Asked by: Tyesha Leo
home and garden indoor environmental quality

Where is the filter on my YORK furnace?

Last Updated: 12th May, 2020

Answer: The filter in the York Diamond 90 Upflow versions have their filters located on the side or bottom of the furnace in a filter frame. In the Downflow versions are located in the plenum or ductwork above the furnace. You can also take a look at the owner's manual, which lists the sizes and locations for filters.

Click to see full answer.

Herein, where is the filter on a furnace?

The furnace filter is usually located inside of the blower compartment, where the return air enters the blower compartment. Most units have built-in furnace racks.

Likewise, where is the filter located on a Goodman furnace? The filters should be located at the side on the bottom of your Goodman GKS9. and the width of your furnace's cabinet.

Additionally, do all furnaces have a filter?

Still, you know that it is in there somewhere because every heating and cooling system in a home has a furnace filter. This applies to all different types of heating furnaces, including gas furnaces, oil furnaces, electric furnaces, as well as air conditioners.

Can you run your furnace without a filter?

If you run a furnace without a filter for one night, it won't affect your HVAC system detrimentally. However, the longer you run your heating system without an air filter, the more contaminants accumulate inside your heating unit inner mechanisms.

Related Question Answers

Eñaut Ababou


How do I know when to replace my furnace filter?

Signs your furnace filter needs changing:
  1. The filter is noticeably gray in color, and you can see dirt and dust built up on the filter media.
  2. Your home is dustier than usual.
  3. Your heating or cooling system is cycling longer than it usually does.

Celsa Ruelf


Do all air handlers have filters?

All central heating and cooling systems should have an air filter, but the filter can be harder to locate on some HVAC units than others. The air filter is usually located in the return air duct or blower compartment before the return air reaches the air handler.

Stacey Lim


How do I change my HVAC filter?

Changing your HVAC Filter
  1. Shut the HVAC unit off.
  2. Remove the access panels to get to the filter.
  3. Remove the old HVAC filter.
  4. Insert the new HVAC filter. Be sure to pay attention to the arrows on the sides of the filter.
  5. Close the access panels and turn the HVAC unit back on.

Chenyi Pfenningwerth


How do I clean my furnace?

How to Clean a Gas Furnace
  1. Turn off power/gas to the furnace. Turn off power to the furnace at the breaker box.
  2. Clean furnace surfaces. Wipe exterior surfaces with a damp rag.
  3. Remove the blower.
  4. Carefully clean the blower.
  5. Clean the pilot or hot surface igniter.
  6. Clean the flame sensor.
  7. Inspect the drive belt.
  8. Lubricate (but not too much).

Auixa Weihofen


What if my furnace doesn't have a filter?

Without a filter, the furnace is likely to get dirty. This reduces efficiency and comfort and increases heating costs. If there is an air conditioning evaporator coil in the supply duct, this coil is likely to become clogged if there is no filter. This will restrict airflow through the system.

Salca Dammschroder


How do I reset my furnace?

How to Find My Furnace Motor Reset Button
  1. Turn off the power to the furnace at the circuit breaker. The circuit breaker is clearly marked.
  2. Lift up the blower compartment cover to access the blower wheel and blower motor.
  3. Look for a small red or yellow button on the side of the blower motor.
  4. Press the reset button down if it has popped up.

Bernarda Promod


How do I find my furnace?

Typically your furnace is centrally located in the home. It is usually located in an area such as a utility closet (by a cold air return), garage, attic, basement, or crawlspace; in the case of a heat-pump (a dual-system) it will be located outside of the home.

Minta Cougil


Do you need to change furnace filter in summer?

Since all of the air that you breathe in your home flows through the furnace filter, it is extremely important that this filter be changed, at the very least, every three months if not monthly. So, yes, your furnace filter needs to be changed even in the summer.

Tarik Peshke


What furnace filter should I use?

Choosing the right furnace air filters for your furnace
Most residential filters range from 4 to 12. Furnace manufacturers prefer the traditional spun fiberglass ac filters (MERV 2). These filter out enough of the large particles to protect the furnace while providing maximum airflow.

Paulius Marginet


Why is my furnace filter wet?

A wet air filter commonly indicates a clogged condensate pan or condensate drain lines. Water is a natural by-product of a functioning air conditioner. As the system draws warm air from your home to be cooled, moisture from the air condenses on the evaporator coils and then drips into the drain pan.

Ingeborg Simkin


Are furnace filters universal?

Because furnace and HVAC manufacturers have different size slots for air filters, they are, unfortunately, not universal. This means you will have to find the right size air filter for your furnace as others will be too small or large to effectively clean the air stream of harmful particles.

Minerva Machelidt


Can you put a wet filter in your air conditioner?

Keeping Your A/C Maintained
Remove it from the unit, rinse it off with water and allow it to air dry completely before putting it back in. Sliding a wet filter back into your air conditioner is just asking for ice formation and other issues, and trying to wipe the filter dry is likely to damage its delicate surface.

Eira Such


Are all furnace filters the same size?

While there are no standard furnace filter sizes that will fit all models, the most common filter dimensions include: 10 X 20. 14 X 20.

Emese Labadia


Can I use two furnace filters?

Bottom Line: Putting two filters will not make it last longer but may make you have to replace it earlier, assuming it doesn't already reduce air flow too much with just the filters.

Ilir Carballares


Where is the filter on my outside AC unit?

Filter locations vary depending on your air conditioner, but they are usually found along the air conditioner return duct. If the filter is not located within the air conditioner unit, look for an access panel on the interior or exterior of your home near the air conditioner location.

Alexandr Buechholz


How do I know what size filter to buy for my furnace?

Furnace filters are sized by width, length and thickness. The size on the filter is usually expressed in inches (example: 16"x20"x1"). A filter that is the wrong size will typically not fit, or may not stay in place, once installed. The owner's manual for your furnace should tell you what size you need.

Abul Sanchez Pablo


How do I remove a stuck furnace filter?

Grasp the filter edge and remove it from the duct
Now pull the Gripper away from the duct to remove the filter from its slot. If the filter is stuck you may have to rock the filter from side to side to free it before pulling it from the slot.

Kawsu Paleo


Where is the filter on a Lennox furnace?

Your air filter is located in either the blower compartment of your furnace, in an attached filter case, or in a wall-mounted return air grille. If you cannot locate the air filter, call your local Lennox Dealer for assistance.