Asked by: Jinli Bagishaev
home and garden home appliances

Why is my washer stuck on spin?

Last Updated: 31st March, 2020

11
The first step is to drain the washer with a drain hose. Then remove the filter cover and see if you can remove any debris blocking it. If the washer is stopped on its spin cycle, such as during a power outage, it needs to be reset before it can be restarted. Then it will finish the spin cycle.

Click to see full answer.

Also, why is my washer stuck in the spin cycle?

If you have a GE washer that's stuck on its spin cycle, you'll need to reset the machine. This is because the appliance is full of water during this cycle, and merely turning off the washer will leave it filled with water. Next, plug the washer back in and lift the lid six times in 12 seconds.

Secondly, how do you fix a washer that won't drain or spin? Remove the front panel screws Start by unplugging the machine and emptying the water. Bail the water out of the tub, or you can drain the tub using gravity by placing the washer drain hose on the floor near the drain or in a bucket. Clamp the hose to prevent any remaining water from running out.

One may also ask, how do you reset the spin cycle on a washing machine?

To perform the Master Reset, carefully unplug the washing machine from the power outlet and leave it unplugged for one minute. After one minute is up, plug the washer cord back into the wall. Next, open and close the door of the washing machine 6 times within 12 seconds to send a “reset” signal to all the components.

Why is my washer not spinning or draining?

If the washer won't drain there might be a clogged pump or hose. It's common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. If the washer won't drain the lid switch assembly might be defective. This is a very common problem.

Related Question Answers

Leizuri Belohvostikov

Professional

Does Spin Cycle add water?

Basically, it pours water from the top while draining it out from the bottom. It drains the water faster than it can pour it, so it does not actually fill with water, but it does re-wet the clothes, so the clothes are dripping wet when the cycle is complete. It also agitates while filling with water.

Kourtney Pragona

Professional

How long does a spin last on a washing machine?

The default temperature is cold and effectively washes as if you were hand washing the clothes yourself. This load works better with smaller amounts of clothing and runs for a short time period of 1 hour.

Morton Espeso

Professional

How do I reset my washing machine?

Top Load Washer - Hydrowave Motor Reset
  1. Unplug the washer for 1 minute from the electrical outlet.
  2. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
  3. The motor has now been reset and is ready for you to start a cycle.

Quirico Southgate

Explainer

How do I get my Samsung washer to spin only?

Step 1 of 4
  1. Press POWER to turn the washer on.
  2. Press and hold Spin for 3 seconds.
  3. Press Spin repeatedly until a desired spinning speed is selected. For this example, High is selected.
  4. Press START/PAUSE to start.

Michale Struchholz

Explainer

How do I calibrate my washing machine?

  1. Power off, and then power on the washing machine.
  2. Hold down Temp. and Delay End+ simultaneously for 3 seconds to enter Calibration mode.
  3. Press and hold Start/Pause (Hold to Start) to run the Calibration cycle.
  4. When the cycle is complete, “0” appears on the display and the washing machine will turn off automatically.

Dewitt Guzairov

Explainer

Why is my Samsung washer not spinning?

To determine if the drive motor is defective, first ensure that the motor is getting power. If the drive motor hums but doesn't run, is noisy, or does not turn freely, replace it. The washer transmission might be worn out or defective. Transmissions have gears in them that can fail causing the washer to not spin.

Dionisie Eller

Pundit

How do I reset my Samsung washing machine?

To reset your Samsung washing machine you need to simply disconnect the washing machine from power for 5 to 10 minutes. (Unplug the washer from the wall outlet or flip the breaker in the breaker box for the washing machine).

Lekbira

Pundit

How do I tighten the belt on my washing machine?

Press the motor into the washing machine and downward or toward the edge of the appliance. With the motor pressed firmly in place, tighten the mounting nut by turning the wrench clockwise. Keep a finger on the belt; when you can depress it only about 1/2 inch with your thumb, you have reached proper tension.

Fengyun Awroroff

Pundit

How do you reset a Kenmore washing machine?

How to Reset a Kenmore Elite HE Washer
  1. Press the "Stop" button twice, and then press the "Power" button.
  2. Choose a wash cycle (e.g. "Normal"), and then choose your wash options (e.g. "Hot/Cold" or "Cold/Cold").
  3. Press the "Start" button to complete the reset process and restart the washing machine.

Xiana Citron

Teacher

How do you stop a delay start on a washing machine?

Dishwasher - Canceling the Delay Start Option
  1. Press the "Delay Start" pad until the hours of delay indicator goes off.
  2. If the Delay Start pad does not have an Off selection: Use the Start or Start/Reset pad, depending on the model. On most models, pressing and holding the Start pad for 3 seconds will cancel any set cycle, including the Delay Start cycle.

Haresh Vadbolski

Teacher

How do I reset my front load washer?

How to reset the washing machine:
  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

Siamak Quinaz

Teacher

How do you reset the code on a Whirlpool washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

Mujer Read

Reviewer

What is Drain and spin cycle?

Drain and spin cycle means that the machine will drain the water and then spin them dry. Because it uses less water, the clothes dry faster in this way. On the other hand, rinse and spin cycle means that the machine will simply rinse your clothes with clean water and then spin them dry.

Salimatou Barthold

Reviewer

How do you manually drain a washing machine?

Drain a Top-Loading Washing Machine
  1. STEP 1: Turn off the power.
  2. STEP 2: Locate the drain hose and water supply hoses.
  3. STEP 3: Drain the washing machine of water.
  4. STEP 4: Remove a drain hose clog.
  5. STEP 5: Remove a drain pump clog.
  6. STEP 1: Turn off the power.
  7. STEP 2: Locate the drain pump filter and/or drain tube.

Niang Scholtz

Reviewer

How do you fix a washing machine pump?

How to Repair a Washing Machine
  1. Step 1: Check the drain hoses to make sure they're draining properly.
  2. Step 2: To access the pump, first bail and sponge out any water in the machine's tub.
  3. Step 3: Locate the pump.
  4. Step 4: To remove the pump, loosen the bolt that holds the drive belt taut and move the washer motor on the bracket to loosen the belt.

Melvi Nogueroles

Supporter

What does it mean when my washing machine wont spin?

An unbalanced load of laundry is one of the most common causes of an inadequate spin cycle. Sometimes clothing can settle on one side of the drum, throwing off the motion of the washing machine. (This happens most often when washing large and heavy items like comforters or heavy coats.)

Leonte Abdulbasiroff

Supporter

Why isn t my washer spinning the clothes dry?

Washing Machine Drain Pump Clogged or Faulty
If your washer will not spin out all water and clothes are still wet, the drain pump might be clogged with debris or possibly faulty. There could be a foreign object that is stuck in the pump and inside the drain hose. Test to be sure the drain pump is working properly.

Chase Bruwer

Supporter

How do you unclog a washing machine drain line?

A few different methods can clear the drain pipe of debris and get it back to draining water the way it was designed to.
  1. Locate your drain behind or under the washing machine and detach the tubing or pipe to access the actual drain.
  2. Clean out any blockage inside the pipe with a plumber's snake.

Demetria Dill

Beginner

How do you fix a washer that won't spin or drain?

Check for clogs in the drain hose and drain pipe
Set the washer in the spin mode and see what happens. If the water won't drain, turn the machine off, pull the drain hose out of the standpipe and check for a clog at the end of the hose. Sometimes lint or debris can build up in this area and prevent draining.