Asked by: Mercedes Urruzola
business and finance mergers and acquisitions

What is needed for a Milestone C decision review?

23
The goal of Milestone C (MS C) is to determine if a program has met all its Exit Criteria of the EMD Phase to proceed into Production and Deployment (PD) Phase. The exit requirements are determined by the MDA and the ACAT level. A few of the common requirements are: Low-Rate Initial Production (LRIP) Determination.


Also know, what Is a Milestone C decision?

Milestone C (MS C) is a Milestone Decision Authority (MDA) led review at the end of the Engineering and Manufacturing Development (EMD) Phase of the Defense Acquisition Process. Its purpose is to make a recommendation or seek approval to enter the Production and Deployment (PD) Phase.

Beside above, why is the acquisition process important? The Importance of Acquisition and Contract Management. Contract managers fulfill an extremely critical role within a business. Not only must they aid the company in acquiring and managing its resources, but they must also ensure that contracts are designed with the company's best interests in mind.

Subsequently, question is, who is the milestone decision authority?

The Milestone Decision Authority (MDA) is the overall executive sponsor responsible of any Major Defense Acquisition Program (MDAP). The MDA formally initiate each increment of an evolutionary acquisition program as required by DoD Instruction 5000.02 “Operation of the Defense Acquisition System”.

What is the agreement between the milestone decision authority and program manager?

An agreement between the Program Manager (PM) and the Milestone Decision Authority (MDA) that reflects the approved program and contains schedule, performance, and cost parameters that are the basis for satisfying an identified mission need.

Related Question Answers

Clarines El Harchaoui

Professional

What is Milestone A?

Milestone A. Milestone A is a Milestone Decision Authority (MDA) led review at the end of the Materiel Solutions Analysis (MSA) Phase in the Defense Acquisition Process. Its purpose is to make a recommendation or seek approval to enter the Technology Maturation & Risk Reduction (TMRR) Phase.

Evolet Seyfried

Professional

What is full rate production?

Full Rate Production (FRP)
We retain capability, capacity, efficiency, and effectiveness (C2E2) for large-scale product inventory and management. We can mass-produce and deliver any size quantities of systems and components, and units attain Initial Operational Capability (IOC) during FRP.

Ouahid Backsen

Professional

What is the purpose of Milestone B?

Milestone B is a Milestone Decision Authority (MDA) led review at the end of the Technology Maturation & Risk Reduction (TD) Phase in the Defense Acquisition Process. Its purpose is to make a recommendation or seek approval to enter the Engineering and Manufacturing Development (EMD) Phase.

Veaceslav Erjenkov

Explainer

What are two outputs of the technology maturation and risk reduction TMRR phase?

What are two outputs of the Technology Maturation and Risk Reduction (TMRR) phase? a. Capability Development Document (CDD) and Reliability, Availability, and Maintainability Cost Report (RAM_C).

Dorut Cavestany

Explainer

What are the major efforts of the operations and support phase?

The Operations and Support (O&S) Phase is where a system is used and supported by users in the field. The main focus on this phase is the execution of a support system that sustains the system in the most cost effective manner possible.

Fedir Pucci

Explainer

What is a program of record DoD?

consumer, not DoD. Page 5. Government Programs of Record. A Program of Record (POR) is an Acquisition Program which is a directed, funded effort that provides a new, improved, or continuing materiel, weapon, or information system or service capability in response to an approved need.

Fay Hassenpflug

Pundit

What is the purpose of the engineering and manufacturing development phase?

The goal of this phase is to complete the development of a system or increment of capability, complete full system integration, develop affordable and executable manufacturing processes, complete system fabrication, and test and evaluate the system before proceeding into the Production and Deployment (PD) Phase.

Gessami Petzoldt

Pundit

Which is used to create the acquisition program baseline APB )?

The Acquisition Program Baseline (APB) is developed by the Program Manager (PM) before the initiation of a program for all Acquisition Category (ACAT) programs and depicts the current condition of a program.

Virtuosa Gerdesen

Pundit

What is the DOD acquisition process?

The Acquisition Process is the management process of a defense program. It's an event based process where a defense program goes thru a series of processes, milestones and reviews from beginning to end. Each milestone is the culmination of a phase were it's determined if a program will proceed into the next phase.

Alida Guino

Pundit

What are the four major phases of AT&L?

  • Materiel Solution Analysis.
  • Technology Maturation & Risk Reduction.
  • Engineering & Manufacturing Development.
  • Production & Deployment.
  • Operations & Support.

Hermelinda Florit

Pundit

How do you manage an acquisition?

6 Essentials for Managing Through a Merger or Acquisition
  1. Plan carefully. Hard work and analysis during due diligence should be implemented post-merger.
  2. Involve your people at all stages.
  3. Maximize aggregated spend.
  4. Put the best people in the right roles.
  5. Ensure a continuous improvement mindset.
  6. Show a passion for getting things done.

Jhoana Cendalsk

Teacher

What is the process of acquisition in psychology?

Acquisition refers to an early stage of the learning process during which time a response is first established. At this point in learning, the subject will begin displaying the behavior when a stimulus is presented, so we can then say that the behavior has been acquired.

Cristoffer Jockenhofer

Supporter

What is the purpose of the Milestone C decision quizlet?

Milestone C (MS C) is a Milestone Decision Authority (MDA) led review at the end of the Engineering and Manufacturing Development (EMD) Phase of the Defense Acquisition Process. Its purpose is to make a recommendation or seek approval to enter the Production and Deployment (PD) Phase.

Saniya Luetteke

Supporter

What is the primary purpose of the material solution analysis phase?

The main task during this phase is to conduct an Analysis of Alternatives (AoA). The purpose of an AoA is to evaluate the mission effectiveness, operational suitability, and estimated Life-Cycle Cost (LLC) of alternative solutions to meet a mission capability in an ICD in determining the system concept.

Eduina Kalachev

Supporter

What is the primary objective of the joint capabilities integration and development systems Jcids?

The primary objective of the Joint Capabilities Integration and Development System (JCIDS) is to ensure that the capabilities required by the joint Warfighter to successfully execute their missions are identified with their associated operational performance criteria.

Mattie Auzmendi

Beginner

What are two outputs of the TMRR phase?

What are two outputs of the Technology Maturation and Risk Reduction (TMRR) phase? a. Capability Development Document (CDD) and Reliability, Availability, and Maintainability Cost Report (RAM_C).