.

Estelle Apsley

Pundit

What does f11 mean on my boiler?

An F11 is a main board connection fault, which is possible between the main board and the user interface. “Central Heating system has just been drained down due to replacing of a radiator, when the central heating was filled up, it was then ok for a while. Please check how to get an airlock out of the central heating.

Eriz Gonzalez Aleja

Teacher

What does f11 mean on a Maytag washer?

The F11 code means there is an electrical with the Maytag Epic washer. This could involve wiring, fuses or a number of other issues.

Sherri Backhus

Teacher

What does an f1 error on a Frigidaire oven mean?

The F1 error code on this model of Frigidaire range indicates that the electronic oven control board detects one of the following errors: Failed oven temperature sensor probe. Shorted keypad. Internal electronic control board error caused by a power glitch or surge through the electrical lines.

Gino Zhumenko

Teacher

What does f1 mean on your stove?

The "F1" fault code indicates one of the following possible failures: Shorted keypad which is part of the Electronic Oven Control (EOC) Failed Electronic Oven Control (EOC) Oven temperature sensor is bad (this is located inside the oven cavity at the upper left rear corner).

Louhou Yashodhara

Reviewer

Why does my oven beep and say f1?

Generally speaking "F1" implies an electronic oven control (EOC) failure, however it's possible to have a bad oven temperature sensor probe (RTD sensor) causing the "F1". The oven sensor connection can be accessed at the back of the range.

Alene Fockel

Reviewer

What do you do when your oven says f1?

On some models it is possible that F1 could also be caused by a keypad problem. In this case it will specify in the tech sheet to power down the oven, disconnect the keypad then power the oven back on, wait for a few minutes to see if the error reappears. If the error reappears it is definitely the control board.

Rquia Tulnikov

Reviewer

How do I get my stove to stop beeping?

You can turn the continuous beeping off but you may still need to troubleshoot the issue that is causing the beeping noise.
  1. Locate and push the "Bake" and "Broil HI/LO" buttons simultaneously and hold them down for three seconds.
  2. Push the "Kitchen Timer On/Off" button on the GE oven's control panel.

Yali Merchan

Supporter

What does f1 mean on a GE oven?

F1. This code usually means that there is a problem with the keypanel. Many times, it means the keypanel needs to be replaced. F2 or F20. For an unknown reason, the oven temperature has exceeded a preset threshold.

Nabiha Larrañategui

Supporter

What does fi mean on oven?

The "F1" fault code generally implies an electronic oven control (EOC) failure. Disconnect the power, wait 30 seconds or longer and then reapply power. If "F1" returns upon power-up, replace the electronic oven control.

Bubacar Harhoff

Beginner

How do I unlock my Frigidaire oven?

Unlock a Frigidaire oven door by pressing the Clear/Off button until the lock feature disengages, allowing the door to be opened. Re-engage the lock by pressing the same button. Before unlocking the door, check the display screen for the words "off" and "lock," and gently pull on the Frigidaire oven's door.

Co-Authored By:

EveryThingWhat Staff Editor

3

12th February, 2020

39

95% of readers found this page helpful.

4.4/5

Click a star to add your vote

Similar Asks
Trending