Asked by: Carolino Verkerk
hobbies and interests woodworking

What is Honeycombing in wood?

41
Honeycombing – During drying, internal stresses cause various radial and circular cracks to develop in the interior portion of the wood resembling a honeycomb texture. Honeycombing is among the worst of drying defects because it's irreversible and usually cannot be detected by looking at the face of the lumber.


In this manner, what is Honeycombing in timber?

n·ē‚kōm·iŋ] (materials) Internal fiber separation in drying timber. Local roughness and weakening on the face of a concrete wall due to segregation of the concrete, with the result that there is little sand to fill in between the stone aggregate.

Likewise, what are defects and blemishes in wood? Definition: “Those abnormalities/ irregularities/ blemishes which tend to lower the economic value or decorative value wood and also reduces the strength of wood, are known as wood defects”.

Keeping this in view, what are the natural defects in wood?

Most common natural defects are: knots, shakes, cross grain, crookedness, rind galls, burr, and curl.

  1. KNOTS. A knot marks the position of growth of a branch on the tree.
  2. SHAKES. After knots, shakes are more serious and common defects in timber.
  3. CROSS GRAIN.
  4. RINDGALLS etc.
  5. REACTION WOOD.

What are the three categories of timber defects?

There are various types of defects in timber as a construction material. These defects in timber can be due to natural forces, fungi, insects and during seasoning and conversion.

  • Dry Rot in Timber.
  • Wet Rot in Timber.
  • Brown Rot in Timber.
  • White Rot in Timber.
  • Blue Stain in Timber.
  • Heart Rot in Timber.
  • Sap Stain in Timber.

Related Question Answers

Danil Dasari

Professional

What is wood made of chemically?

The chemical composition of wood varies from species to species, but is approximately 50% carbon, 42% oxygen, 6% hydrogen, 1% nitrogen, and 1% other elements (mainly calcium, potassium, sodium, magnesium, iron, and manganese) by weight.

Vassil Fioravanti

Professional

What are the defects of wood?

The following are a list of the most common wood defects.
  • Bow (Bowing) The curvature of a piece of sawn timber in the direction of its length, cf.
  • Boxed Heart.
  • Checks.
  • Compression Fanures.
  • Cup (Cupping)
  • Diamond (Diamonding)
  • Honeycomb.
  • Split (also known as a Shake)

Ixeia Amestoy

Explainer

What is wood defect work?

A defect is simply an abnormality or irregularity found in wood. There are many different types of defects arising from many different causes. For instance, there are natural and acquired defects caused by a broken limb or other injury, insect and fungal attack, or rapid tree growth.

Erling Wain

Explainer

What is timber shake?

(Learn how and when to remove this template message) Shakes are cracks in timber. Arising in cut timber they generally cause a reduction in strength. When found in a log they can result in a significant amount of waste, when a log is converted to lumber.

Xela Sofar

Explainer

What causes dry rot in wood?

Dry rot is wood decay caused by certain species of fungi that digest parts of the wood which give the wood strength and stiffness. It was previously used to describe any decay of cured wood in ships and buildings by a fungus which resulted in a darkly colored deteriorated and cracked condition.

Zhulieta Rodenbrugger

Pundit

What is a check in wood?

A "Check" is a long crack that appears as the sap wood of a timber shrinks around the heart wood over time. Checking is not a structural problem, and usually occurs only on one or two sides of a beam.

Jinmei Viehoff

Pundit

What causes shakes in timber?

Shakes are natural occurring defects in standing trees caused by a lengthwise separation of latewood fibers. Shakes were once thought to be caused by external stress factors such as wind and temperature extremes (often called wind shakes); however, research has found that a bacterium is the true cause of shake.

Nelida Ibern

Pundit

How can we preserve wood?

Steps
  1. Oil whenever the wood feels dry. Outside of industrial uses, rubbing in oil is the most common way to preserve wood.
  2. Clean off dust and dirt.
  3. Select an oil or commercial product.
  4. Gather materials.
  5. Mix in solvent if appropriate.
  6. Rub the oil in slowly.
  7. Wipe up excess oil.
  8. Apply more coats, sanding in between.

Leixuri Besendahl

Pundit

What are the types of defect?

Following are the common types of defects that occur during development:
  • Arithmetic Defects.
  • Logical Defects.
  • Syntax Defects.
  • Multithreading Defects.
  • Interface Defects.
  • Performance Defects.

Nahla Baringo

Pundit

What is the meaning of timber defects?

A Defect is taken to be any irregularity occurring in or on the timber which may lower its strength, durability, utility value or diminish its appearance. Defects may be 'natural' which occur whilst the tree is growing, or 'artificial' as a result of poor conversion, seasoning or handling after felling.

Cheikh Alcalde

Teacher

What are the three types of conversion of timber methods?

There are two main methods of converting timber:
  • Through and through (or Plain or Crown sawn) which produces tangential boards and.
  • Quarter Sawn which produces radial boards.

Crisostoma Lohbrunner

Teacher

What is timber conversion?

Conversion of Timber. Timber conversion is the process of turning a log into a pile of usable planks or boards. When sewing up the log, several things are considered, including the size of the tapper because this determines how the log is cut to get the most out of the resulting timber.

Monssef Asylmuratov

Teacher

What are the common defects of timber?

The Most Common Defects Are:
  • 1) Surface Checking. Surface checking is usually found along the rays of the wood.
  • 2) End Splits. Such splits are very common defects caused by exposed ends drying out to rapidly.
  • 3) Honeycomb Checks.
  • 4) Shakes.
  • 5) Bowing Or Warping.
  • 6) Dead Or Encased Knots.
  • 7) Ingrown Bark.

Sausan Cocero

Teacher

What are the properties of wood?

Wood main physical properties. The main physical properties of wood include: color, luster, texture, macro-structure, odor, moisture, shrinkage, internal stresses, swelling, cracking, warping, density, sound - electro - thermal conductivity. Сolor, shine, texture and macrostructure determine the appearance of wood.

Rommel Fabuel

Reviewer

What problems do knots in wood cause?

Wood knots weaken wood strength. In fact, knots materially affect cracking (known is the US as “checks”; known in the UK as “shakes”), warping, and the ease of working the lumber. They are defects that lower the lumber's value for structural purposes where strength is critical.

Chantelle Mikhalchev

Reviewer

What is a tree burl?

A burl is a tree growth in which the grain has grown in a deformed manner. It is usually found on the trunk, at the base of the tree, and sometimes underground in the form of a rounded outgrowth. It is caused by some kind of stress, such as injury, virus, fungus, insect infestation or mold growth.

Earl Paquete

Reviewer

How long does it take to season firewood?

about six months

Sindia Federschmid

Reviewer

What is a pitch pocket in wood?

Definition of pitch pocket. : a cavity in lumber that contains or has contained resin.

Omkaltoum Swiate

Supporter

How do you fill holes in live edge of wood?

Begin by taping off the area around the holes, voids or knots. Press the edges of the painter's tape down to seal it against the wood. Remove the epoxy from the packaging. (I used Gorilla Glue Epoxy glue that sets up in 5 minutes.)

Co-Authored By:

EveryThingWhat Staff Editor

14

28th March, 2020

33

82% of readers found this page helpful.

5/5

Click a star to add your vote

Similar Asks
Trending