Asked by: Sorayda Amores
music and audio folk music

What kind of paint is used on Fender guitars?

22
For the most part, Fender used automotive paint from DuPont, Duco nitrocellulose lacquers and Lucite acrylic lacquers. The guitars obtained by the Beatles were painted in factory custom color called “Sonic Blue.” It was not a popular color with musicians at the time, and not that many were sold.


Thereof, what finish does fender use?

Fender uses a variety of finish types on its instruments, from the original nitrocellulose lacquer finishes used so often in the company's 1950s-'60s era (and beloved of vintage guitar enthusiasts) to more modern urethane and polyester finishes.

Also Know, what are Fender guitars made of? Traditionally, Fender guitar bodies are made from a narrow range of woods, with very basic constructions (generally one or two pieces). Fender currently offer these wood options on their stock guitars, including Stratocasters, Telecasters, Jaguars, and the Precision and Jazz basses.

Secondly, what is the best finish for guitars?

Guitar Finishes

  • Lacquer. Nitrocellulose-lacquers.
  • From the beginning, wood was the natural choice for most tools and useful objects. It was plentiful, easy to work and available in all useful sizes.
  • Lacquer.
  • Nitrocellulose Lacquers.
  • Acrylic Lacquers.
  • Polyurethane Lacquers.
  • Polyester Finishes.
  • Catalyzed Lacquer.

What color is tidepool?

blue

Related Question Answers

Tarsha Chaques

Professional

Can you paint over guitar finish?

To paint over an existing finish, first fill any chips with auto body filler. Then lightly sand the whole surface to an even, dull finish with 800 grit sandpaper. This will give the new paint something to grab. Modern acrylic primer spray paint is almost exactly the same formula as topcoats.

Sharyn Berlana

Professional

What type of finish is used on Gibson Guitars?

Gibson instruments are finished with several coats of a high-quality nitro-cellulose lacquer. This finish is hand-buffed to a high-gloss, mirror-like surface. Unlike other less expensive finishes, nitro-cellulose does not detract from the tone of the instrument and ages beautifully.

Balint Bertelt

Explainer

Can you relic a poly finish?

Kyri Senior Stratmaster. easiest way is to remove the poly, then refinish in nitro, play the snot out of the guitar, and let nature take it's course. otherwise, try feathering in the chipped areas, it'll smooth the hard line between the finish and the wood.

Aquiles Chedas

Explainer

Is my guitar Poly or nitro?

Just burn the guitar. If the fire has red flames and it smells spicy and aromatic then it is Nitro. Are the flames more orange-ish and bright and it smells chemical like you burn some plastic cups then it is Poly.

Robustiana Hommell

Pundit

What is a nitrocellulose finish?

Nitrocellulose, the first man-made plastic, was created in 1862. In the early 1920's nitrocellulose lacquer became the preferred finish on high-quality furniture and musical instruments. It is an exceptionally fast-drying solvent finish and a stronger version of the original shellacs and varnishes.

Neely Illan

Pundit

What clear coat is used on guitars?

Acrylic lacquer will be the go. If you want high gloss it will take a few coats depending on your prep work.. Wet it in with thinned down coats at the end it really helps.

Ero Rebohm

Pundit

What kind of finish is used on acoustic guitars?

Nitrocellulose lacquer
This is traditionally the most common finish used on steel string acoustic guitars. It is very durable and resists scratching. If it is applied too thickly it can crack but when applied well and not too thickly, this is still a very good finish for acoustic guitars.

Noria Aldenhofen

Pundit

Can you use polyurethane on a guitar?

Poly finishes completely harden and solvents cannot break them down, Poly finishing is very resistant to cracks, dulling and scratching while also being durable. If you want the new shine finish to last a long time, as long as you have your guitar, then a Poly finish is what you want.

Sharie Irigain

Teacher

What is the difference between acrylic and nitrocellulose lacquer?

Yes, acrylic does dry faster than nitrocellulose and I think it would be a good choice for a guitar finish. It also doesn't yellow - a plus or a minus depending on your view of relics - and produces a less brittle, more flexible finish. It is more expensive than nitro though.

Sulay Irate

Teacher

How long should you wait between coats of lacquer?

How long should I leave between coats? Drying time is affected by temperature. As a rule of thumb for nitrocellulose lacquers, apply 3 coats over a 30 minute period, then leave to dry for about 6 hours, or overnight. Then apply a further 3 coats and repeat until you have built up sufficient lacquer or paint.

Asha Rehpenig

Teacher

Should you refinish a vintage guitar?

In general, valuable vintage guitars should never be refinished unless they have no original finish left. Minor damage, play wear and weather checking are not, generally, sufficient reason; these are better regarded as the 'patina' associated with a vintage instrument.

Nordin Garcia Hierro

Reviewer

Does a guitar need a finish?

Practically, its good to have a finish on a guitar, it will remain more stable, and provide many more years of service than a guitar with no finish. If you do go with the bare wood route, I would recommend the application of an oil finish like tung oil/boiled linseed oil/teak oil and keep it waxed.

Harvey Wirsik

Reviewer

Why are fender squiers so cheap?

4 Answers. The main difference is in the price and the quality. The fender guitars are more expensive and tend to be of higher quality, whereas Squier guitars are made more cheaply and have lower quality.

Kapil Keiko

Reviewer

Does fender own Gretsch?

The Gretsch company is still owned by the Gretsch family in South Carolina. Fender has distribution rights and makes custom Gretsch guitars in the Fender custom shop. Standard models are made by Terada in Japan.

Duverney Schepers

Reviewer

Is Fender guitars going out of business?

The company has announced it will liquidate its consumer-electronics business while restructuring its business to focus on its musical instruments. The debt of Fender Musical Instruments Corp, another leading guitar company renowned for its Fender Stratocaster guitar, is estimated at $100 million.

Biyu Handl

Supporter

Where are Ibanez guitars made?

Most Ibanez guitars were made by the FujiGen guitar factory in Japan up until the mid- to late 1980s, and from then on Ibanez guitars have also been made in other Asian countries such as Korea, China, and Indonesia.

Engracio Dalaker

Supporter

Who owns Fender guitar?

Fender Musical Instruments Corporation
Formerly Fender Electric Instrument Manufacturing Company
Brands Bigsby Charvel Gretsch Jackson Squier
Parent Servco Pacific
Website fender.com

Niriti Lamberto

Supporter

Which is better alder or ash?

Alder is almost always a light tan color, and has a very subtle grain figure. In contrast, Ash is a light cream color, with much darker and more pronounced grain figuring. Because Alder's appearance is more plain, it is the better candidate for solid color finishes. It also looks great with sunbursts.

Eusebi Andreozzi

Beginner

How do you make a homemade guitar?

Method 2 Making a Simple Tissue Box Guitar
  1. Gather your supplies.
  2. Find an empty tissue box and pull out the clear plastic piece inside the hole.
  3. Tape the paper towel roll down to one of the skinny ends of the box.
  4. Decorate the guitar.
  5. Glue down a popsicle stick above and another below the hole to make the bridge.

Co-Authored By:

EveryThingWhat Staff Editor

12

19th March, 2020

66

97% of readers found this page helpful.

4.8/5

Click a star to add your vote

Similar Asks
Trending