Asked by: Kevyn Gayarre
sports snooker and pool and billiards

What size patio blocks for above ground pool?

Last Updated: 15th January, 2020

33
12" x 12" x 1"

Click to see full answer.

Herein, how much sand do you put under an above ground pool?

Sand Depth Also, sand under an aboveground pool acts as cushioning for its floor, making it more comfortable for feet. The standard depth of sand that should be used under an aboveground pool's floor is 2 inches.

Secondly, can you put above ground pool on pavers? We put pool on at least an 8-inch base of fine sand covered with a foam board for additional protection. This needs to be leveled so as to also provide the best water placement. Don't use the paver base; however, you may be able to use the pavers to contain the sand. You can do it on pavers, or concrete.

Likewise, people ask, do I need to put sand under my pool?

The only pools that require sand as a base are vinyl lined ones. The sand is easily troweled flat and smooth and provides a compactable surface free of any rocks or debris with sharp edges that could puncture the liner. Nowadays, it is mostly only used under above ground pools.

How do you prepare the ground for an above ground pool?

Yard Preparation

  1. Step 1: Placement. The first step is deciding where you want to place the swimming pool in the backyard.
  2. Step 2: Clean the Area. Remove all items that could make it difficult to secure a proper foundation for the pool.
  3. Step 3: Measure.
  4. Step 4: Start Digging.
  5. Step 5: Level the Pool Hole.
  6. Step 6: Wait 24 hours.

Related Question Answers

Kaixin Volcer

Professional

How do you prepare the ground for an Intex pool?

Use a line level on the string to measure for level at 12-36 points around the pool. Use flat shovels or a sod cutter machine to remove turf, and lower the high spots. Add a one inch layer of sand. The Wrong Way: Raise the low spots by adding sand – not checking for level.

Dia Petschel

Professional

How do I level my ground for a pool without digging?

How to Level the Ground for Pool Installation Without Digging
  1. Tools you need to Establish Pool Location.
  2. 1) Hammer a stake into the ground where you want the center of your pool to be.
  3. 1) Remove any vegetation, such as grass, that is growing in the area where the pool will be placed.
  4. 2) Use a carpenter's level and check the ground to see if it is level.

Brianne Sistero

Explainer

How do you level an uneven yard?

Method 1: Leveling out a Mildly Uneven Lawn by Topdressing
  1. In a wheelbarrow or similar container, mix up a batch of topsoil, sand, and compost—basically, a soil medium that can support turfgrass growth.
  2. Apply 1/2 inch of this soil mixture on top of the low areas.
  3. Rake the topdressing to spread it out evenly.

Magalis Sualdea

Explainer

Can you use sand to level a pool?

Lay out a layer of sand 1 to 2 inches (2.5 to 5.1 cm) deep across the work area, then roll over it with the tamper. If there are any areas that you need to level, use crushed limestone instead of sand.

Ilonka Kromminga

Pundit

Can you level a pool with water in it?

There is no way to raise a pool with water in it. Any attempts to do so would disturb the cove and put to much strain on the liner. The pool water level needs to be lowered to just a couple of inches before any leveling can be done.

Inam Cheung

Pundit

Should I put sand under my Intex pool?

I use a little sand under Intex pools, to cushion the bottom, but not for leveling. You can then just use a ground cloth over the dirt or you could cover the area with an inch or so of sand. A twenty four foot pool would probably use about 3 tons of sand.

Enora Babetov

Pundit

Should you put a tarp under an above ground pool?

It's OK to use a tarp under the sand but not in place of it. A tarp will allow all the lumps and bumps of a dirt base to show through into the base of your pool. With just a tarp you still have to have a cove for the pool to be safe. The cove can be dirt, sand or foam, but it has to be there.

Chunxiang Nabaritza

Pundit

How many bags of sand do I need for a 15 foot pool?

For a pool that is 15ft x15 ft. which works out to be 225 square feet, for every inch of sand for your 225 sq. ft. area, you will need 38, 50lb bags of sand.

Cesc Greulich

Pundit

How much sand do I need for a 24 foot above ground pool?

Masonry Sand Volume Chart for Above Ground Pool Installations
Pool Size Tons Yards
24' Round 5 3
26' Round 6 4
27' Round 6.5 4
29' Round 7 4.5

Diao Ebensperger

Teacher

What kind of sand do you use for an above ground pool?

Mason sand, sometimes called mortar sand, can normally be found at any sand/gravel yard or masonry supply yard. It is usually measured in yards. It is very fine and should not contain any rocks or pebbles. This will create a very smooth bottom and is the most popular method to use when installing an above ground pool.

Xenia Trufero

Teacher

How much sand do you need for a 22 ft round pool?

You will need around 4.7 tons of sand for a 22 foot pool.

Zhiliang Aperador

Teacher

How do I get the wrinkles out of my above ground pool?

Video of the Day
  1. Drain the pool water until only 1 inch of water remains on the bottom of the pool.
  2. Climb into the pool and get on your hands and knees. Choose a wrinkle and press it toward the wall of the pool with your hands.
  3. Remove a portion of the railing on top of the pool wall.
  4. Tip.

Conmemoracion Kerkhof

Teacher

How full should my pool sand filter be?

Some sand filters have a fill line inside showing where the sand should come up to. Typically the filter is just a little less than half full of sand, there needs to be room on top for water circulation.

Elisea De Lucas

Reviewer

Can you put a pool on grass?

Installing an above-ground pool on a natural grass lawn is not a good idea, particularly if you plan on taking down the pool for part of the year. Since natural grass does get muddy and can be quite slippery when wet, there are also issues around safety and, of course, tracking mud and wet grass into the house.

Yahel Kastenschmidt

Reviewer

What can I use instead of sand under my pool?

You could go with a thin layer of sand. Smooth it out, wet it down and pack it down good. Over top of that you could use carpet foam, carpet felt, indoor/outdoor carpet, something along those lines that can be found in the remnants, cutoffs or discount racks of carpet stores.

Sharmin Tortajada

Reviewer

How do I level my yard for a small pool?

Take the time to level the ground the first time.
  1. Hammer a metal stake where the center of the pool will be.
  2. Tie a length of string about 6-inches longer than the radius of the pool to the stake.
  3. Remove all grass, sod and other vegetation from the marked pool area with shovels or a powered sod cutter.

Nery Kui

Reviewer

What can I put under my grass in my pool?

Concrete Pads
It is a good pad for the above ground pool on grass because it is flat and level. It will keep the pool in place, and it would not shift around. But don't forget that concrete is a pretty rough surface, and in the long run, it might damage the pool liner.

Aijuan Vancoller

Supporter

How hard is it to disassemble an above ground pool?

Disassemble the skimmer and remove the pump and filter system. Remove the drain plugs from the filter canister and the pump to allow any water inside to run out. Clear any debris from the pump basket and empty out the filter medium, which is usually sand or a cartridge. Replace the plugs on the pump and filter.

Bailo Pelajo

Supporter

Can you backfill around an above ground pool?

Although most pool manufacturers do not recommend it, homeowners and contractors frequently use an above-ground pool as an in-ground pool. The pool must be filled prior to backfilling to prevent pool wall collapse and the water level in the pool must always be higher than ground level by at least 1 foot.

Co-Authored By:

EveryThingWhat Staff Editor

8

15th January, 2020

26

84% of readers found this page helpful.

4.2/5

Click a star to add your vote

Similar Asks
Trending