Asked by: Assia Glen
technology and computing computer peripherals

What is the purpose of 4 pin auxiliary connector on a motherboard?

Last Updated: 29th September, 2021

What is the purpose of the4-pinauxiliary connector on a motherboard? To provideextra voltagefor a processor.

Click to see full answer.

Consequently, what is the purpose of the 4 pin Molex connector?

Power Supply Connectors These "Molex" connectors bring DC powertothe drives inside a PC case. The large one on the right is usedfordisk, CD-ROM and DVD drives, while the small connectorisused for floppy drives and other devices.

Furthermore, what is the purpose of ATX power connector? ATX power connectors are designed to connectacomputer's power supply to an ATX motherboard.Theyare constructed of metal pins laid throughout a nylon matrix.Afemale type ATX power connector extends from theATXpower supply to plug into the motherboard.

Beside above, what does the 4 pin connector on a motherboard do?

Pretty much every modern motherboard hasaseparate 12V power connector that's eithera4-pin or an 8-pin. The primary purpose ofthispower connector is to power the VRM that supplies powertothe CPU.

What is the purpose of a post diagnostic card?

In computing, a POST card is a plug-indiagnosticinterface card that displays progress and errorcodesgenerated during power-on self-test (POST) of acomputer. Itis used to troubleshoot computers that do notstartup.

Related Question Answers

Naoufal Mather


Can a 3 pin fan plug into 4 pin?

Apparently a 3-pin fan can plugdirectlyinto a 4-pin socket. Two of thepinsprovide power to the fan, the 3rd provides an RPMpulse tothe motherboard to read the speed. The 4th pin isfor PWMspeed control. If you plug a 4 pin fan into a3pin socket, the fan speed will be controlledbyvoltage and it'll still work.

Trinity Camaz


Sada Tube


What does Molex stand for?

Molex is the name of the company whodevelopscomputer and other related connectors and products. Thisterm isalso known as the Molex power connector, which istheconnector shown in the picture and is what connects yourcomputerpower supply to drives and devices insidethecomputer.

Simoneta Atherley


What is a 4 pin power connector?

The 4 pin power connector cable (12 volt cable)isdesigned to give extra power support tothemotherboard.

Wanderley Lukhovitsky


What is a 4 pin floppy connector?

Pinout for the Standard 4 Pin FloppyDrivePower Connector
The floppy drive 4 pin powersupplyconnector is the standard floppy drivepowerconnector in computers today. The powerconnectoritself is a Berg connector, sometimesreferred to as aMini-Molex connector.

Jaden Cortezon


What voltage is a Molex connector?

Standard 4-pin Molex connectors coming from aPSUsupply ~12v on the yellow wire, and ~5v on theredwire.

Stancho Oettle


How many watts does a Molex connector have?

You can combine 2 molex connectors into a 6pinpci-e connector that will provide 72 watts(thesewhere supplied in the box with my evga vid cards). Itwouldbe a bad idea to use a 6 pin to 8 pin aftermarketconnectorbecause it would mean that you aresupplying 75watts where you are supposed to supply150watts.

Francesco Campomanes


Will a 4 pin CPU connector work in a 8 pin socket?

The answer is yes. A 4-pin can be put,byitself, into an 8-pin CPU power socket andthemachine boot up and run. It will give it what poweritcan, and if the CPU draws more than that,itwill shut the system down. If it shuts down when youstartdoing intensive stuff, just underclock theCPU.

Esma Blomeke


Is ATX 12v CPU?

Connects to the motherboard ATX 12Vsocket.Provides additional power to the CPU. Connects tothemotherboard EPS 12V socket. A hybrid of the 4PINATX12V and EPS 12V connectors that can be splitinhalf or combined to accommodate either the EPS 12V Socketorthe ATX 12V socket.

Fdila Vinnichenko


What is ATX CPU?

(Advanced Technology EXtended motherboard) ThePCmotherboard that superseded the Baby AT design. TheATXlayout rotated the CPU and memory 90 degrees,allowingfull-length expansions to be plugged into all sockets. Thepowersupply blows air over the CPU rather than pullingairthrough the chassis.

Devid Leiteira


What is a 20 pin connector?

The 24 pin motherboard connectorisactually just the 20 pin connector with 4 extrapinsadded on the end. The original 20 pins wereunchanged. Theextra 4 pins are not separate rails. They'rejust extralines to provide more current to the samerails.

Diodora Capper


What is the CPU power connector?

CPU Power Connectors. Power fortheprocessor comes from a device called the voltage regulatormodule(VRM), which is built into most modern motherboards. Thisdevicesenses the CPU voltage requirements (usually via sensepinson the processor) and calibrates itself to provide thepropervoltage to run the CPU.

Xiangyu Turrero


What does overclocking mean?

Simply put, overclocking means setting yourCPUand memory to run at speeds higher than their official speedgrade.Almost all processors ship with a speed rating. For example,anIntel Core i7 860 runs at 2.80GHz out of thebox.Overclocking a Core i7 860 means pushing it toaclock speed higher than 2.80GHz.

Dativa Schiehle


What is a 24 pin ATX power connector?

The ATX 24 pin main power connector isthestandard motherboard power connector used in nearlyeverycomputer. This is the large 24 pin connector thatusuallyattaches near the edge of the motherboard.

Ruddy Olano


How do I choose a motherboard?

What To Consider When Buying A Motherboard
  1. Form Factor. Initially you'll need to select a formfactor.
  2. Processor Socket. After choosing a form factor you'll needtochoose a processor socket.
  3. RAM (Random Access Memory) Next up, RAM, short for RandomAccessMemory.
  4. PCI Slots. A PCI slot is a connection or port that is locatedonthe motherboard.
  5. Features.
  6. SATA.

Uzuri Graña


What are the two most common form factors used today for computer cases?

A tower case conserves space since it candoubleas a monitor stand. What are the two most common formfactorsused today for computer cases, power supplies,andmotherboards?

Faheem Garachana


What is the difference between ATX and micro ATX?

Micro ATX is one of the offshoots ofATX,and its main difference from the main ATXform factoris size. ATX retains a generally rectangularboard sizemeasuring 305mm. by 244mm. While ATX boardstypically havefive expansion slots, Micro ATX typically hasthree withfour being the absolute maximum.

Nere Cortinas


How can I test my power supply?

The Answer
  1. Plug the power supply into the wall.
  2. Find the big 24-ish pin connector that connects tothemotherboard.
  3. Connect the GREEN wire with the adjacent BLACK wire.
  4. The power supply's fan should start up. If it doesn't thenit'sdead.
  5. If the fan starts up, then it could be the motherboardthat'sdead.