Asked by: Benabdellah Rapin
hobbies and interests woodworking

What is frame joint?

Last Updated: 21st February, 2020

26
Frame Joints. Whereas case joints join boards end to face, frame joints are primarily concerned with joining end to edge. Many design options are available to allow you to produce strong joints that can overcome the inherent weaknesses of end grain to long grain joints.

Click to see full answer.

Subsequently, one may also ask, what is a carcase joint?

Box or carcase Joints They lock together and are strong even without glue in one direction. Traditionally used for making drawers - holding the drawer front to the sides. Finger or comb joints are similar to dovetails but are not as strong as the y do not lock together.

Furthermore, why are joints used? There are many wood joints available to make, joints are used to build strength into products. The joints below are the joints that are commonly used in schools. A very simple joint but it is also very weak. They tend to be used for making picture frames, corner pieces and nails are often used to strengthen the joint.

Keeping this in view, what are the different types of wood joints?

Let's discuss the more popular joints, so you know which to use for your projects.

  • Butt Joint. The Butt Joint is an easy woodworking joint.
  • Biscuit Joint.
  • Bridle Joint.
  • Dado (joinery)
  • Dovetail Wood Joint.
  • Finger Joint.
  • Lap Wood Joint.
  • Mortise and Tenon Woodworking Joints.

What is a wood joint called?

Joinery is a part of woodworking that involves joining together pieces of wood or lumber, to produce more complex items. Some wood joints employ fasteners, bindings, or adhesives, while others use only wood elements. In British English usage it is distinguished from Carpentry which relates to structural timber work.

Related Question Answers

Geminiano Zschoppe

Professional

How do you make a wood joint?

Basic Woodworking Joints
  1. Dado Joint. You'll see this joint on bookcase shelves.
  2. Dowel Joint. Drill aligning holes in each piece of wood, then glue dowels in place for a tight joint.
  3. Lap Joint.
  4. Miter Joint.
  5. Mortise-and-Tenon Joint.
  6. Through-Dovetail Joint.
  7. Tongue-and-Groove Joint.

Page Nowark

Professional

Where are halving joints used?

Cross halving joints are probably the most simple of joints to mark out and cut. They are used whenever it is necessary to join two pieces of wood that cross over each other. Sometimes these joints can be seen on the strengthening rails of tables and chairs. The animation below is a good example of 'Halved Joint'.

Enos Grauwinkel

Explainer

What is carcase construction?

In carcase construction, boards are joined end to end using dovetails, tongue-and-groove joints, and the like, as in a drawer or hutch. But it's difficult sometimes to know which joint to use. Furniture construction is broken down into two main categories: frame and carcase.

Asceneth Tufnall

Explainer

What is a bridle joint used for?

The corner bridle joint (also known as a slot mortise and tenon) joins two members at their respective ends, forming a corner. This form of the joint is commonly used to house a rail in uprights, such as legs.

Bemba Grozhantsev

Pundit

What is a comb finger joint used for?

The finger joint or comb joint as it is also known is a popular woodworking joints for making boxes and other solid cube shapes. Once cut, the fingers of the joint all interlock with each other to prevent the joint being pulled apart.

Maheen Cadorniga

Pundit

What is a carcass in furniture?

an unfinished framework or skeleton, as of a house or ship. the body of a furniture piece designed for storage, as a chest of drawers or wardrobe, without the drawers, doors, hardware, etc.

Abdelmaoula Taubensee

Pundit

How do you join two pieces of plywood?

A hybrid joint would be another possible method of joining plywood panels together. For this method, edge glue the plywood together, create a shallow bevel along the joint on both sides of the plywood and then reinforce the joint with a layer or two of fiberglass on each side of the joint.

Bob Cale

Pundit

How do I strengthen my Mitre joints?

Strengthening a Miter joint
All you need to make a spline is a jig to hold the box and/or lid at a 45 degree angle. I cut the kerfs for the splines on my table saw using the jig to the left, but it can also be done using a router with a similar jig. Once you've cut the slots you simply glue in a matching spline.

Esmail Vysokov

Pundit

How strong is wood glue?

Glue is manufactured in standard grades from 32–512 grams (1.1–18.1 oz). 192-gram (6.8 oz) strength is the most commonly used for woodworking; 251-gram (8.9 oz) is the highest normally used for instrument building; 135-gram (4.8 oz) is the lowest used for general woodwork.

Verdell Pohilko

Teacher

What is the best corner joint for wood?

A bridle joint can be considered a cousin to mortise-and-tenon and is a strong and attractive wood corner joint for frames. The tenon is one-third of the board's thickness and it slips into the mortise made at the end of a second board to form the rigid corner of a frame.

Liqun Kaced

Teacher

How strong are pocket hole joints?

The superior strength of a pocket hole joint has actually been proven. Independent testing found that a pocket screw joint failed at 707 pounds when subjected to a shear load while a comparable mortise and tenon joint failed at 453 pounds - meaning that the pocket screw joint was approximately 35% stronger.

Samar Stengele

Beginner

How do you cut a lap joint?

To cut half lap joints at the end of 2 boards, let's say to make a frame, follow this method:
  1. Lay one of the workpieces (A) up against the saw blade.
  2. Butt a stop block up to this piece and clamp it down to the crosscut sled.
  3. Remove workpiece A.
  4. Place your spacer up against the stop block.

Co-Authored By:

EveryThingWhat Staff Editor

12

21st February, 2020

24

90% of readers found this page helpful.

4.2/5

Click a star to add your vote

Similar Asks
Trending