Asked by: Ygnacio Dmitrov
hobbies and interests woodworking

What is the best saw to use for cutting laminate flooring?

Last Updated: 17th June, 2020

You can make straight cuts with a circular saw, a table saw or a chop saw. A blade with a tooth count of 100 or more is best, and to reduce chipping, its leading edge always should contact the face of the board. When cutting with a circular saw, this means turning the board over and cutting from the back.

Click to see full answer.

Furthermore, what is the best saw for cutting laminate flooring?

A jigsaw is a real all-rounder when it comes to cutting laminate floors. It's best used to cut out shapes from your board. For example, when you want to place boards around your toilet or maybe a pillar. Always use a fine toothed blade and have the saw blade spinning before you touch the board.

Beside above, do I need a special blade to cut laminate? The best circular saw blade for cutting through laminate for a kitchen counter is one with many fine teeth -- at least 40. Blades with carbide tips tend to last longer than regular steel. In addition, you should choose a narrow blade, or one with thin kerf, as it's called in saw talk.

One may also ask, can I use a circular saw to cut laminate flooring?

A Circular Saw: ?You can also use a circular saw but it will require additional tools like a square and some type of work surface to cut the laminate flooring on. Sawhorses and a piece of plywood would make a pretty ideal workbench for this task and would be the easiest and most convenient method, in my opinion.

How do you cut out a piece of laminate flooring?

How to Cut Laminate Floor That Is Already Installed

  1. Mark the laminate flooring along the desired cut line by using a chalk line.
  2. Set the cut depth on a circular saw to 1/32-inch deeper than the thickness of the laminate flooring layer.
  3. Put on a pair of safety glasses and align the circular saw blade with the chalk line on the flooring.

Related Question Answers

Mikeldi Gagemeister


Do you cut laminate flooring upside down?

Cut out the curved shape.
With a standard jigsaw blade, flip the laminate plank upside down. If cutting the laminate face up, place painter's tape on the laminate along the pattern to keep it from chipping. Mark the cut line on top of the tape and cut with a jigsaw with a special blade.

Gurjit Pounzi


How do you cut laminate lengthwise?

How to cut laminate flooring lengthwise
  1. Step 1: Place spacers along the walls.
  2. Step 2: Lay the laminate flooring board down, making sure the tongue is oriented towards the wall.
  3. Step 3: Use a straight edge or another laminate flooring board to guide the jigsaw / circular saw, while doing the cut.

Arian Planthaber


What tools do I need to cut laminate flooring?

Whilst it may be tempting to use a circular saw or table saw to rip laminates, unless you have an expensive carbide tipped blade stick with the jigsaw or handsaw. If you have trouble cutting straight lines with a jigsaw then clamp a straight edge (spirit level or straight piece of timber) onto the board.

Sonam Hlutkov


How can I cut laminate without chipping?

If you're forced to cut a laminate sheet from the front with a power saw, you can avoid chipping by laying masking tape along the cutline, sawing through the tape, and removing it after you're done. You can further minimize chipping by using a plywood-cutting blade with a large number of teeth.

Janeen Mittelstaedt


Can you cut laminate with a hand saw?

You can perfectly well saw your laminate floorboards with a regular hand saw. First make a short incision and then continue to saw. Put the saw line as close as possible to the bearing surface and clamp the loose piece down. Always use a fine tooth and have the saw rolling before you touch the boards.

EguzkiƱe Castelhano


How do you cut waterproof laminate flooring?

The First Row
  1. Score and cut the tongue off the first row of vinyl planks using a utility knife.
  2. Hold the next plank at a slight angle against the previous plank's end and fold down to click it into place.
  3. To cut the last piece to fit, score with a utility knife and snap the plank.

Xabel Stogmeier


How much is a laminate floor cutter?

Price: $29.99. Wonder cutter for laminate.

Bencomo Gschwandner


Can I cut laminate flooring with a Stanley knife?

As cutting vinyl planks can be dangerous, we strongly recommend using the knives and cutting tool provided by Quick-Step. Moreover, the concave blade prevents the knife from being caught into the structure of the floor, while the cutting tool protects your hands. Difficult patterns can be cut with a jigsaw (décor up).

Magnolia Finnegan


Can you cut laminate flooring with a utility knife?

A regular utility knife blade can be used to cut flexible, self-adhering laminate strip material. The caveat is that you must change the blades frequently so the knife cuts properly -- a dull blade will not cut effectively.

Soria Jehoshaphat


How do you cut laminate flooring with a miter saw?

Cut to Length
The easiest saw to use for cutting your planks to length is a power miter saw, or chop saw. These saws are available with 8- to 12-inch diameter circular blades. You can cut the material in one motion, and the fence aligns the material to the blade for a perfect cut every time.

Susy Jmakin


What is the best laminate cutter?

5 Best Laminate Floor Cutters 2019 – Reviews
  1. Roberts 10-64 Laminate Floor Cutter – Top Pick.
  2. Bullet Tools ES00-0009 Laminate Flooring Cutter – The Runner-Up.
  3. SKIL 3601-02 Laminate Flooring Saw – Best for the Money.
  4. EAB Tool Exchange-a-Blade 2100005 Laminate Flooring Cutter-Tool.