Asked by: Erol Widenmann
home and garden smart home

How do you make a simple roman blind?

Last Updated: 28th April, 2020

How to make a Roman blind
  1. You will need. 2.5cm-square wooden batten the width of the blind.
  2. Fix your blind's supporting structure.
  3. Work out the size of your blind.
  4. Line your blind.
  5. Create dowel pockets.
  6. Create the pleats.
  7. Make pockets to hold the dowels at each of the pleats.
  8. Fix the dowels in place.

Click to see full answer.

Similarly one may ask, how are Roman blinds made?

Roman blinds are made from fabric that is designed to pleat when raised. The blinds are constructed by mounting slats, which are connected to cords, into the back of a fabric panel. When the blind is lifted, the cords pull the slats together and force the blind to fold into pleats.

Similarly, can you make your own blinds? Blinds make for great window coverings and decorations, but store-bought ones can be expensive. Save money by making your own at home. You can make a basic blind by sewing together fabric and fabric lining. To roll up the blinds, repurpose parts from old store-bought ones or sew dowel rods onto the fabric.

Simply so, how do you pull up blinds?

To raise the blinds, pull the string down and then slightly to the right to lock it in position. To lower the blinds, unlock the cord by pulling it slightly to the left. The blind will begin to lower. You can let it lower towards the bottom or stop it in the middle and lock the cord in place by pulling it to the right.

How do you make shade cloth blinds?


  1. Cut the Coolaroo shade cloth to size.
  2. By hand or machine, sew either end of the Coolaroo shade cloth.
  3. Insert the 25mm (1”) beading at one end of the Coolaroo shade cloth to form the head rail.
  4. Using the self tapping screws, fix pulleys 6cm (2-1/3”) in from either end of the head rail.

Related Question Answers

Meili Patrick


How do you make Roman blinds with tape?

Sew a plastic ring to the loose edge of each Roman blind tape, placing them five centimetres in from the side edges of the blind. Sew a third ring to each tape at the center point. Knot a length of cord to each of the bottom rings and thread the cords vertically up through the rest of the rings.

Claus Naethe


What are Roman shades blinds?

Roman shades are a type of window covering used to block out the sun. Roman shades are different from standard window shade in that they stack up evenly when being opened; however, when they are open they are visibly smooth, not bumpy or ribbed like typical vertical shades or blinds.

Guaire CaƧoo


How do you make outdoor shade blinds?

How to Make Outdoor Blinds
  1. Measure the height and width of the opening where you would like the shade to hang, then cut enough fabric for this area, adding 2 inches to the top and 1 inch to the bottom and sides.
  2. To create a rod pocket at the top of the shade, fold the fabric over, forming a 1-and-1/2-inch opening.

Mandiaye Sarasate


How do you recover a Roman shade?

  1. Step 1: Find your pattern center. I'm a little (ok, a lot) OCD about things lining up, so this is the hardest part for me.
  2. Step 2: Cut your fabric length.
  3. Step 3: Attach the fabric at the top of the shade.
  4. Step 3: Create your folds.
  5. Step 4: Attach the fabric to the shade.
  6. Step 4: Hem the bottom.
  7. Step 5: Hem the sides.

Janeth Minguela


How do you make a faux Roman shade flat?

How to Sew a Faux Roman Shade
  1. Step 1: Cut your lining fabric.
  2. Step 2: Measure for your side seams.
  3. Step 3: Sew the side seams of your faux roman shade.
  4. Step 4: Prepare your edges to be sewn.
  5. Step 5: Sew the sides of your faux roman shade.
  6. Step 6: Sew the bottom seam of your faux roman shade.
  7. Step 7: Attach your lining.

Sonja Belbachir


Can you turn curtains into Roman blinds?

I've tried making over curtains into Roman blinds with mixed results. Again, it's not noticeable until you lay the fabric flat and try and cut an accurate rectangle to make your blind. So your blind may not be as tight and crisp as if you had used a brand new fabric.

Ladislaa Calveley


How do you tie a Roman shade?

How to Tie Tie-Up Shades
  1. Fold the shades up from the bottom to raise them.
  2. Grasp the ties hanging down from the shades.
  3. Tie the two ties on the left side of the shade together in a standard bow.
  4. Tie the two ties on the right side of the shade together in a standard bow using the same technique you used on the left side.

Rose Rusillo


How wide can a Roman blind be?

Made-to-measure Roman blinds are available up to a maximum width of 300cms (118''). As this width requires more than one width of curtain fabric it will have neat joins, with the pattern matched where necessary, to achieve your required width.

Erkuden Swatlosk


What fabric is best for Roman blinds?

Cotton and cotton blends, linen or jacquard
These are the best fabrics for Roman blinds. All medium thick, non-stretchy fabrics create a crisp, sharp folds that remain straight and true, giving the blind a professional finish.

Yuri Fourre


Do Roman blinds look better in the recess?

In summary, for Venetian, roller and vertical blinds, we would recommend they be hung from within the recess. However, Roman blinds would be better suited outside the recess, as they are able to let more light enter into the room.

Atif Camafreita


Are Roman blinds good?

They're great where space is tight
Blinds are the ideal solution when curtains would get in the way of furniture or radiators. But if you want a softer, cosier look than rollers or Venetians, Roman blinds are the answer. Here, the darker shade of the blind adds definition to the white walls and woodwork.

Gabija Brendemuhl


Should Roman blinds be inside or outside recess?

If you have little or no flat wall space to either side of your window then it may be better to consider mounting your Roman blind inside the recess. Ideally Roman blinds mounted outside of a window recess should extend a bare minimum of 5cms (2 ½ “) to either side of the window.

Bassem Natasha


Should Roman blinds touch the window sill?

This means all of the bottom of the blind will touch the window sill. If you use the shortest drop measurement. You will end up with one part of the blind touching the sill and the other not.

Unni Hopf


How much fabric do I need for Roman blinds?

The number of fabric widths required is found by dividing the Cut Width by the Fabrc Width and rounding up to the next whole number. of the fabric add a 5cm heading allowance and a 9cm hem allowance to the finished blind length.